Search results

  1. G

    Mach 460?

    My 2001 Mustang and 2002 Explorer have the same head unit. I've had the Explorer head changed out under warranty. The same prohibition concerning adhesive labels applies to the replacement unit. I use a fingernail file to free jammed discs. Basically all you have to do is put a bit of...
  2. G

    Disappearing Odometer

    Sounds like a loose electrical connection. Perhaps the connectors on the cluster are getting some corrosion. See if they're cleanable (most likely they are). I took my '98 out to check for a rattle and it wasn't hard to do. I can't remember the method of connection. My memory for this kind...
  3. G

    Need exhaust design help

    I used long tubes on my lowered '65 fb without problems. Suspension was stiff which helped. Emergency brake cable clearance is one thing to consider when installing the mufflers. I used Dynomax but I'm sure there are other performance mufflers that are equally good. Mufflers can be...
  4. G

    New engine will not idle - HELP?!?

    Fellow Mustanger ('66 vert) had his engine rebuilt by reputable firm. Had similar problems as you describe. After a string of trouble he got down to checking everything. Found he had 351w cam installed. When he changed the firing order to 351w, the problems disappeared. Its worth checking.
  5. G

    Fan Shroud frustrations!!!!!!!!!

    When restoring my '65 I ran into similar problems. I bought a shroud, fitted it and had blade/shroud conflicts...must be damn reproduction shroud...got OEM shroud...no joy. :bang: I finally checked the stampings on the fan to learn it was a '67 (five-blade assymetric flex fan). I had...
  6. G

    V6 to a V8

    Its been done before. The general approach is to shave off the shock towers and install a Mustang II front axle and suspension. This allows the sides of the engine compartment to be wide enough to accommodate the DOHC engine. There are several articles on the web as to how this is done...
  7. G

    SIDE BADGES...

    Some of the early badging is available in adhesive backed. Might check with your classic Mustang parts vendors before trying to cut out adhesive backed tape by hand. I can't say for sure but check with National Parts Depot or one of the others.
  8. G

    Bullitt Wanted - Replacement Bullitt Wheel

    Need one Bullitt wheel, 17x9 (I think, perhaps 17x8). Wheel must be like new (no flawed wheels). Perhaps you have a good salvage wheel. I know I can get one from Ford Racing but I'd like to save some bucks if possible. Post picture, part number, price and terms.
  9. G

    Need help finding technical information on a 01 GT ECU

    With rear end gear changes 2/3 of the cost is parts and 1/3 is the cost of labor at a professional shop. A pro shop has all the right tools and the skills to do the job quickly and efficiently. In my opinion, its just not worth the hassle of changing gears yourself. If you do decide to do it...
  10. G

    stock headlights are too dim, any replacements?

    I'm familiar with the dim lights...my '98 weren't exactly brilliant. I hate to say this but my '03 Honda Accord has wonderful lighting in comparison. I now have '01 GT (hobby car) but its never been out at night (no :bs: ). I figure it should be at least 7 years old before I can let it out...
  11. G

    How do you work the VOLTAGE METER? Going to install plenum/tb tomorrow.. *PIC*

    a. The black test lead (wire) goes in the COM socket. b. The red test lead goes in the V-Q-M socket. Note: "Q" is as close to "Omega" as I can get on a computer keyboard. c. Put the scale to 20 V DC as said previously d. Put the end of the black test lead on ground (any point on the car...
  12. G

    Cleaning headlights?

    There's a plastic cleaning kit on the market that comes with everything needed to make hazy plastic lenses look good once again. You get polish, polishing attachment for drill motor and several levels of sandpaper, emory wheel plus a buffer pad to renew these. The effort is moderate and the...
  13. G

    Tested out the whole mpg thing

    City mileage can't be determined in one tank of driving. It has to be a long term average mileage. There are too many driving factors that influence city mileage: how much time did you spend in traffic, at stop lights, etc. If there are twenty traffic lights on your way to work, you'll not...
  14. G

    03 Motor swap what'll it take

    FRPP's 4.6L engine assembly is a pretty good deal for $5,995 (also one other for $5,795. http://www.fordracingparts.com/parts/part_details.asp?PartKeyField=6688
  15. G

    ChromaLusion®

    I was coming back to work following a lunch break and I'm following this late model GT 'vert thats painted with ChromaLusion paint. Looked dark blue metallic shading into green. See http://ca.dupont.com/NASApp/dupontglobal/ca/products/prodDetail.jsp?nodeID=5468 This paint is similar to the...
  16. G

    Bullitt lowering Springs?

    The easiest way to get FRPP kits is to simply buy them across the counter at Ford Dealers authorized to sell Ford Racing products (there's always one in every locale and if the one nearest you doesn't then they can tell you where the nearest one is). You can also call Ford Racing for a list of...
  17. G

    Lost Lug Nut Key

    McGard Locks Looks like a McGard lock to me. Call these guys and send picture of the lug nut. They should be able to match key nut with picture. http://www.mcgard.com/custserv/ Also I believe SnapOn Tools makes a rubber lined conical socket that can be used with a air impact wrench to...
  18. G

    Need Help! 96 cobra ticking noise at startup

    Cobras have forged pistons. Although the properties of forged pistons are strength and durability, the downside is they have poor thermal characteristics. They expand quite a bit on heating. This means machine work (bore) must be bigger than for cast or hyperutectic piston types. Here's...
  19. G

    New to mustangs need help

    Of the current generation Mustangs there are three basic cars: V6 pushrod, V8 SOHC, V8 DOHC. For 2005 there will be a V6 SOHC. These engine types align with standard body Mustang, deluxe Mustang (GT), and performance Mustang (Cobra). Aftermarket, with Ford blessing, also makes Steeda Mustang...
  20. G

    Weird clutch Grip point?????

    All things being adjusted the same, a thinner clutch disc results in engagement at progressively higher pedal positions. Thick new disc should engage lower if no linkage adjustment is made. As wear occurs, the engagement point should be higher and higher until the disc is worn out. Automatic...
Top Bottom
Back
Forums
Menu