Search results

  1. steveb24

    Unexpected Findings, Steeda Bumpsteer Kit

    some good info from steedas site.. If the stock K-member, spindle and balljoints are used, the best position is more likely to be with the rod-end at the middle to top of the stud (more spacers at the bottom). If the Steeda X2 balljoint is used, the best position is most likely to be...
  2. steveb24

    mac long tube question

    dont know who you heard from.. My performance shop guy said my ceramic MAC LT's fit the best out of any LT he's ever seen.. and besides that, they are great. I used percys seal-4-good gaskets and the bolts that came with it and they are never coming loose. I also went and bought some ceramic...
  3. steveb24

    Alignment with bumpsteer kit

    need some install input on ball joints please.. and some C/C plate advice. thanks guys
  4. steveb24

    Cam Questions

    Unless you mean VALVE COVER gaskets, return them. You dont need new cam gears. You dont need to pull the timing cover. Pull the valve covers off, remove the cam tensioners, put the motor to TDC, remove cam bolt, have somebody hold the chain and DONT let it move!, slip out old cam- put in...
  5. steveb24

    Alignment with bumpsteer kit

    Slicks, thanks for the help.. Tonight I ordered bumpsteer kit, x2's, poly offset rack bushings for $255 from stangsuspension with a email discount.. thought that was a deal. it was a package, dont know anything about the offset bushings so we'll see about them. also ordered H&R...
  6. steveb24

    Alignment with bumpsteer kit

    Yeah, good info guys. Let me just pose this situation... Say I install the new ball joints, then install the bumpsteer kit and make the new tie rod end exactly even with the control arm, and then go get a regular alignment. wouldnt that be good enough? my other option is get the kit and...
  7. steveb24

    Alignment with bumpsteer kit

    nice write up! seems really simple, have you ever had problems using your methods??
  8. steveb24

    Alignment with bumpsteer kit

    hmm.. well is there anybody who has a prokit and a bumpsteer kit? I assume i just need to know approx how many spacers to use right, and make sure the tir rod end is parrallel with the ground. I got quoted 235 for bumpsteer and ball joint install, without alignment. Id much rather install...
  9. steveb24

    Alignment with bumpsteer kit

    how hard is it just to install the kit? I would take the arms to a shop for the ball joints, but what about the rest of it?
  10. steveb24

    Alignment with bumpsteer kit

    Hi all, Im in need of a bumpsteer kit. The only thing that concerns me is how to get the alignment done. would a regular alignment shop know how to work with these things (assuming I buy the Steeda kit)? I dont know how complicated they are, they look easy to install but tricky to adjust. any...
  11. steveb24

    Blue fuzzy stuff on negative terminal..

    hah.. didnt think it was soo common. thanks guys, big help. sn does it again
  12. steveb24

    Blue fuzzy stuff on negative terminal..

    hmm.. alright.. well thanks for the info. it def looks kinda funny tho, just hope it isnt anything serious
  13. steveb24

    Blue fuzzy stuff on negative terminal..

    so does anybody know why.. about every week.. one might have this blue fuzzy junk growing on my battery terminal, just the negative one? its kinda weird, and have no idea why this would occur. thanks
  14. steveb24

    180 degree t-stat in 4.6

    I have a 180 and its fine. i like it.. maybe takes a minute or two longer to warm up, but @ 180 its not a big diff, just bring down your hi and low fan temps with a tuner as well
  15. steveb24

    finish spring install.....

    my prokit sags on the drivers side as well. Ive adjusted the springs 3 different times to correct it and the closest i can get them is the drivers side only sagging about a half inch. This is only dealing with the rear springs though. im out of ideas to correct it.. but was maybe thinkin about...
  16. steveb24

    Help need a link to buy a factory 6 disc changer for my 03 GT

    I got one w/ a new wiring harness sittin right here.. perfect condition.. (get the hint?)
  17. steveb24

    What about this front suspension setup??

    Somebody have any expirience with these products??
  18. steveb24

    What should idle RPM be?

    I run 900 w/ the cams. idles smooth. i would do like 700 w/ the cams to get a nasty sounding lope, but it shakes the car too much :D
  19. steveb24

    What about this front suspension setup??

    Im thinkin about getting X-2 Balljoints, Steeda Bumpsteer kit, MM CC plates and maybe new sway bar end links. Would this correct my nasty bumpsteer and crappy sloppy front feel? thanks SN. just want to settle this and get one final alignment. right now I have the Eibach Pro kit KYB AGX...
  20. steveb24

    Crazy steering wheel over any bumps..

    I have 265's up front.. ill look under there, and im about to put on my 245 winter tires so i'll see if that makes any diff. thanks for the response.. anyone know of any good install guides/ tips for the x2 balljoints and bumpsteer kits? i think thats what i might do.
Top Bottom
Back
Forums
Menu