Search results

  1. Dave0803

    Idle problem

    I also have a problem sort of like this. Mine seems to drop when the cooling fan comes on though. I have replaced the IAC. I have a heard a lot of people saying the dealer has replaced alternators for this issue. What should we be looking for in the TPS voltage and fuel trims? I have a tuner but...
  2. Dave0803

    Hot Start problem with an 02 GT

    my 03' GT also has this same problem. I have looked up many posts and changed my IAC like a lot of other people say and nothing helped.
  3. Dave0803

    manual fan switch

    anybody ever have problems with this mod? My 2003 GT has a two speed fan motor. I was woundering what would happen if I wired up a switch to say the high speed fan and while I had it on the computer put on the low speed fan? Will the fan motor be okay if both speeds were set on at the same time?
  4. Dave0803

    idle problem

    no, I always have everything off.
  5. Dave0803

    idle problem

    I tried that A while back and any time I put a new part in I do it as well and it hasn't worked.
  6. Dave0803

    idle problem

    It seems like any time the cooling fans come on or the A/C kicks in, the car drops down to about 500 RPM's and then slowly comes back up. I've replaced the IAC and that didn't help. Any other car I've had the idle has raised when the A/C came on and I don't remember this one droping until now...
  7. Dave0803

    dimming Lights

    it does deliver 13.5-14 volts. It just seems to drop/fluctuate a lot whenever any power accessory is used like the a/c, power windows and when I use the barkes the lights all fliker. I also noticed that when the a/c comes on, the idles drops to about 500 rpm for a second. I don't know if all...
  8. Dave0803

    dimming Lights

    I have an 03 GT and my voltage seems to fluctuate a lot. sometimes I have even seen it drop to almost 12 Volts when a lot of power is drawn (when A/C compressor kicks in, both windows going up or down, etc.). What I wondered about the most though is when I press the brakes I can see my lights...
  9. Dave0803

    Shock Question (Top Nut, Front Struts)

    how is the noise on the MM camber plates? I tried the UPR ones and they sounded like my whole suspension was loose evey time I went over a bump and then I went to the MAC plate cause they have the urethane bushing.
  10. Dave0803

    black specs on rear

    Yeah, I thought the same thing...I'm going to have to live with it. It's not tire goo and it is pretty much what what the other yellow stang had in the pic. It's all around the plate and the back trunk & bumper. I've tried clay, rubbing/polishing compound, wax, and finger nail scraping. they...
  11. Dave0803

    black specs on rear

    They don't show up in pics very well. I looks like the it has been peppered. I've tried scratching them off too and you can feel that they are on top of the paint but they won't come off.
  12. Dave0803

    black specs on rear

    anyone know what to use to clean the black specs off the back of the car. I have an o/r x-pipe and I think that all the carben might be blowing out all over the car. I tried a clay bar, rubbing & polishing compound and nothing is working. Has anyone else had this problem?
  13. Dave0803

    unstable suspension

    Since the last post I have taken the suspension back to stock till I can get the parts I want but the car actually feels worse now than it did before. Eevn just changing lanes because of the crown in the road causes the steering to become irratic. Going even over the slightest imperfection in...
  14. Dave0803

    Bleeder Screw

    I have a 2003 GT. Does anyone know a part number or what bleeder screw I need for the front? A guy at napa gave me a set he said would fit but the threads where different and I don't know what the threads are on the stock screw so I can get another one. -Dave
  15. Dave0803

    Rpms fluctuate when im idling and i turn the air on

    yeah, mine drops when the cooling fans come on, power windows, and anything else that uses voltage. Mine has had a bad idle since the day I got it though. Do any of these things run smooth?
  16. Dave0803

    rear brake install problems

    do you still have the old calipers? Most likely they weren't bad in the first place. You need a special tool because the pistins need to be turned and pushed in at the same time. The c-clamp won't work back there. As far as the pedal feel...did you check and bleep all the brakes? Are sure your...
  17. Dave0803

    unstable suspension

    I have a 2003 GT with max speed springs-2" drop (yes I know they are crap), bumpsteer kit, and BBK C/C plates. Other that what I have listed, everything else on the chassis is stock. My problem is when I am driving on anything other than a flat smooth road the car wants to wander in every...
  18. Dave0803

    mach 460 speakers

    does anyone know of anywhere that sells speakers to replace the stock ones in the mach 460 system? I know that none of the one in the stores as far as I know will work, but sony makes the system and not some off the wall company so I would think that someone would make some.
  19. Dave0803

    Wiring pinout for 98 Mustang defrost switch

    If you want the factery service books, wireing diagrams, and so on...go to helminc.com. you can buy them all there. they will have anything you would ever want to know in them.
  20. Dave0803

    tire chatter

    I have an 03 GT. When I back the car up while turning in the morning and the tires are still cold. the tire chatter/shutter. They don't seem to do it one it has been driven for a while. The alignment has been checked and that is fine and I don't see any other reason for this. Is this just a...
Top Bottom
Back
Forums
Menu