Search results

  1. Angus

    Some Clarification: '03 Mach 1 vs '01 Cobra

    Well, if you're going to compare a modded '01 engine to a stock '03 4V I wouldn't exactly call that "Apples-to-Apples". As far as the Mach 1 you mention with "All the bolt-ons" hitting only 295 rwhp, I'd like to see that since my car made only ~ 8 rwhp less with only a drop-in K&N filter in...
  2. Angus

    3.55 gears in the mach1 and 05 mustang

    You just keep thinking you're faster than Mach 1's.... ...those same 4.10's fit Mach 1's too you know.
  3. Angus

    Some Clarification: '03 Mach 1 vs '01 Cobra

    Not trying to revive the flame-fest that the other thread had degraded to, but since there was some inaccurate info posted there... The '03 mach & the '01 Cobra have basically the same shortblock, with the exception of a slight compression increase from 9.85:1 to 10:1. They both have the...
  4. Angus

    Official Tremec 3650 Issues Thread

    Took my Mach in for the 1st time to try & get Ford to fix the 1-2 grind & 3rd gear "Lock-Out" that I've experienced since the car was new. Dealer had the car for several days & test-drove the car numerous times. I even gave them the new part numbers listed in several other threads on this...
  5. Angus

    '01 Cobra vs. '03 Mach 1

    The Mach makes more power & torque throughout the rpm range due to different head design, different intake cams (sourced from the Navigator & the same cams the '03/'04 Cobra use), revised exhaust manifolds, and slightly higher compression. To illustrate the difference, here's my stock '01...
  6. Angus

    used 03 Cobra or New Mach 1??

    Just as an FYI, some stock Mach 1's are in the 12's with no mods whatsoever... ...sticky tires + gears & a few more simple mods can = mid 12's with good driving. :spot: That's certainly stock Cobra territory or slightly better. :nice:
  7. Angus

    Mach 1 Buyer's Remorse

    The only issue you mentioned that Ford won't fix is the rusty 8.8 housing. They don't paint it from the factory (GT's don't get painted housings either), so it's going to rust quickly. There's a TSB for the shaker rattle (mine doesn't even have the problem), there's now parts to fix the...
  8. Angus

    Mach 1 4.10 Gears

    Same here - just had 4.30's put in my Mach & they are AWESOME! I had a ton of other stuff done to the rear-end at the same time as the gear swap - Eaton 31-spline differential/31-spline Superior axles/TA Girdle/Axle tubes welded/SpeedCal installed - and I only paid $200.00 labor for...
  9. Angus

    Mach 1 Stock Mach 1 Vs stock LS1

    WTF are you talking about? The Mach 1 weighs roughly the same as an LS1 F-body (~ 3350 - 3450lbs), and has a slightly better rear gear (3.55 vs 3.42) - it's not like the Mach 1 weighs 2800 lbs & has 4.30's from the factory... :rolleyes: So how is it that the Chevy is at a disadvantage...
  10. Angus

    '99+ GT axle dimensions???

    I need some help from '99+ Cobra owners who have swapped-in a '99+ GT 8.8 solid rear & who have removed the stock axles & installed aftermarket 31-spline replacements. I need measurements from the stock GT axles, specifically: Both axle Lengths (measured from outside of axle flange to end of...
  11. Angus

    Mach 1 Axle Specs different than '99+ GT?

    '99+ GT axle specs??? I need some help from '99+ GT owners who have removed their stock axles & installed aftermarket 31-spline replacements. I need measurements from the stock GT axles, specifically: Both axle Lengths (measured from outside of axle flange to end of axle including C-clip...
  12. Angus

    Mach 1 Mach 1 Axle Specs different than '99+ GT?

    There seems to be a lot of confusion regarding what parts are the same between the '03/'04 Mach 1 & the '99+ GT 8.8 set-up. So far, I've heard/read: ----------------------------------------------------------------------------------- The GT axles are exactly the same as the Mach 1 axles...
  13. Angus

    dyno results after magnaflo catback install

    Torque didn't increase to the same extent due to the fact that modern engines are designed around a certain amount of exhaust backpressure being present.
  14. Angus

    fullineexaust.com

    Good luck getting those parts at that price. Maganflow increased their prices recently, and both parts are a LOT more expensive now... :mad:
  15. Angus

    Bent/Broken gas pedal fix???

    Yep - 2nd mod I did, right after a drop-in K&N filter.
  16. Angus

    Bent/Broken gas pedal fix???

    Anyone know of a fix/modification for the wimpy Ford gas pedal so it won't bend/break? Mine keeps bending, so much that the car won't go WOT anymore. Is the fix a different pedal, or to just modify the stock one? I'm pretty damn sick of bending the pedal back to it's original height...
  17. Angus

    Bent/Broken gas pedal fix???

    Anyone know of a fix/modification for the wimpy Ford gas pedal so it won't bend/break? Mine keeps bending, so much that the car won't go WOT anymore. Is the fix a different pedal, or to just modify the stock one? I'm pretty damn sick of bending the pedal back to it's original height...
  18. Angus

    Eaton vs. Ford 31-spline posi unit???

    What are the benefits of going with an Eaton unit over a Ford 31-spline Traction-Lok posi? The Eaton costs ~ $160 extra - what am I getting for the additional dough? Getting ready to convert to 4.30's/31-spline axles/31-spline posi, and I want to do it right without spending too much extra...
  19. Angus

    Mach 1 hello all,1320

    Great time! Under better track conditions, low 13's are in your future... :nice:
  20. Angus

    Mach 1 the mach 1`s competition?? pics!

    Interesting statement(s) considering Auto Mach 1's have run [email protected] or so with just a K&N & good driving... ...I've yet to see ANY GTO run under a 13.6 - 13.8. :rolleyes:
Top Bottom
Back
Forums
Menu