Search results

  1. ocbaud

    Need help with Demolet tunable induction install

    owned? hahaha, i got a good deal on my demolet intake, but from what i've seen they both look pretty good. i for one dont give a crap about the marketing strategy, all i know is that my demolet is worlds better than the mac cai i had before :)
  2. ocbaud

    I noticed something about using different fuels, do you notice the same?

    i usually run 89 in mine because with 87 i get detonation under wot :(
  3. ocbaud

    fenderwell emissions pump

    so my 2001 should have it?
  4. ocbaud

    fenderwell emissions pump

    does every mustang come with the little emissions electric pump in the passanger fenderwell? the reason i'm asking is i recently sold my mac cai and replaced it with a demolet intake. the guy who bought the mac was asking about a bracket to relocate the pump towards the front of the car so...
  5. ocbaud

    How to tell....?!?

    its kinda hard to explain if you've never experienced it before. say you're getting on the gas hard and you hear something that sounds like rocks in a tin can coming from the engine. thats pinging or the technical term is called detonation http://www.misterfixit.com/deton.htm
  6. ocbaud

    How to tell....?!?

    ok :) a ford tech might be able to scan something to tell you about what your timing is set at, and then you'll be able to find out by posting that info. the only other way would be try regular and if it pings than try the next up until it stops :)
  7. ocbaud

    How to tell....?!?

    how do you know it doesnt have a rev limiter if you've never redlined it? i've hit the rev limiter in my car once at the track, and i believe it was set at just above 6000rpms
  8. ocbaud

    How to tell....?!?

    what do you mean it didnt have a rev limiter to it? how high did you rev it up to?
  9. ocbaud

    these brakes worth it?

    friend has a set of cobra calipers off a 96 cobra with the 38mm pistions. i can get them cheap and was wondering if it would be a good deal or if i should just wait to buy a set of used newer ones with the 40mm pistions or a brand new set? the big question is, is there a big difference in the...
  10. ocbaud

    Pinion shaft lock bolt SNAPPED!

    good job man!! haha i did this EXACT same thing to my '86 chevy truck 2 years ago. snapped the pinion shaft bolt in half, which caused damage to the pinion shaft and carrier. so i upgraded to an eaton posi and 3.73 gears from the stock open diff and 2.73's
  11. ocbaud

    K&N FIPK compared to other CAI's

    i swapped out my mac cai for a demolet one today. installed it in about 45 minutes, not hard at all to line up. if you are choosing just based on install difficulty, dont.
  12. ocbaud

    engien misfiring badly, need help

    the #5 cop was going bad. i'm glad that that problem is now over :)
  13. ocbaud

    engien misfiring badly, need help

    havent done that yet. will probably when i get home tonight. can water get down past the plug boot and actually mess with the plug?
  14. ocbaud

    engien misfiring badly, need help

    about 2 weeks ago i washed my engine. right afterwards the engine was running really rough. i've given it some time to fix itsself and it would misfire and run rough randomly, and other times it would run fine. well today it was running really rough and the SES light came on and i took it to...
  15. ocbaud

    Using GM Syncromesh in a TR3650

    i just swapped out my triax shifter today with an mgw, while doing that i drained my fluid and added 3.2 quarts of royal purple max atf and it seems to shift a little better:)
  16. ocbaud

    difference between cold air and short ram

    hey! i have that intake. i dont know what exactly the problems are with the mac that make people hate it so much on here and other boards, but i'm sure most people will say that cutting it up like wont hurt anything with it :) doesnt look to bad actually. i've got a tuneable induction intake...
  17. ocbaud

    Tranny Problem or Not?

    i've tried a pro 5.0 , a triax, and a mgw. i've had an mgw on my old v6, and a triax on my gt up until today, when i swapped for a mgw. from what i felt driving all 3 shifters, the triax and mgw felt a lot more alike than the pro 5.0. it was a very short shifter, but i didnt like the angle of...
  18. ocbaud

    Tranny Problem or Not?

    my first time at the track with my gt(and any manual car) on a couple of my runs i had trouble getting the shifter into both 2nd and 3rd under hard throttle. other times it was fine. that was with the triax. tommorow i'm installing an mgw shifter, which i had on my v6 before and it is SO much...
  19. ocbaud

    special service message 15747

    yeah, its momentary. just does it usually within the first 2 minutes of driving at very low speeds(coming to a stop) this is my first car with abs, so maybe i'm just not used to it.
  20. ocbaud

    special service message 15747

    so when it makes the testing sound, its normal for the brake pedal to push back while pressing it?
View older results
Top Bottom
Back
Forums
Menu