Search results

  1. cooper58d2002

    Trans problem

    I had to reseat my H-pipe I would recommend tightening the H-pipe at the headers/manifold first then tighten the cat back side If you don't reseat it soon it will eventually burn a hole in the gasket and make a heckova racket.
  2. cooper58d2002

    got my tire plugged

    Way way back in the day (for me anyway) when I worked as a general mechanic at Firestone they made us stop plugging tires and instead installing patches due to a lawsuit filed somewhere were a women was killed by a blowout. The point I am getting at is the plug is fine if you just noticed the...
  3. cooper58d2002

    Trans problem

    T-45 clutch Install Please correct if wrong Remove h pipe, driveshaft, and shifter. Remove 3 starter bolts one is a SOB to get to it hidden up on top of the starter. You need to remove the starter as it is connected to a plate on the bell housing and will impede...
  4. cooper58d2002

    Trans problem

    Please Correct if wrong Remove h pipe, driveshaft, and shifter. Remove 3 starter bolts one is a SOB to get to and you need to remove the starter as it is connected to a plate on the bell housing and will impede your progress. There are 2 bolts way up top w/an O-2 sensor bracket attached...
  5. cooper58d2002

    safest boost stock motor can handel

    From what I have seen and heard 3.55's work the best with the KB or any root or twin screw style blower 3.73 and 4.10 max on centrifical
  6. cooper58d2002

    xcal ?

    Correct if I'm wrong but I beleive the only reason they had speed limiters was the lack of Z-rated tires due to Federal mandations.:flag:
  7. cooper58d2002

    xcal ?

    I don't know if I'm oversteping my bounds but I thought that the GT's don't have a speed limiter I have at least yet to find mine if it does.
  8. cooper58d2002

    cobra crank in 2v block?

  9. cooper58d2002

    cobra crank in 2v block?

    Thanks all I think I am going to save my Pogs for a few and pony up for a built shortblock. I think I should be safe running a turbo at 8 PSI around town and 12 at the strip until I have enough change to swing one. Was thinking about building myself, but after listening to the board I think I...
  10. cooper58d2002

    cobra crank in 2v block?

    I thought that was the case I guess I just had to hear it. I wonder what the deal with the 8 bolt crank vs the regular 6 bolt crank?
  11. cooper58d2002

    cobra crank in 2v block?

    A few months ago I switched my flywheel and clutch out and had to return the 6 bolt flywheel to get an 8 bolt cobra flywheel the guy at the shop said that my particular block used the cobra crank. I didn't think anything of it at the time just wanted to get my clutch done. Does the romeo blocks...
  12. cooper58d2002

    Dowels on flywheel

    I had to order the new dowells from ford today $3 bucks a peice. I think this thread is a reminder to everyone out there that no matter how many times you do something you should not rush anything or stop and wait between weekends to finish up a project because simple things like a 3 dollar...
  13. cooper58d2002

    Dowels on flywheel

    only when i rev it in nuetral and at certain rpms in nuetral but its not a terrible vibration while driving its fine other than the chatter when i first start off its a pretty bad chatter
  14. cooper58d2002

    Dowels on flywheel

    True but without the dowells on the flywheel the presure plate only has the bolts to line everything up so my pressure plate may be a millimeter off :shrug: this suck I knew i shouldnt have rushed:bang:
  15. cooper58d2002

    Dowels on flywheel

    The clutch was fine other than the ever annoying thowout bearing noise I wanted to replace the clucth before i threw in the Supercharger at a later date
  16. cooper58d2002

    Dowels on flywheel

  17. cooper58d2002

    Dowels on flywheel

    I have the dial indicater but where can i pick up the bracket that is in the pic to check the runout
  18. cooper58d2002

    Dowels on flywheel

    gotcha :o gonna pull the tranny this weekend thanks for the help
  19. cooper58d2002

    Dowels on flywheel

    do ya'll think it would hurt anything to let the clutch break in and see if the chatter will go away or should i pull the tranny and stick some dowells in the flywheel
  20. cooper58d2002

    Dowels on flywheel

    Well put the new spec stage II clutch in with a ram bullit flywheel problem is a have a pretty bad chatter unless i just let the clutch off fast and give it more gas than usual. Like a retard :shrug: :bang: I didnt install any dowells on the new flywheel My question is would that make a...
Top Bottom
Back
Forums
Menu