Search results

  1. A

    Please predict my MPG......deciding on 5.0 or Civic as daily driver-help

    If you are serious about hooking up your mustang, a true daily driver car will be one of your best mods. It allows you to take your time and fix things right instead of forcing you to be outside in the dead of night trying to rig stuff so you can get to work/school the next day. If you can...
  2. A

    Don't Know What to DO Please help!!!!!

    Sounds like you have a serious problem here. I wish I had your problem!
  3. A

    junkyard shortblock rebuild

    Sounds like a good plan to me Nick. If I had to do it all over again, I'd probably just re-use my stock block with new rings and bearings and then use that extra money for a s/c or turbo kit in place of the nitrous. Good luck! BTW, I have an extra Taurus fan lying around if you wants it. If...
  4. A

    Can you be running rich but not have enough fuel volume?

    That's what I thought. I had just read a post that said that the stock fuel pump wasn't capable of feeding 30lb injectors, not to mention a pretty well-respected engine builder looked at my dyno graph (which shows I'm running rich) and came up with the conclusion that I may have enough pressure...
  5. A

    Can you be running rich but not have enough fuel volume?

    Trying to diagnose my high rpm dropoff. With the new engine, I upgraded to 30lb injectors, but have yet to install my new 255 fuel pump. A pretty knowledgeable builder suggested to me that a lack of fuel volume could be responsible. Thus my question, is it possible to show a rich a/f ratio but...
  6. A

    CANNOT GET THE BRAKE LINES OFF!

    Vice grips are your friend!
  7. A

    poneypower89 wash your hands and eat your vegies

    Man, clear out your PM's so I can finally PM you poneypower
  8. A

    331 dino still very dissapointing, experts help needed

    I'm hoping, looks like the intake will have to get ported or replaced.
  9. A

    331 dino still very dissapointing, experts help needed

    Yes, replaced that sensor. CEL is off now. Going to swap my friend's wideband onto the car today along with the other MAF. I'll see what happens.
  10. A

    331 dino still very dissapointing, experts help needed

    I agree. I'm hoping the MAF will change things drastically.
  11. A

    Optima ?

    I will echo that, my optima is freaking awesome. When I put my car back together I forgot to plug in the load wire on the alternator. I ran the entire car, fans, and lights for nearly an hour before I even noticed the battery was getting low on juice. Freaking awesome!
  12. A

    DYNO RESULTS from my 331 swap

    Tmoss, what would you recommend as far as a better intake then? EDIT: To eliminate confusion and keep things up-to-date. This thread has been continued here http://forums.stangnet.com/showthread.php?t=634778&highlight=running+rich with updated information.
  13. A

    331 dino still very dissapointing, experts help needed

    On that note, when I switch MAFs, I want to have the fuel pressure set at stock levels. Seeing as how the fuel pressure is so low right now, is there a certain amount of time that the computer takes to compensate, or is it as easy as bumping the pressure back to 40, unhook the battery, switch...
  14. A

    331 dino still very dissapointing, experts help needed

    I have full exhaust, BBK long tubes, no cats, h-pipe, ultra flows. Its a 5-speed too.
  15. A

    331 dino still very dissapointing, experts help needed

    331 dyno still very dissapointing, experts help needed Ok, recently swapped in a 331 stroker motor. Have a C&L Maf calibrated for my 30lb injectors, AFR 185s with FTI upgraded spring package, Performer RPM intake, and an FTI custom cam (Gross Valve Lift: .5728 / .5632; Duration 224*/ 228*) with...
  16. A

    dcc fan controler

    There is a phone number on the site if you look hard enough. I'm not sure exactly where, I think the instructions to install one of the units. Down at the bottom there is a service number.
  17. A

    New Engine won't lean out

    Not to hijack but just for my own knowledge, does this place 30lb injectors within the spectrum of the computer's ability to adapt?