Search results

  1. D

    Torque settings for strut rod

    Hey guys...just getting my stang back on the road after a couple years now, and I need the torque setting for the front of the strut rod where it attaches to the frame, and where the rubber bushings are. My factory manual tells me the torque to the control arm, but not for the front(or they...
  2. D

    a-ha! Found the noise in my suspension!

    Don't know how I missed this when I pulled the wheels off about 6 months ago, but the spring perch bushings are completely shot, think I may go ahead with some roller perches, and replace the springs with lighter ones than the 620's. Looking back I can't belive the suspension kit didn't come...
  3. D

    Recommendations for jumpy suspension?

    Hey all, I've got a 64.5, that I installed a grab-a-track suspension on a couple of years ago, with the 620 sprints and the upper control arm lowering kit with ball joint wedges(it was more than the standard 1" shelby type drop), and I had it aligned by a reputable mustang guy. Well I haven't...
  4. D

    Should I go with gt-40 heads?? Help!!

    Hi all, My engine is being rebuilt right now and I've been thinking about possibly adding different cylinder heads to the mix but need more opinions first. Here's the setup as it is, .40 over, fs 260h-10 high energy cam(although this can be replaced), edelbrock rpm manifold, holley 600cfm...
  5. D

    Q about installing 1 1/8 front sway bar

    OK guys, I went to finish up my suspension package(grab-a-trak) and the sway bar was the last piece which I thought would be easy enough. But once I got it up in place, I realized there is no way it will fit without grinding a big notch out of the frame where it is hitting. Is this normal? There...
  6. D

    rear spring eye bolt

    OK guys just trying to finish up my suspension install, flying through(after an initially slow start learning the tricks for the front) the install until I hit the front rear spring eye bolt. One the first side I'm committed to a sawz all affair to get the spring off(almost there with about...
Top Bottom
Back
Forums
Menu