Search results

  1. Z

    Need Help with wiring in high torque starter

    got a power master starter but it has two connections on it, Which one do i Use, there is a small conection where the starter wire fits on and there is a larger one , Someone please give me some advice
  2. Z

    Ticking noise.

    put the scope on the oil pan and listen to hear if you have a bearing going out , and Fram actually makes a good oil Filter ,
  3. Z

    Ticking noise.

    how many miles is on the engine?
  4. Z

    Loud Rocker Arms

    its normal to have valvetrain noise with aftermarket cams, also you might consider longer push rods
  5. Z

    I need the cam card for the E303 cam ASAP

    e-cam has 220/220 duration 498/498 lift, and has a dot to line up with
  6. Z

    AOD won't come out

    if you pulled on the left side of the tranny case and have someone pull on the right side of the case at the same time and jerk hard it will seperate,.
  7. Z

    why is my motor shaking?

    check your TPS
  8. Z

    Installing Rockers - Zero Lash Question

    are you adjusting the intake and exhaust rockers 1 at time? and you should use tread lock and tighten between a 1/2 turn to 1 full turn. especally if you use AFR's.
  9. Z

    Installing Rockers - Zero Lash Question

    If you got pedestal rockers arms you should tighten them to specs. your doing what it calls for stud mount rockers arms
  10. Z

    What would do (broken Axle)

    im buying a 89 gt with a snapped axle. I have a another stock Rear end with 3:73 in it just laying around in the garage, the broke one has 4:10 in it, Should I just swap out rear's or just buy New Hardened axles with 28 splines, this is the second axle the car has broke. how do the hardened...
  11. Z

    looking for a write up for doing drum brakes

    Thanks for the help, its funny I can basically do anything on cars, but I have had 0 experaince with drum brakes.
  12. Z

    looking for a write up for doing drum brakes

    any info would help, thanks
  13. Z

    Upper/Lowee Intake Install Help

    It's Real basic. just go slow and becareful with the removal of the injecters, and clean the surfaces real good for the new gaskets, and play close attention how the vacum lines run you can PM if you run into trouble, and put the car at TDC for the distributor removal makes it easier.
  14. Z

    can someone please check a car on carfax Please.

    can someone please check a car on carfax for me 1FABP42E1KF191003 is the Vin # its a 89 GT, thank you
  15. Z

    having problems with T-5

    where is everyone?
  16. Z

    having problems with T-5

    TTT
  17. Z

    Has anyone ever been tempted? be honest....

    I Got Both 94 COBRA and 2002 Camaro SS, NO comparison with Power SS owns it.
  18. Z

    having problems with T-5

    Having Problem With My Tranny. Help it has a grind rattle sound after I put it in first gear and drive it only lasts for a second but in second gear it whines but in third gear it whines really loud like i have a blower on the car, Whats the Deal? Help.
  19. Z

    anyone ever changed head gaskets on a 93 taurus?

    thinks I will raise the engine , anything I need to no before I raise that side(like any tips) thanks for your response.
  20. Z

    Have a major problem with my 94 GT(please read)

    it all started jerking and stalling yesterday so i put gas treatment in it and it did nothing but overheated and started steaming like crazy and died, I only owned this vehicle for 2 month's now, so I just thought it would be head gaskets. I got everything ripped apart, but some cylinder walls...
Top Bottom
Back
Forums
Menu