Search results

  1. smittyb

    Any pics of gaugeplate.com gauge cages?

    Does anyone have any pics of the Gaugeplate.com AC vents installed? And if so, how was fit/finish/installation? Thanks.
  2. smittyb

    clearing cel codes

    I can't seem to clear my KAM codes. I tried pulling the jumper during the test(twice), turning the key off during the test, and pulling the batt cable during the test. Nothing has worked. I cleared the CM codes, but can't get the KAM codes to go away. What am I missing here?
  3. smittyb

    Nighthawk Lights?

    Is anyone familiar with GE Nighthawk lights? Just ordered a set off ebay, they were cheap, supposed to be pretty bright and last like 3 times longer than Silverstars. I don't think they are going to be as white as Silverstars. Just wondering if anyone has used them.
  4. smittyb

    Ring filer

    I was wondering if anyone local has a ring filer I could borrow. I need to shave off quite a bit of my pre-fit rings, and really don't feel comfortable with a bastard file. I could come pick it up and bring like some of your favorite beverage? Thanks. P.S. If anyone has one of those mega...
  5. smittyb

    Engine Balancing Questions

    I just picked up my parts from the machine shop, where I had my rotating assembly balanced for my new pistons. The balance shop included a card with some specs, and I was wondering if some one could tell me exactly what they meant. I understand the balancing proceedure, just not what they have...
  6. smittyb

    Anyone use Probe Pistons?

    So, I just got off the phone with the sales rep at Probe. According to him, there is absolutely no difference between their FPS pistons and TRW forgings. On Probe's own website, they had this to offer: Forged of VMS-75 High Silicon Aluminum for lasting performance. Light weight forging...
  7. smittyb

    Valve cover to TB line help

    I am going to install a set of Trick Flow VC's that do not have an internal oil baffle. There is no room to install a baffle. Does anyone have any ideas on how to help prevent/lessen the oil from entering the TB? I know I can install a filter inline, or a catch can, but I was wondering if...
  8. smittyb

    One piece oil pan gasket

    I just found out FelPro makes a one piece rubber oil pan gasket. Has anyone had any experience with these? It say not for racing use. Why would that be? Thanks.
  9. smittyb

    I want an animated avatar!!

    Who do I have to shank in this place before I can use my super cool animated avatar like tons of other people already have? Moderators help me out on this.
  10. smittyb

    Trick flow valvespring ?'s

    Does anyone know the spring rates for the Trick flow upgade springs? All Summit or Trick Flow has is the110lbs at 1.8". How aboout an open pressure? Sorry, double post.
  11. smittyb

    Trick flow valvespring ?'s

    Does anyone know the spring rates for the Trick flow upgade springs? All Summit or Trick Flow has is the110lbs at 1.8". How aboout an open pressure?
  12. smittyb

    Dyno results

    Well, had my junk on the dyno today. Best was 219hp/279ft/lb. Probably more torque, but converter was flashing to about 3400 rpm. First pull was horrible, I've got to destroy the cheap POS timing light I have, it was waaay off. It was running lean throughout all the pulls, couldn't get that...
  13. smittyb

    Marysville speed and custom

    Just wondering, does anyone have any experience with Marysville speed and custom? I am going to have my junk dynoed there to lay down some baseline numbers. I guess I will be going back there, so it dosen't matter too much, but just curious if anyone had any opinions.
Top Bottom
Back
Forums
Menu