Search results

  1. EDC

    Engine Combo?

    Get the GT40 heads stripped down and checked at a "quality" machine shop. Most times a properly done, multi-angle valve job done on a Serdi machine will get you some good gains. If the guides are tired, pick up some replacement one-piece stainless valves and bronze line the guides for an exact...
  2. EDC

    Please educate a 5.0 noob... how much power can I make?

    :jaw: Wow is that thing shweeeeet! :nice: Let's start making some "power" for her. Ed
  3. EDC

    Please educate a 5.0 noob... how much power can I make?

    Hi Chris, Keep your head down over there! As for a Hummer cam, just add some propane to the mix. Sweet! Ed
  4. EDC

    Please educate a 5.0 noob... how much power can I make?

    Just check the year and condition of the shortblock before you tear into it. You would be surprised what can be done with those lil 302 engines. ;) Ed
  5. EDC

    Please educate a 5.0 noob... how much power can I make?

    Here's my take... Open track cars tend to put a lot of strain on the valvetrain. All my AI and open track combinations use severe duty valves and the PAC nitrided beehive springs and plenty of TLC for long life. It's not like a drag car with a few seconds of rpm. You have to stay out there...
  6. EDC

    Please educate a 5.0 noob... how much power can I make?

    Let's do it! :nice: The 331 or 347 strokers are sweet... Ed
  7. EDC

    Has Anyone Purchased D&D Motorsports 347 Long Block?

    Call Coast High Performance. Ed
  8. EDC

    ONLY 280HP OUT OF THIS COMBO!!!

    The dyno curve is beautiful. No dips or hiccups. It's just a bit low for the parts. I was very concerned about the A/F since it was reading in the mid to low 14:1 range. That is too lean for my taste but with the equipment this shop has, they claim that's where they get the best results. I'll...
  9. EDC

    AFR 165 heads, but what valve springs?

    As with most serious performance shops... We were attending the PRI show in Florida to see what the industry has to offer for 2007. That's why there were no responses to emails for the past week. In terms of valve spring choices.... We have five different spring "kits" available. Best to...
  10. EDC

    Need help finding a 347 crate engine...any suggestions

    X2 I've worked with Rick on many mutual customer projects. Top shelf service! Ed
  11. EDC

    Building a 347 stroker

    Eric, I ship a lot to the great white north and I know about those "tariffs"... What I'm trying to convey is when on a budget, look for "deals", not just cheap. What at first appears to be a good direction to go (keeping those mismatched parts) is really not a good use of your money...
  12. EDC

    Building a 347 stroker

    There is an old cliche' that holds true no matter what BS is spread throughout the internet... "302 parts make 302 power" Anyone who tells you the small stuff that works well on a 302 combo, works the same on a 347 is only blowing smoke up yer azz. If you want to do this "on the cheap"...
  13. EDC

    Best Place for a Small Block

    "Thanks" Rick and I work together on a lot of customer projects... Ed
  14. EDC

    Best Place for a Small Block

    Yup... Rick knows his ****! Ed
  15. EDC

    Help Picking out new cam....

    Good idea! Call Monday with your combo and see what they say... Then call Tuesday.. Wednesday and Thursday... Bet each day it's a different camshaft! At least it's free information, and as always, you'll get what you pay for. Ed
  16. EDC

    HCI :D

    But you'll only do it once!!! Ed
  17. EDC

    HCI :D

    Me? :D AFR 205 set up for hydraulic roller camshaft Edelbrock RPM Air Gap Custom hydraulic roller profile Link style HR lifters Comp Pro Magnum Rockers * Long tube headers * Packages like this rock! I do them all the time... Ed
  18. EDC

    Correct way to get pushrod length

    http://www.holley.com/data/TechService/Technical/Valve%20Train%20Geometry.pdf This should help. :nice: Ed
  19. EDC

    331 STROKER COMPRESSION INPUT NEEDED

    The heads "are" definitely the Chinese Edelbrock knock-offs. I know what PBM and other WDs like them sells. Visit that "other" web site for an 11 page diatribe on how much work it takes to get them "decent"... Save money and get AFR 205 heads right off the bat. They cost more in the...
  20. EDC

    Help Picking out new cam....

    Thanks for the recommendation.... I believe he's already Emailed me but... just in case... The site has the info to contact me.. Ed
Top Bottom
Back
Forums
Menu