Search results

  1. chickendreamer

    TURBO Q's?

    It depends on what size fitting is going into your oil pan, if it's a 1/2" (-8AN) you should be ok, but if it's smaller you might have oil leaking past the seals and pulling it into the engine.
  2. chickendreamer

    HG....AGAIN!!! Which HG goes on backwards??

    Installation and tune is a big part of it, I will agree with you but the GT40 heads still have a thinner deck surface .500 or so where if you were to look at the edelbrocks for example they have a .625 deck surface. Don't ask me to explain the physics behind it but bet per bet you'll have more...
  3. chickendreamer

    Turbocharged stang dynbo numbers.

    For some of you who asked questions. The car has the base computer settings in it, there is NO TUNNING, boost was about 8-9psi, and the timming was at 16* spout pulled. This friday i'll be getting the car tuned this friday but it will be on a mustang dyno rather than a dynojet as these numbers...
  4. chickendreamer

    HG....AGAIN!!! Which HG goes on backwards??

    Just a heads up, those GT40 heads are notorious for blowing head gaskets. Might I suggest going to a TFS, Edelbrock or AFR head, then you won't be relplacing head gaskets all the time. :)
  5. chickendreamer

    Turbocharged stang dynbo numbers.

    Nope, no FMU.
  6. chickendreamer

    Turbocharged stang dynbo numbers.

    95 Mustang, HP Performance HP Turbo w/ T60-1, Edelbrock Performer RPM Heads, Performer RPM Intake, Stock Cam, 1.6RR's, 9.4:1 compression pistons, 42lb injectors, pro-M univer maf is the basic engine combo. Stock computer, untuned, 16º total timming, about 8 lb's of boost, 39psi fuel pressure...
  7. chickendreamer

    Stupid question from mustang newbie..

    Take out your owners manual and look there. It tells you where to jack it up.
  8. chickendreamer

    Tri-ax... Best place to buy???

    Steeda? :rolleyes:
  9. chickendreamer

    need answers please, these questions are plagueing me!

    Superchargers... yawn, go turbo. :nice:
  10. chickendreamer

    Polishing a Nitrous Bottle?

    Yup
  11. chickendreamer

    Help me decide and no its NOT 3.73's vs 4.10's!!!!

    Smoked headlights looks like puke, tint the windows.
  12. chickendreamer

    351 swap part # listing - I just need a couple more!

    Ok, so I’ve done most of my research when it comes to the 351 swap in a 95 mustang. I have made a list of the part numbers but I am wondering if I am missing anything. Please let me know what the part is and the part number. I really appreciate it! Oil Pan - Ford Racing P/N M-6675-A58 Oil...
  13. chickendreamer

    EVERYONE...Post 1 or 2 of your FAVORITE PICS of your Car!

    My ride Best ET:12.498 @ 110.15mph
View older results
Top Bottom
Back
Forums
Menu