Search results

  1. Chythar

    anyone own a mach 460 sound sys

    Sunova...dcm0123 is right. I pulled out my old antenna (I removed mine a while back), and it is a two-piece wire. Good catch dcm0123!
  2. Chythar

    Wheel Fitment Help

    Looks like you have some corrosion on the inside of the rim. I had my driver's front wheel fit really tight on my Cobra clone, and it turned out to be a little corrosion on the rim. A little sanding cleared it out and the wheel fit on perfectly. I don't know about that little lip however...
  3. Chythar

    anyone own a mach 460 sound sys

    I've had the Mach 460 in all the Mustangs I've owned, even installed it in one GT that didn't have it. The strength of the system isn't the head units, it's the 8 speakers and three amps. It gets even better when you put sound insulation in the doors to keep the sound from echoing inside all...
  4. Chythar

    95 GT 5.0 - not passing CA smog visual inspection

    The shop I went to did more than take a quick look with a mirror, and the car passed every other test without mods. Did you pass the smog test with the new 'friendly' shop?
  5. Chythar

    95 GT 5.0 - not passing CA smog visual inspection

    I had a Bassani X pipe installed an a 95 GT, and it only had two cats on the pipe. I passed emissions for years with those hi-flow cats. I eventually had to modify the exhaust to add two additional hi-flow cats so I had 4 cats on the car. Before I sold it, the smog tech said that California...
  6. Chythar

    aode to t5 pedal problems

    I did the same swap on my Cobra Clone, and didn't have the problems you're describing. The only electrical thing in the clutch and cable is the neutral safety switch, but it's only active when the clutch is pushed to the floor and it only prevents you from starting the car when the clutch isn't...
  7. Chythar

    Suspension M-3075-D Control Arms - Special Ball Joints?

    I got a set off these control arms years ago, and when replacing the struts last weekend I noticed the dust boots are ripped on both sides. No squeaking yet, but it's a matter of time now. All the old ads for the arms mentioned 'frictionless ball joints' - are the ball joints special for 03-04...
  8. Chythar

    EGR cause to run Rich?

    You are correct, hooking the EGR directly to the intake will cause it to be open all the time. It's only supposed to be open at part throttle. The red hose feeds vacuum to the emission solenoids in the passenger fenderwell. The computer then decides when to put vacuum to the green hose, which...
  9. Chythar

    1994 gt. Wiring

    It's exactly that, it suppresses electrical noise from bleeding into the stereo speakers. When it goes bad, you can hear crackling in the speakers that can sometimes change when you rev the engine.
  10. Chythar

    94 mustang gt kinda starts

    You can get stored codes that can give you a clue as to the problem, so running a KOEO test to get any stored codes is worth the effort. Also, let's just make sure - the CEL should come on when you start the car, just for a little bit. It's a safety feature to show that the CEL is still...
  11. Chythar

    1994 Mustang 5.0 - rpms drop when pressing gas while stopped.

    Yup, I got a 157 code when my MAF died. They're pretty cheap these days, so it's worth replacing and see if it helps.
  12. Chythar

    94 GT interior

    Yup, you have a V6 driver's seat. Too bad you're not in the Los Angeles area, I have a set of black GT seats that need a new owner.
  13. Chythar

    Need to replace the output shaft bushing on your T5? Here's the tool to get.

    Well, the tool I bought didn't say it worked on a T5 but it worked on an AODE and 4R70W. So you should be fine.
  14. Chythar

    Cobra Engine is IN! (the conversion continues)

    I don't have any experience on the 96+ cars, but I think the 94-98 V6's were the same including motor mounts. To me, this would mean that the 96-98 k-member would work for a 94-95 5.0.
  15. Chythar

    Cobra Engine is IN! (the conversion continues)

    Nope, the k-members are identical in all 94-95 Mustangs. The Cobra motor mounts bolted right into the V6 k-member. Also, the transmission crossmember is also identical. Ford made a custom bracket bracket for each transmission so the transmission mount would line up.
  16. Chythar

    New Wheel And Tires

    Found this page at LMR: https://lmr.com/products/mustang-wheel-offset-guide You can do an 18x8 in the front without mods, you may get rubbing with an 18x9 when the wheel is turned all the way on either side. The rears you can go to 18x10.5 but you may have to flip the small quad shock or...
  17. Chythar

    Idle And Vent Problems

    Well, replacing the whole hose means getting behind the dash to find the other end, so most folks tend to splice it. If you can find a rubber hose that's a similar size, I'd say go for it. Just remember that a hose that's too big won't provide enough vacuum and your HVAC system might not work...
  18. Chythar

    Idle And Vent Problems

    The vent controls in the dash require a proper vacuum to run, and this is supplied by a tiny plastic hose that runs along the firewall in the engine bay. It starts at a vacuum tree in the driver's side corner, then across the pinch weld on the firewall, then goes through the firewall on the...
  19. Chythar

    Please Help!!! 95 Mustang 3.8 Shuts Off While Driving!

    I had that happen on my 1994 V6. It was random, and my mechanic had to take the car for about a week before he could reproduce it on a test drive. Turned out to be the CCRM - the relay to the engine would pop open while driving, cutting off all electrical power to the engine. He says he...
  20. Chythar

    Expired Cervinis 1994-1998 Mustang Fiberglass Stalker Front Bumper, Painted Dark Forest Green (dfg)

    Price: $250 Location: Culver City, CA 90034 I am selling a used Cervinis Stalker Front Bumper, for a 1994-1998 Ford Mustang. It is painted Dark Forest Green (DFG), though you can paint it any color you like. The bottom lip of the bumper is scratched, and chipped in one corner, but none of the...
View older results
Top Bottom
Back
Forums
Menu