Search results

  1. S

    www.bieberfever.com T-5 Swap

    Don't buy from AMP for mechanical parts I wouldn't buy anything from amp that you expect to work. I live in phoenix and those ******es have no clue as to what they are doing. they will change their story on you three times and end up working you over for an extra 500.00. and 199 for a...
  2. S

    Cluch adjustment

    I'll check it all out. Since this is a 5 spd. conversion I thought maybe something didn't line up quite right.. and that adjustable cable is a pain, I'll probobly be replacing that in the next week or so also. I'll let you guys know how it goes. thanks
  3. S

    Cluch adjustment

    I've got what I believe to be the worlds worst clutch, it's fairly new also. maybe 30k on it as a daily driver and it's been the same way since the day I put it in. Here is what I've got: Billet Steel flywheel, FMS Cobra clutch & PP, adjustable clutch cable, adjustable firewall piece, and...
  4. S

    Arizona Emissions Help!!!

    I have firends with 347's that are not emission friendly so they toss a set of cats in and make sure all your other emission stuff is insalled, even though it's not doing anything.... and create a vacum leak... the vacum leak will take care of everything for you. you just can't make it...
  5. S

    No fuel psi at key on

    I had the exact same problem TWICE! Once it was the inertia switch.. check this first.. its in the trunk under the plastic right next to the driver side tail light. the second time I had the problem was when I ran a NEW pump for about 3 weeks and the pump died! yea... it still primed but...
  6. S

    frpp spring questions c/c and height drop

    I have C springs and I LOVE them.. you MUST replace the isolators at the same time as installing them though.. one of my buddy's has B springs and his car blows cornering and the ride just isn't as good.. I have no problems with my car other than sometimes I scrape my exhaust on the driveway...
  7. S

    68 302 block to a roller block

    I've read just about every thread about converting a non-roller block to a roller block and none of them specifically say if you can take a non roller block with stock hydrolic roller hardware. So my question is can I take a 1990 302 block and a 1968 block and just tap the holes where the...
View older results
Top Bottom
Back
Forums
Menu