Search results

  1. mo_dingo

    how do i install gears???

    I you don't replace the carrier bearings, all you need is the "large bearing separator" that harbor freight sells for $10 to get the pinion bearing off. My first time, using a lift, I was done in 4 hours. Scott
  2. mo_dingo

    Question on o2 Sensors...

    Looks like a step in the right direction. Shocking that I was right!!!!! :) :nonono:
  3. mo_dingo

    how do i install gears???

    Here is my writeup http://forums.stangnet.com/showthread.php?t=479678 Good luck. The most important thing to tell you is to read each install article several times over. The one that Green GT posted was a big help. If there was something that confused me, I re-read that article and I...
  4. mo_dingo

    Q on installing equal length shorties

    Whatever type of bolts you use, whether they be hex head or alan, you need some good tools to get them to bolt up. A wobble extension, swivel, ratcheting wrench (stubby and long), regular wrench straight and maybe an "S" box-end wrench. I did my brothers 4.6L with all of the above and I still...
  5. mo_dingo

    Question on o2 Sensors...

    If your plug wires are original, I would replace them. Not that the ones you have are bad, but they do wear out. After you replaced the O2 sensors, did you reset the computer? You need to so the computer can relearn the new o2's. Scott
  6. mo_dingo

    Fuel Pump Etc.

    An easy way to check the fuel pump is to remove the gas cap, stick a screwdriver in the filler to open the check valve, and put your ear right next to the filler. When someone else turns the key to the acc position, the fuel pump should prime; you should hear a whirring sound. That doesn't mean...
  7. mo_dingo

    Paint Supplies

    Do you guys have FinishMaster in the east cost? That is where our body shop gets EVERYTHING!!!!!!
  8. mo_dingo

    Props to Guero

    :OT: What's up with the avatar? From Blade????
  9. mo_dingo

    Excel file REQUEST

    I just sent it from my [email protected] account. Zero Signal (John) made it! Scott
  10. mo_dingo

    gasket material ?

    Is there a spot on the deck that you can try cleaning that is away from the combustion chambers? That way you can see what is necessary on a surface that isn't vital. Taking the surface all the way to bare shiny metal is very important. Otherwise the HG is not going to mate 100% IMO. I would...
  11. mo_dingo

    ARGH... the weather is teasing us!

    Yeah me too. I love riding my bike in shorts and a t-shirt. Scott
  12. mo_dingo

    hey guys wats your favorite color

    At the body shop where I work, they use the dupont system. They used to use the sikkens system, which came out looking almost as good. You need to sand the entire car down to 400 grit. After you sand a panel, go over it inch by inch, looking for divots/impressions. Sand more if necessary. I...
  13. mo_dingo

    Anyone install a C&L 76mm TrueFlow MAF System on a basically stock '94/95?

    I hate my C&L and I am getting a Pro-M very soon. Putting a CAI on a stock car is like putting a "tornado" on any car. Scott
  14. mo_dingo

    Anyone used Plastex?

    The only plastic repair kit I have seen that works is this stuff that is a two part epoxy specifically meant for plastic. With an epoxy gun this stuff works great! You can sand/paint it in a 30 minutes!! Scott
  15. mo_dingo

    factory hood shut with tall decks and intake spacer?

    I have a 3/8" trickflow spacer and it rubs on the blanket on the hood, but still shuts. Scott
  16. mo_dingo

    anyone have pics of aftermarket hoods on their cars????

    I love the cervini's heat extractor hood. There is a thread about it a couple days ago!!!!
  17. mo_dingo

    Bullit Pedals installed and a scare today

    Hey thanks for the new word!!!!!!!
  18. mo_dingo

    strut tower bolts are stripped need to fix them how?

    One thing you can try is rethreading the threads on the strut tower. You may have enough to still bite well. Craftsman sells a good rethreading kit for $50 I think. But if you don't want to spend the money, I would just drill and re-tap to the next size. Just take your time, use a lot of oil...
  19. mo_dingo

    lawsuit happy people

    FAKE FAKE FAKE FAKE FAKE FAKE FAKE FAKE FAKE This list has been around since May 2001 and is completely made-up. Here is proof. http://www.snopes.com/legal/lawsuits.asp Remember guys, truth is what you find, not what you are told. Scott
  20. mo_dingo

    My car doesn't start, acts like a bad battery but I dont think it is.

    Not a problem. Glad it was a simple solution. Scott
View older results
Top Bottom
Back
Forums
Menu