Search results

  1. gerzen

    valve cover leak GT-91 stang

    hi recently i swap mi heads and intake to my stang, i put an a GT-40P heads and a explorer upper and lower intake, also i use a bran new gaskets for all the swap also i change the valve covers gasketes, but las week i theardown the tranny for make some modifications, and i replace the rear main...
  2. gerzen

    96Code

    ok, thats why in sometimes i feel the car more solower than other, ok Jrichker, thanks a lot for all your help with the info that you give me i dont going to have problems to find out the location of the trouble thanks a lot again :nice:
  3. gerzen

    AOD trouble

    hey time only, that´s a good theory, i hope it could be, so im going to remove the tranny pan and se what i found, also install a good cooler and see what happend thanks a lot for all your responses fellas
  4. gerzen

    AOD trouble

    yeah, maybe is to late :bang:
  5. gerzen

    AOD trouble

    so if the trouble is the temp can a trans fluid cooler help? the oil smell and see ok, also the fluid level is ok
  6. gerzen

    96Code

    Wowl great info men, thanks a lot im going to do the all procedure this weekend and find out what the problem is, hey another question, that intermiten problem in the secondary cyrcuit can make a leak of power? i said that because recently i fell the car a little more slower, whit a little less...
  7. gerzen

    96Code

    hi fellas, i have a problem, i ran my KOEO and KOER a few months a go and i get the 96 code, i reset the ecu and the code don´t appears again then one week later i ran again the test and the 96 code appears again, i clean the codes ran again the test and the 96 dont show up, so i ran again the...
  8. gerzen

    AOD trouble

    hi last weekend i go to the 1/4 mille track and ran my 91 AOD Gt convertible, so i make a lot of pass, and at the end of the day y drove the car to my house and when i was near to my house the tranny comes to have a failiure, when i stop te car and when i try to star moving the tranny comes to...
  9. gerzen

    torque converter which one? how it works?

    Ok thats a god tip, is better have an specific converter for an specific combo rigth? but abou the RPM range is a good choice 2600 rpm? or maybe 2200?
  10. gerzen

    torque converter which one? how it works?

    ok thanks a lot all of you :nice: so i definitive the best choice is a 2600rpm stall TC, rigth?
  11. gerzen

    torque converter which one? how it works?

    Wow that was an amazing explain about how the converter works, actually ive been thinking in buy a B&M converter thansk for your advice, now im stay away from that brand and get a better converter, im goign to make a call at Lentech Automotive for get a good converter, i think a 2600 stall is a...
  12. gerzen

    torque converter which one? how it works?

    hi i have a 91 5.0 AOD stang i have the H/I swap 65 mm TB 70 mm MAF, and a 3.73 gears, so the next step is to install a good torque converter for get a better launch, so here is where i need your help, how the torque converter works? i mean i know is like a have to fan in front each other and if...
  13. gerzen

    Pop starting

    the risck about the broken lifter is that the lobe of the cam maybe was damage, i think that is very strange that your situation is the result of try to star the engine like teh way that you did, i think maybe the engine was off in fisrt place, when you was waiting to do the left turn, because...
  14. gerzen

    Pop starting

    well the fisrt thing to do is remove both valve covers, and look for a losing roker arm, ones i have the same noise in my 5.0 roller engine that time the little "spaider" that hold down the "H" conectors of the roller lifter was broken and one of my roller lifter was rotate and that make a lot...
  15. gerzen

    can a bad Hego sensor make a lose in performance?

    can a faulty Hego make a lose in performance? im asking because i have a 91 code in my KOEO and KOER and i check both Hego and one have a 4.3 ohms at room temp what it means that the Hego have a failure, im going to replace it any way but i just courius if that Hego is make me losing performance...
  16. gerzen

    Vacuum problems

    thats a great view :nice: 4G-KDMP
  17. gerzen

    Vacuum problems

    i hope this can help you the TAB and the TAD are locate it rear at shock tower in the passenger side,yhe CPRV is closed to the smog pump behind the alternator, the PCV is locate it in the lower inate in the rear part, where the engine meet the firewall,
  18. gerzen

    Intermittent fuel pressure

    just whit the Key off remove your gauge and that its going to let the air out off course be carefull about the gas put some towel in the line before you remove the gauge.
  19. gerzen

    Intermittent fuel pressure

    did you try to adjust with the vacum off? maybe can be an air in the line i suggest purge the fuel line push for a few seconds the schrader valve just to leave the air of the line
  20. gerzen

    MGW shifter question

    it has and adjusting stick? becasue some have a two position, you can bolted in two diferents heigth, the shorter position more shorter shifts you will have
Top Bottom
Back
Forums
Menu