Search results

  1. R.J.

    IAC restrictor plate installed!

    If you get a custom tune then you should not need a plate.
  2. R.J.

    should i bother to dyno tune

    Start by getting some MSD wires!
  3. R.J.

    ?for anyone with cobra brakes..

    If you do the upgrade you can get 13in drilled and slotted rotors from NAPA for @$70. They are the Napa brand are they work well.
  4. R.J.

    Rocker arm adjustment

    If they are stock then they do not require adjustment.
  5. R.J.

    Parts Diagrams

    Check out this web site they have exploded views of all of our parts. Tousley Ford Parts Depot
  6. R.J.

    IAC restrictor plate installed!

    That is the install directions and this is the idle reset directions. Try resetting your idle with the following procedure. If your idle problem is NOT being caused by a bad part or vacuum leak then I have never seen this not fix the problem! Begin with a cold vehicle. The idea here is to...
  7. R.J.

    IAC restrictor plate installed!

    DIRECTIONS: This is for anyone that doesn't like when the RPM's that are slow to drop or even rise slightly when you push the clutch in to shift. Another symptom, is that when cruising in a higher gear and you let your foot off the gas, the car almost cruises on its own for a bit. First...
  8. R.J.

    Offset Steering Bushing

    did they do anything for the bumpsteer?
  9. R.J.

    IAC restrictor plate installed!

    I will mail it tomorrow.
  10. R.J.

    FRPP 70mm Throttle body, TPS adjustment?!

    Try resetting your idle and TPS with the following procedure. Begin with a cold vehicle. The idea here is to get the car to a firm cold idle with enough air bleed capacity left in the idle circuit for IAC adjustment. The idle stop should be set first. Back out the idle stop screw, away...
  11. R.J.

    TPS adjustment - couldn't find answer

    Try resetting your idle and TPS with the following procedure. Begin with a cold vehicle. The idea here is to get the car to a firm cold idle with enough air bleed capacity left in the idle circuit for IAC adjustment. The idle stop should be set first. Back out the idle stop screw, away...
  12. R.J.

    IAC restrictor plate installed!

    I found one, it must be the one I had in my car before I got it custom tuned. Just PM me your name and address and I will mail it to you.
  13. R.J.

    IAC restrictor plate installed!

    I will have to look around.
  14. R.J.

    What quadrant and firewall adjuster to go with?

    Call Lethal Performance and get the Fiore set-up with a stock cable. This will give you by far the best set up out there.
  15. R.J.

    Broken Differential

    PM sent
  16. R.J.

    best clutch

    Go to promotionpowertrain.com and give them a call. They put together custom kits to match your setup using Mcleod parts. Try finding somebody talking bad about a Mcleod clutch! just my .02
  17. R.J.

    Severely annoying starting problem..need opinions

    You need to check your fuel pressure.
  18. R.J.

    high idle...unplugged IAC w/ no change

    Try resetting your idle with the following procedure. If your idle problem is NOT being caused by a bad part or vacuum leak then I have never seen this not fix the problem! Begin with a cold vehicle. The idea here is to get the car to a firm cold idle with enough air bleed capacity left in...
  19. R.J.

    Plenum Combo

    Get the professional Products pieces. They are the cheapest and they are still nice quality and make power.
  20. R.J.

    keep loosing coolant at radiator cap area.

    PM sent
Top Bottom
Back
Forums
Menu