Search results

  1. M

    oil leak, coolant leak, acceleration hesitation

    If you are losing 3/4 quart per tank of gas that engine is pretty much ready for a rebuild. That is if you do not see any oil under the car. Also sounds like you have a blown headgasket with losing coolant and hesitation. I bet if you drain some of your oil it will be milky.
  2. M

    Air only comes out from defrost

    Seen it before. Broken vacuum line.
  3. M

    351+ Swap RI Emissions

    RI still has emissions on rollers? MA just dropped it this year...
  4. M

    Bad Intake Backfires!!!

    It is timing related obviously. First thing to do is to check to make sure your timing is advancing with the spout in. Another is to check your plug wires. Are they all correct?
  5. M

    Anybody running cobra intake with Trick Flow VC's

    Not I, but I do have the TFS Street intake. I'm assuming the geometry is similar. I had to use a 3/8" spacer. If I did not use it the bottom of the EGR (by the bolts) would hit the valve covers. I did grind it some and then I bought a spacer, (easier). You might have to do both. A 3/8"...
  6. M

    17x10.5" bullit wheels on 95 GT?

    275 on a 10.5 will look a little funny I believe. You'd want 295s or 315s. I had 275 nittos on my 17x8s
  7. M

    Major rust. What to do?

    Check this. My rust project :( Not 56k friendly - Corral Forums Sorry for linking to corral.
  8. M

    is this safe or worth it?

    A member on this board has done that. If you search it might pop up. It was a yellow car. Just out of curosity what brand/type rim was it. Also can you get the pictures. I'm just unsure of how much damage a shattered rim can cause. Never seen it before.
  9. M

    Sonic Blue SN95

    Anyone have pictures of a sonic blue sn95? I'm trying to decide what color to paint my car. I'm thinking 17" Silver Cobra R's 17x10 in back 17x9 front. Not sure what to use for front bumper or should i stay stock. Maybe just cobra bumper. Suggestions? Pictures of Sonic Blue 94-98s.
  10. M

    Fox timing pointer work on our cars?

    Junkyard? How about the mustang junkyard online? You could email them and they will get one for like $5. CJ Pony Parts - Ford Mustang Parts Email them there and they will go in the salvage yard and get you one cheap!
  11. M

    Anyone have the Summit Matrix Style Headlights?

    STREET & STRIP This car? STREET & STRIP They look like the Cobra headlights. Summit sells them for like 209.99 each side. So a total of ~$420 for the set. :jaw: The matrix set is only 169.99
  12. M

    Anyone have the Summit Matrix Style Headlights?

    Matrix 09-1089 - Matrix Diamond-Style Headlamps - summitracing.com Anyone have pictures? I am looking to buy a pair from summit with a $50 coupon from them.
  13. M

    Auto or Std

    Why would you want a STD? :rlaugh: Sorry. I would go for standard. I am too paranoid to even let my girlfriend take it anywhere outside of a parking lot.
  14. M

    anyone from MA/RI

    I live about 45 minutes north of Boston. Few stangs in this area.
  15. M

    H&R Springs

    When I select my car. 94 hardtop, the only springs that come up are H&R Super Sport Springs, 1983-93 Conv., set of 4 Will those work with my hardtop? I selected it and these are the ones that popup.
  16. M

    H&R Springs

    Where can I buy the H&R Springs (Sport). I can't find them on summit or jegs. Does anyone else know of any other reputable distributors. Also will I need C/C Plates or anything to correct my suspension/tire wear? Also how about the Ford Springs, B and C kit. Does anyone have any pictures...
  17. M

    5.4L DOHC MOD MOTOR in a Fox **PICS**

    Is that intake molded out of a plastic?
  18. M

    removing emissions equipment

    They will most likely do that for newer cars only. Massachusetts, a state that has very strict emissions, just did away with their pipe tests for cars 95 and older. It has proved too costly for them to keep going on. The machines break way too often. To original poster: Need to remove...
  19. M

    Best Way to lift engine

    Just wondering what is the best way to lift the engine. Have it almost ready to come out. Right now it is just the block and aluminum heads on it. I've lifted many by cast heads but never by aluminum. I'm afraid something could break. Any suggestions? My question is can I lift it from the two...
  20. M

    Topping off a 351 with 302 heads and other parts

    .
Top Bottom
Back
Forums
Menu