Search results

  1. NOSNotch

    Anyone convert manual door to power?

    I got a matching door from my buddy for my 93 but only problem is its manual windows and locks and its a power option car. I have the door i pulled off which is full power so im wondering how much of a pain it is to swap the stuff over? for anyone thats done it, will i need any special tools...
  2. NOSNotch

    Weld skinnys on a 98?

    My buddy wants to put Prostar 3 1/2"s & 8"s on his 98 but what needs to be done for the skinnys to work up front? i tried a search but cant seem to find the right info. thanks guys kevin
  3. NOSNotch

    Anyone using mac upper and lower control arms?

    whats up guys, just wonderin if anyone is using the solid upper and lower mac control arms. What kinda 60's are you gettin with em and are you happy with them? thanks kevin
  4. NOSNotch

    Best cam for a stock motor....need a stright answer

    :stupid: Well you didnt really say what you wanna do to the car, whether your gonna bolt up a set of heads or what you want it to run? I would go with a b cam if the only thing you plan to do with the motor is the cobra intake, if your gonna bolt on a set of heads and not get too crazy with...
  5. NOSNotch

    Widest 15" rear tire possible on a Fox Body

    275 will fit with only slight hammering and i think at least a quad shock flip. My buddy has 295s on his coupe with a little help from a sledge, no quads and eibach drags
  6. NOSNotch

    31 spline.... FMS Eaton or Auburn

    Ready to order my axles and everything and im hearing bad stuff about all 3 from a bunch of friends so just wonderin what you guys are runnin. Gonna be in a 400hp street car 5speed launching on slicks at the track. thanks kevin
  7. NOSNotch

    tubular K-member....

    The PA is available with spring perches on the k and the arms. I paid around $725 shipped on mine. http://paracing.net/
  8. NOSNotch

    Whos runnin a spool on the street?

    Im ready to order 31 spline axles for my car and undecided on whether im goin with a spool or somethin like an auburn. Im leaning towards a spool though and just wanted to get some opinions from anyone thats running one. How streetable are they and any problems on turns and all that? thanks kevin
  9. NOSNotch

    tubular K-member....

    Ive gotta pa racing tubular K and A arms in my 93 and bolted right up and no problems except a slight issue with the bushings in the A arms. Bolted a D&D setup in my buddys car with 0 problems also. Good luck with is kevin
  10. NOSNotch

    trac-loc tricks?

    Im gettin ready to rebuild my trac-lok this weekend and prob gonna do the alternate clutch stack. Does it hurt anything to leave the s spring out? Or is it not really worth it to leave it out since i dont do any AutoXing?
  11. NOSNotch

    Front end damage - radiator support bent badly...Tech advice please

    I dont think just a rad support is gonna fix that perfect and like ss93 said if you get it close just to sell the car than can make you look bad and make it very hard to sell any of your future projects. If you want to stay with a stang id say go looking for a decent rust free 4cylinder and do...
  12. NOSNotch

    03 Clutch recommendation??

    I searched and found a few ideas but wanted to get some more opinions before ordering. My buddy has an 03 cobra w/just under 600hp and hes been going thru spec stage 2s like they're stock replacements. Can anyone recommend a clutch that will hold up? Ive seen alot of cobra guys like the mcleod...
  13. NOSNotch

    Need Help! Car wont start after Carb Conversion...long

    When you bumped the motor over til it blew out #1 you shouldnt have really had to turn the motor. Did you drop the distributor in with the 0 line on your balancer centered in the round hole on your timing pointer? That would be the first thing id check and definitely gotta get a fuel pressure...
  14. NOSNotch

    Car wont start

    You didnt say exactly what you installed. Since your moving the battery to the trunk, maybe you removed a ground and skipped over putting it back on or maybe theres a connector unplugged somewhere? If you had your distributor loose/out make sure your timing isnt way off. Im assuming your EFI so...
  15. NOSNotch

    Battle/Torque boxes???

    the torque box is the actual "box"? in which the upper and lower rear control arms mount. Battle boxes are torque box reinforcements which are def recommended especially if launching on slicks
  16. NOSNotch

    Subframe connectors

    Ive got wild rides full lengths on my coupe. also have t braces on the seat bolts. Paid about 100 bucks for em
  17. NOSNotch

    Front control A-arm Bolt sizes and removal ?'s

    I got a few stock bolts layin in my box at work i think, if you still need one or two lemme know and i can hook it up kevin
  18. NOSNotch

    Why

    I dont think the 4.10s are really helpin ya out with the c4, what are you shifting at and do you still have the stock limiter?
  19. NOSNotch

    Can The 92 GT Cheesegrate Taillights be Replaced?

    An LX taillight assembly from 87-93 will bolt right in place of the cheesegraters. I would check stangnet classifieds or corral.net and you'll probably find a set, if you wanna go new I know 50resto.com has em. good luck
  20. NOSNotch

    some carb questions from a newbie

    that carb doesnt look too fresh so i dont know, in your last pic there i cant really make out the #s but the one that starts with 4 should identify the carb 4777 is a 650 4779 is a 750. No choke from what i can tell and im not positive on the mixture screws but with how your cars running if its...
Top Bottom
Back
Forums
Menu