Search results

  1. beefcake

    part # for IAC spacer for 5.0's?

    have a 90 gt, looking for the iac spacer from ford with the 2 screws in it n e 1 know that part #?
  2. beefcake

    help, car won't run right after tune up

    the car feels like it's working ok when i run the rpms up, it's the idle that killing it
  3. beefcake

    help, car won't run right after tune up

    don't have any codes, i only had the code while the maf was unplugged as soon as i plugged it back in and restarted no codes
  4. beefcake

    help, car won't run right after tune up

    okay, cleaned the maf, still not running right, here is what is going on, talked to a mechanic at the dealership, he said b4 plugging back in the maf, try running the car without it, he said cycle the key 5 times and if it idles fine, then it's the maf, i did this, for about 20 seconds it...
  5. beefcake

    help, car won't run right after tune up

    whats the best way to clean the MAF? i know the plugs are all gapped at 35
  6. beefcake

    help, car won't run right after tune up

    I'm editing this thread, so read the whole think please ok, i've got an strim on my 90 gt, it was running fine, but 1 of the belts were shredded and i figured might as well change and due a tune up. now, the car is falling on it's face, this is what i did, changed serpentine and s/c...
  7. beefcake

    new pics w/ new wheels

    thx, the nitto's imo are much better than bfg's, i had a set of bfg's once for about 1 month, drove from cincy, to the nmra race in atlanta and home and they were done, i've ran 3 or 4 sets of nitto's on cars and my lightning and always got about 15k out of them, they are actually...
  8. beefcake

    new pics w/ new wheels

    not the best, but it's overcast and dark out, but had to put something up, better pics coming soon centerline warrior 15x4 up front and 15x8.5 in the back with 275/50 nitto dr's sway bar bolts are just spinning, so i couldn't get that off yet
  9. beefcake

    what kind of e.t. and mph should i run?

    2.6 too 2.7 is a horrific 60'
  10. beefcake

    what kind of e.t. and mph should i run?

    built engine, custom headers and exhaust, coil over suspension, drag rear suspension, AOD conversion w/baumennator TCS, Fel Pro Engine management, upgraded fuel system, boost a pump, vortech s trim 18psi, mild 3800 stall convertor i think that is about the low down on it :) heres a pic for...
  11. beefcake

    what kind of e.t. and mph should i run?

    the guy i bought my 90 gt from said it ran 14.0 with the 3.73 gears and gt 40 intake, not sure if thats the case or not now it has also a shift kit, and a vortech s trim, what kind of e.t. and mph should i expect, trying to decide which nitto DR to run the 275/50/15 or 275/60/15...
  12. beefcake

    which speedo gear for aod for 3.73's on 90 gt

    picked up a 90 gt yesterday, they have put 3.73's in it but never changed the speedo gear to calculate properly which gear do i need and is it a simple swap, on my c4 it was no big deal
  13. beefcake

    which way to turn distributor to pull timing on 5.0 95 gt

    i'm looking at a used 95 with about 140k on the odo, the car is pretty clean, the only thing is an engine noise when you lay on it, at highway speeds you barely have to get on it and you hear the "marbly sound" is sounds to me exactly like the 460 in my ranchero did when we first put it...
View older results
Top Bottom
Back
Forums
Menu