Search results

  1. U

    What to do w/ empty fog light holes???

    When I got my GT it had some cheap looking aftermarket fogs in it, so I took them out as well as the braces for them. I don't want to go back w/ fogs, but does anybody have any clever ideas of what to do with the holes??? :D
  2. U

    Please Help!! Power Window Trouble!!

    When I bought my 92 GT the power window switch on the passenger side was missing and the passenger side window would not roll down. I ordered a switch fron 50 resto and put it on. The window will now roll down, but will not roll up. I went and got some jumpers and determined that the motor works...
  3. U

    Need help with ignition trouble!!!!

    Here's the scoop...92 GT w/ MSD 6al and Accel coil. No spark. I have power to the MSD, but no power to the coil. It was running when I pulled the engine to rebuild. What to try first?? I really don't have $200 to plunk down on a new MSD. Does the MSD have a fuse??
  4. U

    How to adjust hatch on 92 GT?????

    The hatch on my GT doesn't seem to line up very well. What do i need to look for? The latch? The hinges?
  5. U

    ATTN Thumper and other head guys..Can I port heads, AFTER a valve job???

    Some of you may have read where a local machine shop took me for $600 to refresh my stock heads. My ? is, can I take the valves and seals out, and port them a little bit, reassemble them and put them on??? What if I hit a guide??
  6. U

    Did I get screwed???

    92 GT needed refreshing. Tore it down and determined I could just re-ring, bearing, and put it back together. Called a local machine shop that is supposedly "The Ford" place and asked him how much to refresh the stock heads and open them up a bit. He says "We can get them to flow alright for...
  7. U

    Did I get screwed??

    92 GT needed refreshing. Tore it down and determined I could just re-ring, bearing, and put it back together. Called a local machine shop that is supposedly "The Ford" place and asked him how much to refresh the stock heads and open them up a bit. He says "We can get them to flow alright for...
  8. U

    Anybody here done a "Ghetto Overhaul"??????

    You know, tearing her down and honing the bore and polishing the crank journals. Then reassembling w/ new bearings, rings, and seals and reusing the stock pistons, rods, and crank with NO machine work. Opinions....thoughts....pointers???? I am not on a budget......I am robbing from Peter to pay...
  9. U

    Who here has done a "ghetto overhaul"?

    You know, tearing her down and honing the bore and polishing the crank journals. Then reassembling w/ new bearings, rings, and seals and reusing the stock pistons, rods, and crank with NO machine work. Opinions....thoughts....pointers???? I am not on a budget......I am robbing from Peter to pay...
  10. U

    Smoke coming from back of intake....

    Well, I posted this in the other forums, but you guys are the best at helping. I bought a 92 GT and after the car warms up, it puffs a little smoke from the back of the intake around the PCV valve when you rev it. Could the grommet be bad? Or is this a sign of a worn out engine?? It doesn't...
  11. U

    GT-40P head combo....Spark plug issues????

    I would like to do a P head, E cam, and Eddy intake combo on a 91 LX. How can I make it work w/ standard shorty headers??? Special plugs??? Wires??? HELP!!!!!!! Also, what kinda power can I expect from this combo?? Can I use the stock fuel system and TB and mass air???
  12. U

    GT-40P head combo....Spark plug issues????

    I would like to do a P head, E cam, and Eddy intake combo on a 91 LX. How can I make it work w/ standard shorty headers??? Special plugs??? Wires??? HELP!!!!!!! Also, what kinda power can I expect from this combo?? Can I use the stock fuel system and TB and mass air???
  13. U

    Are fenders different between 87-90 GT and 91-93 GT??????

    Title says it. Will fenders from those years interchange?? What about front bumper covers???
  14. U

    Going Fox.....

    Please don't banish, flame, whoop up on me, or talk about my mom too bad. I bought a Fox, and will probably be trying to sell my 95. It's a 91 LX 5 speed w/ full MAC exhaust. I think I will enjoy it more than my 95 because of the 5 speed, it's lighter and faster, and cheaper to mod. I'll still...
  15. U

    May be selling the 95. What should I take off the car and sell?????

    Mods in the sig. I will be getting a fox body GT. What parts should I pull off to sell seperately, and what should I ask for the car?
  16. U

    351w have special headers????

    I am looking into buying a 92' GT that has a 351w w/ a spun rod bearing. I will be taking the engine out and replacing it w/ a 302. It has GT-40 heads and BBK headers. Can I reuse the heads and headers on the 302, or are they different?? Someone said that 351w require a different set of headers...
  17. U

    Two different TPS's for our cars???

    I have been having an issue where my car bogs a bit if I hold the gas pedal to the floor, as opposed to letting it off the floor SLIGHTLY. One suggestion was the TPS being bad, so I called my uncle to get one, and he says I have to get a part # off the TPS so he can get the right one. I even...
  18. U

    Phenolic spacer w/ Eddy and stock hood????

    I just got an Edelbrock intake from the classifieds and it came w/ a phenolic spacer. Will the intake clear my hood if I use the spacer???
Top Bottom
Back
Forums
Menu