Search results

  1. LMan

    Fuel Line.............

    Who stole your line, and did you report it to the police?
  2. LMan

    Master cylinder pushrod questions..

    Take a stock pushrod, cut in half, thread both ends with a T&D kit, and use a small turnbuckle/jam nuts.
  3. LMan

    68 Needs Repair Any Advise?

    Holy crow.
  4. LMan

    What brakes?

    I tracked my 67 FB all last season with PBRs and they worked well. Perfect? No, since its on the stock size rotor. But then I might have 125.00 in the entire setup. If you want more then the next step would be the MS and Ultrastang kits to mount the 13" Cobra front calipers on the...
  5. LMan

    351 heads on a 302

    http://forums.stangnet.com/search.php?searchid=1369451
  6. LMan

    DRUMS TO DISC...

    ..plus the symbolism of a big, gaping hole in the middle? :D
  7. LMan

    What brakes?

    why not the PBRs-to-vintage-spindle option? This forum has been alive with discussions about several avenues for at least a year....Mustangsteve, Ultrastang, Woodys Fairlane site link, etc You also dont say what you budget is, or what sort of opentrack. That's, umm....kinda critical to know.
  8. LMan

    Master cylinder-what this hole?

    http://www.sn95brakes.com/mc.php
  9. LMan

    Fuel Line.............

    anuther trick is 2 put comprezed air in the feulline n c if theres a bluckage there also
  10. LMan

    Disc brake swap problem

    PBR fronts + the Ultrastang rear disc option is what you need :nice:
  11. LMan

    Bearing retainer bolts for T-5

    Check these vendors: Modern Driveline Hanlon Motorsports Rosehill Performance Parts (Glenn Buzek)
  12. LMan

    '67 with Edelbrock carb

    http://www.edelbrock.com/automotive_new/mc/carbs_acc/carbs_access_main.shtml
  13. LMan

    Home Alignment

    buy yerself a caster/camber gauge and go to it! "It's your duty, Judy!"
  14. LMan

    Pics of Taurus Fan on 20" radiator.

    Damn, if only those pics were larger...... :p
  15. LMan

    How big are stock 302 valves?

    What you really mean is a set of 351C heads on a Windsor block (Clevor). This is a set, well-known procedure but with the profusion of good, aftermarket Al W heads its out of favor. To do it you have to drill some water passages to match the heads and block. The FRPP catalog used to have a...
  16. LMan

    Spring problems...

    Tim's got you covered :nice:
  17. LMan

    Will Foxbody gas tank fit in a 67?

    bad idea. Better idea is to modify stock tank for EFI use.
  18. LMan

    oil pan for 351w in 68 mustang

    front sump pan.
  19. LMan

    67 and 92 bolt pattern

    Rusty is right. 92GT rear = 4 lugs 67 V8 Mustang = 5 lugs
  20. LMan

    toploader linkage

    call this guy Mark at www.toploaderheaven.com super guy, Mark will help you out :)
Top Bottom
Back
Forums
Menu