Search results

  1. subtlebeast

    Post Your Newest Stang Pic, 94-95 Cars Only.

    Latest pics.
  2. subtlebeast

    High capacity fuel tank?

    If you don't mind a rear sumped tank check thses out: Glenn's Performance
  3. subtlebeast

    What Fuel System Set Up's For Those running Boot 500HP+

    Also check out Glenns Performance. take a look at behind bars for the raisl. Alot have issues clearing the dist cap on a sn95 set up. I am running dual walbros and a sump.
  4. subtlebeast

    Aeromotive A1000 Pump Failure

    Some feel you need a controller if they are driven on the street, but you probably need to check with aero. You can always run a weldon. I am running a dual walbro set up and it seems to be doing well, but it's only a few months old.
  5. subtlebeast

    is dynomax exhaust ok?

    I have 3" ultraflows and love them.
  6. subtlebeast

    Post Your Newest Stang Pic, 94-95 Cars Only.

    I don't think it would have cleared either the intake or the tubes, but I am going off memory. I can go take a look at it and confirm if you need me too.
  7. subtlebeast

    Post Your Newest Stang Pic, 94-95 Cars Only.

    Thanks 94gsl5.0. Yeah, it's a YSi teamed up with a 347 dart sportsman.
  8. subtlebeast

    Post Your Newest Stang Pic, 94-95 Cars Only.

  9. subtlebeast

    Fuel Sump?

    Rear Sump I have one of Glenn's kits with a rear sumped tank and I have had no issues below 1/4 tank. The only negative for me is the sump is pretty big and sits kind of low. I know the sleeper tanks are supposed to do pretty good too. Good Luck.
  10. subtlebeast

    Anyone running a sn95 fan as a pusher?

    Thanks HISSIN50. I'll try Turbo Mustangs. We are going to try it and see how it does. I guess I can be the guinea pig. If it doesn't work ,I explore different options. Thanks again!!
  11. subtlebeast

    Anyone running a sn95 fan as a pusher?

    I am running a fluidyne. My buddy tried moving the radiatior forward to where the condensor was and there still wasn't enoough room. Do you think it will flow enough if we just reversed the polarity and didn't flip the blade? The other option is to go with a contour fan, but I want to avoid...
  12. subtlebeast

    Anyone running a sn95 fan as a pusher?

    Hi, Has anyone run a sn95 fan as a pusher? The fan will be where the condensor usually goes in front of the radiator. I know it will physically run this way, but how does it cool? There isn't enough clearence for my 10 rib set up and I don't want to have to replace the fan unless it's...
  13. subtlebeast

    Meguiars Ultimate Quick Detailer

    Don't do it if it has rain on it. Rain has alot of dirt and contaiments that can harm the surface if you rub it in. If it's dust from your garage you can hit it with a duster and then give it a spritz.
  14. subtlebeast

    can anyone recommend a good gps

    If you are a Costco member you can pick up the Garmin NUVI 650 for $299. It's a good unit.
  15. subtlebeast

    Weld Rim help

    Welds with cobra brakes Here is alink I had saved a while back: http://www.corral.net/forums/showthread.php?t=702969
  16. subtlebeast

    For those who have done the FOX tb conversion?

    Accufab makes a nice 2" blank spacer..
  17. subtlebeast

    Difference between flowmaster 40 series mufflers..

    Check out the super 44 too. I just picked up a pair, but they won't be on for a bit since my motor is not done yet. They are supposed to be there best flowing two chamber.
  18. subtlebeast

    Bullit wheels on 94-98 pics?

    18x9 and 18x10 265/35/18 up front and 285/35/18 on the rear
  19. subtlebeast

    Any one running Accufab Headers on a 95?

    anyone?
  20. subtlebeast

    Any one running Accufab Headers on a 95?

    I was looking at 1-3/4" Accufab headers for a D-1 blown 363c.i. combo and was wondering if anyone was running them. If so, how are they in regards to fitment. Also, any pictures?
Top Bottom
Back
Forums
Menu