Search results

  1. P

    Tremec 3650--what engines will fit?

    The T3650's in our car are rated up to about 350-365 ft-lbs depending on year of the transmission, so in no way would they be up to the task of a 600hp supercharged engine. You should be looking at the TKO600 or T56 Viper Spec.
  2. P

    4.6 to 5.4 swap

    what exactly are your goals, if you are a little more specific someone may chime in and help. Usually a 4.6 to 5.4 swap isnt normally very cost effective in terms of HP per dollar. But Bill Fisher would be the one to talk to about the 5.4, he has done alot of work researching and experimenting...
  3. P

    Supercharger Question

    its a vortech v2 and i have not called them yet, i was just trying to get an estimate
  4. P

    Supercharger Question

    How much does it cost to replace the front bearing on a centrifugal supercharger?
  5. P

    Please help me diagnose engine noise (with video)

    Well after playing around with a stethoscope, I think I have isolated the noise to the drivers side head. The reason I say this is when I put the stethoscope on the block around where the sound is loudest I dont hear anything abnormal. Then I tried the drivers side header and the noise was...
  6. P

    Please help me diagnose engine noise (with video)

    I just bought a stethoscope and will check it in a little bit and keep you guys posted, if it is in the head what would your guess be?
  7. P

    Please help me diagnose engine noise (with video)

    If it was not running on all 8 cylinders, wouldnt it be throwing a misfire code?
  8. P

    Please help me diagnose engine noise (with video)

    I recently built and installed a built PI 2v for my 96 GT Coupe and now I am having some noises that I am not exactly sure what it is, my first thought was piston slap, but i removed each spark plag wire 1 at a time and the noise did not change at all, so any help you guys can give would be...
  9. P

    Tubular K-Members

    ok cool, i guess i have another project on my hands :mad: thanks
  10. P

    Tubular K-Members

    Ok definitly messed that install up, if i take the tubular off and reinstall the factory k will it be correct again? If so at that point I could follow the MM instructions and do it right and hopefully it will be corrected.
  11. P

    Question about Instrument Panels

    I can just swap out the cluster in my current IP, but will all the wiring be the same?
  12. P

    Tubular K-Members

    I purchased a PA Racing Tubular K-Member and Tubular A-Arms with spring perches, and installed it myself, when I was finished the alignment was WAY off. I took it to an alignment shop and it was so far out of adjustment that they couldnt get the aligment completely correct. The camber is still...
  13. P

    Help me "OinkAodeOink"

    I guess I got lucky because when I started my brand new forged shortblock all I did was crank the engine over for around 2.5 minutes and then started it up, I made sure I had lots of assembly lube on the cams. But its been running ever since and no problems have appeared yet. -Andy
  14. P

    Question about Instrument Panels

    I recently purchased a complete black 1994 interior off of ebay and I was wondering if the IP out of the 94 would be able to be swapped into the 96, I know the 96 had the PATS system and the 94 didnt, but I was wondering if there was any method to make the 94 IP work in the 96 (the 94's is in...
  15. P

    Starting a new engine

    If you keep the accelerator to the floor, it automatically cuts off fuel, and the engine will just crank, the same way as pressing the fuel cutoff switch in the trunk, i dont really see a negative doing it either way
  16. P

    Starting a new engine

    So the coolant should be ok if just left in the rad and overflow, just keep an eye on the temp gauge? I dont need to try and pour coolant down the upper radiator hose or anything like that?
  17. P

    Starting a new engine

    Hi everyone, I just finished assembling my new motor and am planning on trying to start it tommorrow. Does anyone have any tips on proper procedure on how to start a engine with no fluids in it, I know to crank the engine over by keeping the accelerator floored and letting the engine crank for...
  18. P

    t45 to t3650 pics.!!!!

    I am currently working on this swap and am having difficulty with the crossmember, is there a different one that needs to be ordered or something, because I cant get the one off the T45 to work and its holding everything else up lol
  19. P

    Handheld Tuners

    I have been in the market for handheld tuners and decided that I think I will go with SCT, my question is, on their website they have the xcalibrator II and the Strategy Flash, what are the differences between the two? As far as I can tell the SF comes with tunes preloaded and the xcalibrator...
  20. P

    granatelli coil on plug connectors

    One of the mustang magazines recently had an article testing aftermarket cop setups and there are some decent gains to be had on s/c'ed cars (15hp) if my mind serves me correctly
Top Bottom
Back
Forums
Menu