Search results

  1. doobsstang

    Help please

    I dont know what it is called, it is on the back part of the tranny...has six bolts that attaches it to the rest of the tranny and the crossmember attaches to it. it is leaking where these two connect and i need to replace the seal. not sure how to get it undone and out...do i need to remove...
  2. doobsstang

    Tail housing...

    How do I remove the tail housing of my tranny? Do i have to remove the crossmember and use a jack to keep my tranny stable? I am trying to replace the seal on the tail housing...not sure if it is the tail housing, it is the last part of the tranny...has six bolts and is right before the...
  3. doobsstang

    Output shaft removal...plz help~

    Forgot to tell ya it is an AODE...stupid Auto...thanks
  4. doobsstang

    Output shaft removal...plz help~

    I had a problem with not getting O/D and i found out that my tranny sprung a leak that is coming from the output shaft...the gasket that actually holds the output shaft to the transmission, i have taken the driveshaft off and taken most of the bolts where it connects to the tranny, but it is not...
  5. doobsstang

    AODE HELP PLEASE

    I was driving today and the tranny started to act funny...I would have to push the accelerator down more and more to get the gears to change. Now it will go through 4th and then when it is supposed to go into O/D it just revs up real high like it is not in gear...When I put the O/D Off it ran...
  6. doobsstang

    New Aluminum Driveshaft Question?

    Thanks guys. I haven't posted in awhile but as usual I received great answers to my questions. I actually searched the threads first too! Hope everyone had a good Christmas and New Year. Dube.
  7. doobsstang

    New Aluminum Driveshaft Question?

    Clanking noises are coming from inside my driveshaft. I brought it to a local shop and they said I need to replace it. I am going to get the FRPP Aluminum Driveshaft. I am wondering if it is too hard to do it on my own. I think, not sure, that the new driveshaft assembly comes with new 1330...
  8. doobsstang

    Cause Of Odometer & Trip Odom Not Working.

    I had the same problem. My Speedo and Odometer/Trip would work intermittently. It was my vehicle speed sensor. I just cleaned the connections coming from the VSS from the tranny and it worked great after that. You might check the VSS.
  9. doobsstang

    haha, try this

    lol, i like that one a lot. HEHEHEHEHEHEHEHEHEHEHEHEHEHE Damn French People...
  10. doobsstang

    What Gears?

    I know there are tons and tons of threads on what gears to use but I would like to get some more details about each setup and how you like the gears you picked. I am wanting either 3:73s or 4:10s. If you guys could tell me pros and cons of these it would be great and how you like these gears...
  11. doobsstang

    nba bans bling bling

    Allen Iverson is a gangsta...He is like the bad boy of the NBA...watch him play though...he is teh $hi!. IMHO they are all overpaid...if you want to watch real basketball watch NCAA ball...thats where it is at...I would watch any college sport over a professional sport anyday...oh yeah, I hate...
  12. doobsstang

    Firefox SUCKS!

    Firefox is the SHI*&. It is not FF that is the problem it is prolly adware/spyware from all the **** you look at. :nice:
  13. doobsstang

    random post: BEST FORUM ON THE NET??!!!

    :SNSign:
  14. doobsstang

    Codes...

    Could it be injectors?
  15. doobsstang

    Something in glovebox

    Sounds like an Alarm I/O switch to me, I have a toggle switch in mine.
  16. doobsstang

    Codes...

    It runs well cold and hot...it never has problems at WOT but sometimes it has trouble at part throttle cold or hot...feels like it needs more gas and I accelerate a little bit more and it gets better...but once I get back to that certain RPM it seems like it needs more gas or something..this...
  17. doobsstang

    Codes...

    the O2 sensors are fairly new, I cleaned the MAF also. Wish I could find out the problem so I could fix it...lol
  18. doobsstang

    Codes...

    I just ran my codes again today...about a week ago I ran them and it said Bank #1 was running lean...the code I just pulled told me that Bank #2 is running lean now and says nothing about Bank #1. What could cause one side to read lean one day and then the other the next? Is that a symptom of...
  19. doobsstang

    O/R H-Pipe Install...

    Very nice...mine sounds just like that...I still get excited everytime I start the engine and hear that deep rumble...:banana:
  20. doobsstang

    O/R H-Pipe Install...

    It is fantastic...I don't know if it is just the sound but it seems to me like it just wants to get up and go now...I still have some things to fix...it is hanging a little low and I am going to try push it up closer to the frame. Had to get to work so I couldn't get it exactly the way I wanted...
Top Bottom
Back
Forums
Menu