Search results

  1. runningmole

    Brothers Performance?

    I bought my Magnaflows from Brothers. Received them 2 days later
  2. runningmole

    Last item to choose; Cam

    Another vote for Ed Curtis Custom
  3. runningmole

    H&R and Intrax ONLY please

    H&R springs here. Torque arm springs in the rear, and 750-850 lb/in (race) springs are going up front soon. The rear was lowered about .75 in. Looks good. I have a pic, but it's hard to tell. The front is still stock ride height in this pic. Got my H&Rs from www.maximummotorsports.com
  4. runningmole

    What injectors & fuel pump for 347?

    :nice: :spam: That's what I'm using
  5. runningmole

    Torque arm/panhard bar question

    Yeah it is awesome. I have the 390-430 springs in teh rear. I really like it. Just ordered some H&Rs for th efron t(750-850) should be fun
  6. runningmole

    Everyone With AFR Heads!

    Don't your Probe Pistons have valve reliefs in them? If not, Then I'm sure you'll hav eto get them fly cut
  7. runningmole

    What AFR head setup to get?

    Save up. You'll be glad you did. That's what I did and it's going to be worth it. Been a year since I started planning the motor in my sig. Have the parts now...just have to get it put together. Going to be worth it though. At first I was going to do a 347 w/ GT40 irons, E-cam, and Cobra...
  8. runningmole

    Is an RPM to much for stock

    No. You might notice a bit of tq loss at low rpm, but it's nothing that's going to make your car a turd. Plus, if it's part of your future goals, why waste money purchasing more than 1 intake. If you're worried about it, buy something else right now w/ that money that will help your car more.
  9. runningmole

    Best place to get custom cam?

    I got my custom cam from Ed Curtis. After talking w/ him and doing many searches about him, I think the 325 he charged me is a bargain.
  10. runningmole

    What AFR head setup to get?

    Last time I checked, 165s were 1325 from Ed Curtis. 325 for one of his custom cams
  11. runningmole

    xe282hr with stroker, users opinion

    I believe the mags have used that cam in some of their tests. I can't remember which mags, or even which months, LOL! Sorry. But the cam did put out good numbers...as far as magazine testing goes.
  12. runningmole

    AFR/FTI/Edelbrock combo?????

    Depends on what you want. If it's going to be a daily driver 1st, and then a track car 2nd, you can probably look forward to around 320rwhp. I did some searches here and on Corral about Eds combos and their results. They dynoed similar numbers to off the shelf packages/cams, but people...
  13. runningmole

    Anyone with an FTI cam....

    He doesn't give you the specs over the phone, or in an email. It all comes in w/ the cam. You get a card w/ all the info, characteristics of the cam, where to degree it.....
  14. runningmole

    How big of cam?

    Can't go wrong with a custom cam. Mine was 325 from Ed Curtis at www.flowtechinduction.com That's my suggestion. Good luck :nice:
  15. runningmole

    Me Again.....So weird (Idling)

    Computer should be on the passenger side kick panel. Between the firewall and the door (that little panel there on the right)
  16. runningmole

    RPM or RPMII ?????

    My cam favors exhaust. Custom from Ed Curtis, and I'm using AFR 185s.... What intake did you have listed when the cam was specced out? You should use that. If not, I think you'll do plenty fine w/ the RPM (old style)
  17. runningmole

    HARMONIC BALANCER Questions? Mine spun.

    Romac makes nice balancers. I have a 28oz
  18. runningmole

    Performer or RPM upper/lower, and what head`s???

    If I were you, I'd go w/ the Performer Intake. Unless you have plans to add a blower or really rev this thing, the RPM won't help you out. The Performer's a nice intake. As for heads, the 65cc chamber should do just fine. 70cc will really lower your compression. 24lb injectors and a...
  19. runningmole

    What is the potential of a 331 and be emission legal? Let see those combo's!!

    Greg, I'm switching from a 347 to 331. I already talked to Ed Curtis, and he said no problem on getting me a cam (I want to pass smog as well) I'm going to toss a Vortech on it too. If you go N/A, I don't see why you couldn't make at least 350rwhp w/ say 10.5 compression, AFR 185s, RPM...
  20. runningmole

    intake for a 306?

    Trick Flow intake is the cheapest (price wise) out of those listed. If money's an issue, I'd look in to that intake. Any of them will be happy on a 12sec combo.
Top Bottom
Back
Forums
Menu