Search results

  1. 18mustangs

    New Edge 01+ Spoilers on our cars?

    The mounting points don't line up with our mounting holes. If you don't mind doing some body work you can swing it. I'd just be worried the appearance of a sharper angular spoiler on a rounded edged car. Just my opinion. Tim
  2. 18mustangs

    Fox throttle body swap (First impressions)

    It isn't very scientific, but the SOTP meter really felt the gains when I switched to the Fox setup. Throttle response was also night and day. Tim
  3. 18mustangs

    Fox shortblock in a 95?

    I did the Fox TB swap. If you need the instructions and part list PM me and I'll send it to you. Good luck with whatever course you choose! Tim
  4. 18mustangs

    Hood clearence issue with GT40 intake and fox TB???

    I did the fox TB conversion with the 93 cobra intake which is taller than the GT40 intake and the TB PCV air tube only rubbed the hood blanket...no real problems. Tim
  5. 18mustangs

    Just bought a 95GT and found some suprises

    Here's the info from my Fox Throttle BOdy conversion. I used the 93 Cobra intake scenario but have covered the standard GT or aftermarket scenario as well. I was able to get my 93 Cobra PCV hoses (different from the SN95 or Fox GT PCV hoses) at the Ford Parts department...special order for...
  6. 18mustangs

    fox harmonic balancer fit??

    Worked wonderfully on my car.
  7. 18mustangs

    SFC's with Borla side exit

    Kenny Brown Super Subs...but they're pricey.
  8. 18mustangs

    3 1/2 intake hose

    Come on man, if you're not buying neon lights and $25 "performance" guages in the rice section there's no reason not to get the parts that you need just because it's in the "wrong" aisle. It's like one of Murphy's laws of combat..."If it's stupid and it works, it's not stupid".
  9. 18mustangs

    Will 93 Valve Covers fit a 94?

    I run Fox VCs with no clearance problems with the alternator or intake, but then I'm running the 93 Cobra intake which solved the plenum to VC clearance issue..
  10. 18mustangs

    CAI for 93 TB conversions.

    I modified my SN95 CAI and used a Fox C&L pipe.
  11. 18mustangs

    Is my Car Possessed or terminaly ill

    I'm not sure what 65mm you're running, but if it's the FMS one try putting the 65mm back on but using the electronics (or just the IAC) from the stock one. Tim
  12. 18mustangs

    Throttle body

    Are you serious? :shock: The coolent runs through the EGR spacer and not the TB. The purpose of the coolent lines is to cool the EGR spacer which is indeed a seperate piece and would lend considerable heat to the intake charge if not cooled. Also of note 93 cobras, and 94\94 GTs and cobras...
  13. 18mustangs

    EGR Removal?

    DON'T DO IT!!! I capped off my EGR because my BBK LT headers didn't have the EGR bung...big mistake as my car had a severe detonation problem afterwards that only stopped after I did the Fox TB converstion and ran the Fox EGR setup. There are no benefits to deleting EGR other than "cleaning up...
  14. 18mustangs

    Rio5.0 and whomever else can help.

    I used the Fox vacuum tree as it made everything a lot easier. The FPR is still connected to the FPR on one end and to any vacuum source on the intake on the other, the EGR is still connected to the EGR on one end and to the firewall vacuum tree as normal, the PCV is connected as you have it in...
  15. 18mustangs

    BBK 70mm throttlebody......?

    Me too Illwood, I went from an SN95 FMS 65mm to the Fox BBK 70mm and noticed no ill effects. Any power increase I think came from going from the GT to the cobra intake. Tim
  16. 18mustangs

    How to plus smog pipe on o/r x-pipe?

    A whole lot of JB Weld works great. Tim
  17. 18mustangs

    Air.

    Great call Zero! I had the same problem, went outside after reading this and the little guy was broken clear through. I fixed it immediately with some rubber vacuum tubing and zip ties to keep the rubber tube attached to the broken ends of the plastic vacuum tubing and the HVAC controls work...
  18. 18mustangs

    Mach 460 sound system?

    The literature I received from Ford said the 5x7s in the front doors are bass only and the sail speakers (what everyone incorrectly calls tweeters) are actually mids and highs. Tim
  19. 18mustangs

    can i put a 95 cobra intake in my 1990??

    Yes you can, but it's a PITA and there's a reason why us SN guys do the Fox TB conversion! The Fox setup is cleaner, offers better clearance with regards to valve covers, and the EGR is internal on the Fox setup. Just sell or trade the upper to an SN guy looking for a cobra intake who can only...
  20. 18mustangs

    Spacer needed for tall ford racing valve covers?

    The throttle cable bracket will hit the tall VCs without a spacer. Ford claims the tall VCs need a 1" spacer, and you may have clearance issues with the alternator. A couple of people I know with those VCs on SNs had to do a little grinding near the alternator on the VCs for proper clearance. Tim
Top Bottom
Back
Forums
Menu