Search results

  1. 88STANGCONVERT

    autometer fuel pres. gauge

    I just put an Autometer Feul Pressure gauge and a reg. on my car and I can tell you that the fitting that goes into the back of the gauge is not one I could find at the local parts store. So what I did was find the nearest hydralic (sp?) place and went to the them with it and they got me what I...
  2. 88STANGCONVERT

    How do i get my vert top white again

    I actually have used just Comex and a stiff bristled brush. Then afterwards you really need to get some kind of vert top protectant, The UV rays, dirt, grime ect on it or hitting when you are driving will affect it. What about a new top? Expensive but sounds like it may be getting time. Good...
  3. 88STANGCONVERT

    Best Fuel Pressure Regulator

    I have the BBK. Now I know that alot of people do not care for the BBK stuff but I really have had no problems with it to date. It does have the port as you have seen WarmDye for the gauge, but I may consider the Auro. one if they have no problems. Let me know when you are going to do this.
  4. 88STANGCONVERT

    Racing Seats

    I know what you mean by the seats being real high. I am not a tiny Tim so I needed them lower (I have the Corbeau gt-7's). I took the Corbeau brackets and modified them so that they basically sit flat. I took the front "L" on the brackets and mad them flat then reduced the back ones by at least...
  5. 88STANGCONVERT

    Is MSD worth it?? What kinda Power gains?

    I just installed the MSD Blaster coil, MSD billet Dist. and the MSD Digital 6-Plus box and I will say this you can tell a difference. My motor is basically has basically stock heads, block, internals ect. I am not sure what kind of HP gain it is but I really can tell a difference. You feel the...
  6. 88STANGCONVERT

    plugs for smog pump delete

    Just a note, not all of them are threaded. In fact I think if you look there is no reason for them to be threaded really. I went to a machine shop and asked them what they do, and he said it depends if they are threaded or not. Well mine were not so he game me the press in plugs, (very small...
  7. 88STANGCONVERT

    Locking Hood Pins

    By all means use the factory stuff with the pins. This is about the only way I would say go for it.
  8. 88STANGCONVERT

    Locking Hood Pins

    PLEASE, read this first. I had them on my car. I put them on with the new hood I had, catch that, HAD. They suck more than I can tell you. Sometimes they do not luck completly and if you forget for some bad reason to lock them well you know what can happen. Mine were locked and well we thought...
  9. 88STANGCONVERT

    Which subframes to get?

    I second the Maximum Motorsports setup. I have them and other items and I really like the quality and fit. Good Luck! :nice:
  10. 88STANGCONVERT

    Anyone with an MSD Dig 6-plus box, Help!

    Well I did put one in, I had the large fuse holder and put in a 25amp. I do not like the idea of a hot wire going straight to it without some protection. What happens if the line shorts out, what will happen to the box? Will it be able to handle the possible spikes? I do not know about all of...
  11. 88STANGCONVERT

    Ignition Tumbler jammed, need help

    Thanks Hissin50, I appreciate it. I just can not believe it. If that is all that goes wrong with all that I did then things are good. Again, Thanks! :nice:
  12. 88STANGCONVERT

    Ignition Tumbler jammed, need help

    Well I got the car running after putting in alot of new parts and it ran great, but then (just my luck) the ignition tumbler got jammed. I really do not know how to explain it but it appears that some of the pins in the tumbler have become free and now I can not get the key in the ignition. Well...
  13. 88STANGCONVERT

    Too Much Bass??

    Dynomax, yes that is what I meant, put in a really loud exhaust so you will not hear the rattle. :rlaugh: Dynomax, what crack was I on?, Sorry everyone, yes I mean Dynomat, what a dumbarse I was! :rolleyes: I look really stupid now, I think I will leave before I make it worse. Good luck!
  14. 88STANGCONVERT

    Anyone with a Fuel pressure gauge mounted outside, what about rain?

    Mustang5l5, That is a great way to mount it! Good job, I never thought about doing it that way, nice work. :nice:
  15. 88STANGCONVERT

    Anyone with an MSD Dig 6-plus box, Help!

    bump
  16. 88STANGCONVERT

    Anyone with a Fuel pressure gauge mounted outside, what about rain?

    I would like to thank all of you! I was wondering if I would have a problem and obviously not. Appreciate all the responses, it is funny how I can email Autometer and get my answer alot faster here. :D
  17. 88STANGCONVERT

    Anyone with a Fuel pressure gauge mounted outside, what about rain?

    I have mounted my fuel pressure gauge outside the car and I was wondering about it being sealed up in case it rains. What have you done for this? I really appreciate any help with this one! :nice:
  18. 88STANGCONVERT

    Anyone with an MSD Dig 6-plus box, Help!

    I am in the middle of putting in my Dig 6-plus box and the main power wire that goes to the battery I want to fuse but it did not come with one. HAs anyone fused this wire and if so what size of fuse did you use? Thanks for any help with this. :nice:
  19. 88STANGCONVERT

    smog pump delete

    This is fairly easy to do and as others have said there are several ways to do it. I tried the Ford therm. plugs which go in the back of the head, but mine are not threaded and the plugs did not work, plus the room you have to work there is min. to none. So what i did was take a piece of alum...
  20. 88STANGCONVERT

    Bypass A/c?

    There has been alot of questions on this topic. If you have not tried yet to do a search on this topic you might try that to get alot of idea's. Personally I used the Ford AC delete kit. I have a Vert and I did not want the AC on the car so I got rid of it with the delete kit. This kit is very...
Top Bottom
Back
Forums
Menu