Search results

  1. P

    Anyone seen this supercharger?

    oh and you dont need a tune on the mongoose kits, you get one of tim's tunes
  2. P

    Anyone seen this supercharger?

    I would avoid the frpp blower if you have a 99-04 4.6, the install kit does not come with everything that would be needed for your install, and is power capabilities are somewhat limited, for around 3000 I would go with the beforementioned mongoose kit, your get gauranteed reliablity and...
  3. P

    Anyone seen this supercharger?

    as hotmustang kind of said, thats an upgrade kit for the 03-04 cobras that come factory supercharged, it wont work on your GT
  4. P

    Exhaust Question

    I am swapping a 2001 4.6 2v into my 1996 and I purchased a used set of BBK Long Tube headers and am planning on matching it up with a VRS X-Pipe, on their website it says that there is a 1996-98 BBK Longtube X-Pipe and a 1999-04 BBK Longtube X-Pipe, am I correct in guessing that I need the...
  5. P

    Transmission Differences

    Are you sure that a newer GT drive shaft yoke is needed? I hadnt heard that one before, and comparing the two wiring harness right now in front of me, some of the connectors are definitly different (ie pins in different places etc) I know it can be done its just a matter of working out all of...
  6. P

    Transmission Differences

    alright will do, thanks for the help
  7. P

    Transmission Differences

    I was kinda hoping that fixing the speedo thing was what the extended range speed-cal did, based upon its description on the website, but i could be wrong. I know i have seen people with 3650's in their cars, so it is plausible, I just need to figure out how lol. Heres a link to the...
  8. P

    Transmission Differences

    I am trying to swap a 03 3650 into my 96 gt, does anyone know what wiring issues/differences there will be, I ordered an extended range speed-cal, will that be all that is needed to use the 3650?
  9. P

    Finished: TrueBlue03's mustang sketch ~pic~

    That looks badass, great work
  10. P

    Which mod should be next?

    I beg to differ if you add a set of stage 1 cams you are looking at adding 15-25rwhp there will be noticable sotp gains, cams are one of the best bang for the buck "boltons" if you can install them yourself. In your situation I would go ahead and order a set of vt stage 1 cams.
  11. P

    New contest

    I'm gonna guess 467hp and 483 tq hehe i hope i win...
  12. P

    Question about PI engine swap

    Hi everyone I have a few questions about the PI engine swap into a 96 GT, first what size do I need to drill and tap the aluminum crossover for the extra sensor? Also if I use the 2001 timing cover would I use the 96 alternator or the 2001 alternator? I know the brackets are different, but is...
  13. P

    Tubular K-Member Question

    Last question, is there any fabrication neccessary to use the PA K-Member with the factory a-arms? or will they bolt right in? Would the 03-04 cobra a arms be a worthwhile upgrade until I can afford the coilovers and a-arms? Also how is the camber with the factory a-arms on the k-member?
  14. P

    Tubular K-Member Question

    One last question, if you go with the tubular A-arms you need to purchase coil-overs also correct? Or is there a way to get tubular a-arms with spring perches? Once again thanks for the help.
  15. P

    Tubular K-Member Question

    Hi everyone, I have recently been looking at purchasing a tubular k-member (PA Racing) and have a few questions about them, whats the main difference between mild steel and chromoly? My car will be a street driven car that will see the 1/4 mile track every other week or so. I want something...
  16. P

    Quad Shock

    The only thing that the quad shocks are for is to control wheel hop, mainly in reverse. The mustang is succeptable to wheel hop so severe in reverse that it could snap an axle. That being said a good high quality LCA and UCA would essentially eliminate the need for the quad shocks.
  17. P

    Convertible Roof Material

    First the cobra roof is a cloth top rather then a vinyl one. That being said I don't believe there is any standard kit like there is for the vinyl tops. When I had my top switched to cloth I had it done at a quality upholstry/convertible shop. You will pay a little more for it, but I believe...
  18. P

    What is it?

    lol that is a huge sinkhole, it was on the news awhile back, they said it was something like 15 feet deep.
  19. P

    Question about engine buildup

    I am planning on using the frpp supercharger on a 2001 engine swapped into a 96gt, my question is later on down the road I plan on upping the boost to 9# (it will run 6# for the time being). I am in the process of getting a forged bottom end, my question is which piston dish would be better for...
  20. P

    Compression Ratio Question

    Anyone have any idea where to find a intercooler setup for this system?
Top Bottom
Back
Forums
Menu