Search results

  1. NIN

    oil dipstick interferance

    After futher inspection the sound seems to come below the car. around the H-pipe area. Could this sound come out of my H?
  2. NIN

    power #'s

    I just said crank because That is how the manufacturers rate thier cars and I would like to be able to compete with some of them. I just saw an 03 cobra and made me dream some more. I figure 400 would be in the range of the cobra and i wouldn't have trouble with tech inspection at autoX. If I...
  3. NIN

    power #'s

    Can I make 400 HP at the crank with a 302 block and have it streetable? My goal is to make 400HP NA, if not i will go with forced induction. I want to have a before I have to replace my motor in a couple of years. Thanks, Tom
  4. NIN

    oil dipstick interferance

    I don't even notice it under accelleration. I only hear it at Idle and at slower cruising speeds.
  5. NIN

    oil dipstick interferance

    That is what it sounds like, but I would hate to do a teardown to find out this it was an exhaust leak. I'll get a stethoscope to try to pinpoint it. thanks, Tom
  6. NIN

    oil dipstick interferance

    I did some looking around and it's not the dipstick. It's either a lifter or an exhaust leak. How do lifters sound when the get loud? I've had problems before the these headers so I wouldn't count them out.
  7. NIN

    injectors

    What do you run with the 306?
  8. NIN

    injectors

    Sould I be upgrading to the 24lb injectors with my setup. Stock cam BTW. I was wondering if running the 19lb may cause damage to my engine. Thanks, Tom
  9. NIN

    Overheating

    What he said.
  10. NIN

    oil dipstick interferance

    I'm hearing a click/ticking sound comming from my car near the engine. But it is louder under the car. When I jacked up the car I saw that the dipstick is against my drivers side header. Could this cause the clicking noise that I'm hearing? would some header wrap help out here. Thanks, Tom
  11. NIN

    Wide band o2's

    Could 19 lb. injectors cause a little tick or lifter like sound in my engine? It might be an exhaust leak also, I having a little trouble tracking it down. Thanks, Tom
  12. NIN

    autocross

    Sounds good, that is exactly what I wanted to hear. Thanks again, Tom
  13. NIN

    autocross

    Can my 94 compete with little imports in autocross or will I get spanked? Would I have to drop a ton of money into it to get it to take a corner?
  14. NIN

    Wide band o2's

    How can I tune cold starts?
  15. NIN

    Balancer probs?

    I bought a craftsman extension and it came right off. I got it torqed on there at 120 ft/lbs. but the pulley spacer is to deep for the bolts. Guess I will go to the hardware store and tomarrow and to get some replacements. Thanks for all of your help. Tom
  16. NIN

    Wide band o2's

    Do I need to get wideband o2's to get a decent tune? I've been having problems when she is cold like bogging and won't start right away. When she warms up she is fine. Don't get me wrong It is much better then is used to be. As long as it is warmed up.
  17. NIN

    HP?

    throw in cam and intake with the rest of the supporting cast and you may get an extra 100.
  18. NIN

    Balancer probs?

    That explains it! Could we ask anything more from ford?
  19. NIN

    Balancer probs?

    Does the bolt come off in a different direction? I'm doing it above the car and i've gone though two adapters connected to gather to make an extention, bad Idea, and a 1/2" extention. just twisted right off. if your looking at the front of the engine I'm pulling left, is this the right way? Do...
  20. NIN

    Balancer probs?

    How do you get the Damper bolt off? The crank keeps turning so I can't get it off. I got the pulley ones off fine but the one in the center is really on there. Any tricks?
Top Bottom
Back
Forums
Menu