Search results

  1. what9612

    How I Did My 1.7 To 2.2 Kenne Bell Swap 2v

    I currently have a 1.7 Kenne Bell on my fully forged 302 stroker. The blower is just way too small for my setup. I cant afford to buy a whole new 2.6 kit, so i found a used 2.2 blower only on ebay and decided to make it work. Of course the guy told me it would directly bolt on to a 2v with no...
  2. what9612

    Knocking from engine after low oil

    my car usually makes at least 11lbs of boost, then yesterday it was only making 5. so i took it to my parents to check it out and on the way it started knocking. checked the oil and NOTHING showed up on the dipstick, so i drained the oil and put new oil in, noise is still there. pretty sure i...
  3. what9612

    LMAO Vtec Cobra, Dunno if this is old or not

    im sure some of you have seen this but if u havent...... YouTube - VTEC Cobra
  4. what9612

    exhaust hitting rear end

    what is this? when i hit bumps this thing hits my exhaust. can i cut it off?
  5. what9612

    Went to the track last weekend

    my best for the car was 11.87 @ 120, but it was quite abit warmer so i knew i wouldnt get as much mph as i did that day, but still happy YouTube - 2000 Mustang GT Kenne Bell 1.7 @ Ubly Dragway 6-6-09 stickys and a jack in the trunk
  6. what9612

    Another wingless thread

    i was going to move my spoiler back, but then i decided to take some pics with it off. what do u guys think? OR
  7. what9612

    FRPP Aluminum Driveshaft with auto?

    i was going to buy one and i noticed it says manual only. then i read this. "You can swap the front yoke off the stock driveshaft onto the aluminum driveshaft that is built for the manual transmission. The rear flange is the same on all cars, auto or manual." is this true b4 i buy one?
  8. what9612

    KB 1.7 + Meth= 11's

    last time i went to the track the best i could manage was a 12.25 @111 with a 1.8 60ft time. since then i installed long tube headers and got some meth injection and a new tune. car was at 365rwhp and 411rwtq after meth and headers 398rwhp and 440rwtq Videos YouTube...
  9. what9612

    Normal operating trans temp?

    i jus installed a b & m trans cooler and a trans temp guage. i went out for about a 20 min cruise and the needle isnt even hitting a hundred, it moved a lil bit but not to 100. the fitting is hot and so are the lines. do i need to drive longer to see a temp or is this not right
  10. what9612

    How To: Make Your Pass Window 1 Click Down

    this is so easy and cheap todo. and u only have to cut 1 wire first goto PonyPerformance.com and order the kit pop off the thing on the door connect 5 wires and put back 2gether
  11. what9612

    intercooler fluid temp

    my intercooler pump sits underneath my cai, and it hasent been styaying primed. i found out that is the old location and will call kb in the morning to get the new brackets and hoses. anyway with all the trouble i was thinking of keeping an eye on my fluid temp. has ne one else done this, and...
  12. what9612

    LOL funny video

    Episode svt vs ls1tech
  13. what9612

    tubular k members.......

    ive been debating gettin one. i see there are tons of different ones. are there any u can use ur stock springs on? what are some of your setups? what control arms? just lookin for some info
  14. what9612

    Driveway Longtube Install Progress plus more...

    i bought a pair of used mac longtubes with a brand new mid pipe for $380 shipped. the longtubes were way more rusted than they looked on the pic, so i had them sandblasted and threw some header paint on them.(prolly wont last but o well) i got a couple little projects goin on so i got some...
  15. what9612

    Clicking sound coming from around glove box

    lately ive been gettin a clicking sound coming from the glove box area, it almost sounds like a relay going on then off. any clue where to start?
  16. what9612

    anyone with a battery relocation kit?

    was debating if i should pick up a cheap one from summit or not. anybody buy a kit or have some pics to share? thanks
  17. what9612

    looking at weld prostars need help

    I found some weld prostars for a good deal with tires.the question is will they work or will I need spacers or something. The fronts are 15 x 3.5 and the rears are 15 x 8 with 5.5 backspace. Have an 00 GT. thanks
  18. what9612

    New track times!!!

    1st Run 2.0560 60 ft 12.7248 1/4 mile 110.07 MPH 2nd Run 1.8755 60 ft 12.5640 1/4 mile 109.54 MPH 3rd Run 1.8234 60 ft 12.3176 1/4 mile 110.61 MPH 4th Run 1.8276 60 ft 12.2514 1/4 mile 111.16 MPH Before the last 2 runs i put ice on the blower and let...
  19. what9612

    First time ever doing a 1/4 mile with slips

    Video of the good run http://www.youtube.com/watch?v=1DGLAvLml3s Went to the track for the 1st time 2day and got 3 runs in. Its definitely alot harder than it looks. I had 3/4 Tank Gas, No Spare, Sub and amp still in the trunk *******Both Slips on the left...
  20. what9612

    PPL with MAC off road h pipe come in....

    i have a mac off road h pipe and flowmaster 40's (im sure im the only one with that combo) :rolleyes: my question is does everyone elses always sound like its leaking? i check for leaks all the time but never find anything. then i tighten it all up and it sounds better for a day or 2 then...
Top Bottom
Back
Forums
Menu