Search results

  1. Internexus

    Beating A R6

    Haha it's all in fun though :D thanks for the compliment, appreciate it! The cars so fun it's just unreal all of the features they packed into one ride, cant wait to get the new setup finished this year and hopefully go lay some lengths between the bikes and get some more vids for all ;)
  2. Internexus

    Beating A R6

    I've had a handful of encounters with bikes, this is with an 01 yamaha R6, the first race (vid) he beat me by about a bike length, second race I had a car on him but sadly I have no video of the 2nd race :( Enjoy. http://www.absurdparadox.com/media/hosted/internexus/turtle.avi
  3. Internexus

    Anyone spraying their Mach?

    Yeah last time I ran a 110mph trap on pump and 15psi and I should be good for around 112-114mph now.
  4. Internexus

    Anyone spraying their Mach?

    Thanks bud :)
  5. Internexus

    Anyone spraying their Mach?

    Rather curious of what kind of numbers you are putting down whether they are dyno or track if you have a mach with spray only or very minimal mods. I ran into one yesterday that was rather stout I thought. Pulled over and he says he just bought it (still had 30 day tags on it)... The car...
  6. Internexus

    Solution for clogged heater core?

    Thanks a lot guys, I will post results if I can get this accomplished this week (time pending) :D
  7. Internexus

    Solution for clogged heater core?

    Okay sounds good, just need to get something to plug the lines upon removal and also need a hose to go to the return line to reach to the air compressor hose.
  8. Internexus

    Solution for clogged heater core?

    Thermostat is fine. 84blkstang did you do that in the feed line or the return line to blow it out? You did this while it was still installed right? I figure as long as I use a low enough pressure it should be okay, it's effectively a tiny intercooler obviously... Should be able to hold air...
  9. Internexus

    Solution for clogged heater core?

    I get no heat in my car.... It's been as cold as -1* so far and it's not very pleasant cruising to work. Warmed up the car and put my hand on the upper radiator hose, gets to warm to touch after about 5 sec or so. Then move onto the heater hoses for the heater core. The feed line for it is...
  10. Internexus

    Solution for clogged heater core?

    I have a vehicle with a clogged heater core and of course you have to pull the entire dash for it which I don't really feel like tackling such a job so I am curious if any of you have tried anything for unclogging a heater core WHILE still installed? The only thing I can think of is to...
  11. Internexus

    Whats a bent rim's vibration like?

    So even say at 10mph I would notice the vibration with a bent rim? The brakes were serviced before I got the vehicle with new rotors/pads etc... So i'd hope that those would be okay.
  12. Internexus

    Whats a bent rim's vibration like?

    I have a vibration on my car but haven't ever experience a bent rim before but these wheels came with the vehicle from the previous owner and all have curb rash. I am trying to get an idea of what kind of vibration it would cause as this vibration starts at 55mph and will be with me to any...
  13. Internexus

    Best tool for cutting plenum??

    Hmm I wonder how much a machine shop would charge for this.. Guess I will have to call around hopefully it turns out to be fairly cheap. Don't need to spend to much for my practice :P
  14. Internexus

    Best tool for cutting plenum??

    Great thanks for the informative reply! I asked my father and we don't have a band saw so I will just have to invest in one I guess and we already have the welding tools for me to practice putting it back together. A lot to be learned! Thanks again!
  15. Internexus

    Best tool for cutting plenum??

    Sorry I forgot the 5.0 plenum is vice versa of the stealths runners lol. Yes I want to go ACROSS the runners from the distributor to the rear of the engine bay. Is a band saw a relatively cheap tool? Isnt that whats used for cutting wood?? :) Thanks!
  16. Internexus

    Best tool for cutting plenum??

    What would be the best tool for cutting right down the center of the runners on an upper plenum with? I am planning on shortening the intake on my stealth by about 2 inches and am gonna use my 5.0 intake as the guinea pig to learn on :) Thanks!
  17. Internexus

    Using alcohol? Information please.

    Okay I did not realize you had to run twice as much fuel so Alcohol is now OUT Of the question!
  18. Internexus

    Using alcohol? Information please.

    Yes it could be used as a supplement to... In fact the Stealth/3000gt Platform already has propane injection setups to use it for supplement to squeeze an extra 6-8psi on pump gas. Methyl I am not familiar with care to elaborate of what it is, octane and where to obtain and if there is needed...
  19. Internexus

    Using alcohol? Information please.

    I was doing my share of research and haven't found any info for ethanol being used on fuel injected vehicles. They were all on carbed. It did not necessarily specify tuning as needing to be vastly changed except for boosting timing up anywhere from 8-12 degrees of what you use on pump gas...
  20. Internexus

    Using alcohol? Information please.

    Do you have to prepare your fuel setup in any way to run Alcohol as your primary fuel source on a fuel injected setup? Do you have to lubricate the setup with some Marvel Mystery Oil or anything? Last but not least.... Anyone know what octane rating Alcohol is rated at? Thanks...
Top Bottom
Back
Forums
Menu