Search results

  1. Bugman.dave

    Radiator Draincock

    Thanks, that helped answer some other questions also,...
  2. Bugman.dave

    Radiator Draincock

    Does anybody know where the radiator draincock is in an 01 GT. I'm in the process of removing my A/C. Part of the proceedure is to remove the coolant reservoir and tilt the rad back allowing removal of the A/C condensor. I've looked, but can't find a draincock. According to my repair manual...
  3. Bugman.dave

    Accufab 75mm TB/Plenum Install Write-up (Biggest DUW Ever)

    yes you can use your stock TB with any of the aftermarket plenums.
  4. Bugman.dave

    Accufab 75mm TB/Plenum Install Write-up (Biggest DUW Ever)

    Great write up and photos,... I purchased the BBK plenum and it comes with the two different sized adapters. For those of you not wanting to play around with the TPS, Ford offers their 70 mm TB with the TPS attached. The price on it has come down by the way,...
  5. Bugman.dave

    Rack bushing people!! I have ???s

    No, no vibration and yes you have to cut the sleeves, but really it's no big deal,... very easy I found. Actually what I did was buy new ones just in case I screwwed up. Besides they are cheap and why not make it a totally new install. What I did find was I had to grind off a very poor weld...
  6. Bugman.dave

    Rack bushing people!! I have ???s

    I have the solid MM rack bushings, that coupled with a Flamming River steering shaft makes for some very tight steering. It also moves your rack back a bit.
  7. Bugman.dave

    Shock Question (Top Nut, Front Struts)

    Perhaps you have too many spacers under the C/C plate.
  8. Bugman.dave

    E10 vs std 87 oct RESULTS ARE IN

    Not just you 88,.... what is it?
  9. Bugman.dave

    HIGH IDLE CANT ADJUST!! i need my car!!

    Here's more. I hope this helps,... TPS adjusment, and idle relearn -------------------------------------------------------------------------------- How to set the TPS, (throttle postion sensor) You want the TPS voltage to be set under 1 volt. Setting it to .93 to .98 is good range...
  10. Bugman.dave

    HIGH IDLE CANT ADJUST!! i need my car!!

    Steve this may help,.. I got it from doing a search on Yahoo "Mustang TPS adjustment" http://forums.stangnet.com/showthread.php?t=449657
  11. Bugman.dave

    HIGH IDLE CANT ADJUST!! i need my car!!

    Sorry I can't help you any more than that steve,.... I know it's just a matter of measuring the voltage at the TPS, but I can't tell you the proper wires to tap into. I'm almost sure that's what the problem is. That set screw on the TB is not to be adjusted, in fact the screw is made not...
  12. Bugman.dave

    HIGH IDLE CANT ADJUST!! i need my car!!

    Everytime I hear somebody changed a TB and had to change over a TPS from the original TB this happens if the TPS is not positioned properly. To tell you the truth I purchased a FMS TB that had the TPS already positioned just for this reason. Check previous threads I know I read the exact...
  13. Bugman.dave

    HIGH IDLE CANT ADJUST!! i need my car!!

    Does the BBK TB come with a TPS? If not did you adjust the TPS to read .98 volts?
  14. Bugman.dave

    MAC CAI Filter Cleaning

    I think it's time I clean my air filter. The fact that it needs cleaning is not the isssue really. What I am concerned about is how I re-oil the filter after cleaning. I purchased a K&N cleaning kit. It contained a cleaner and a compressed can of oil. The instructions in the box only...
  15. Bugman.dave

    Short Throw Shifter

    I use a Hurst shifter. It has a slightly longer handle than others. I have aftermarket seats and find my arm is uncomfortable when shifting with the shorter levers. The longer lever and the short throw of the Hurst does the trick. Ford motorsport sells the kit.
  16. Bugman.dave

    LCA install more than I expected

    If you decide to replace the bushings in your front control arms with either delrin or urethane you have to pretty well burn the old ones out. If you decide to replace the bushings on the upper control arms (the axle side) buy the tool from Maximum motorsports. My thumb is still swollen. I...
  17. Bugman.dave

    Those with 99-01 Cobra Bumper on GT, HELP!

    Those Cobra bumper covers are still listed in the FRPP cat
  18. Bugman.dave

    Those with 99-01 Cobra Bumper on GT, HELP!

    They plug right in,... I didn't use mine as I want to go with brake cooling ducts,.....
  19. Bugman.dave

    Romeo or Windsor. What's best?

    Windsors motors do have an 8 bolt crank as do all Cobra motors. The Romeo motors have 6 bolt cranks.
  20. Bugman.dave

    Romeo or Windsor. What's best?

    I have a 4.6 SOHC with a Windsor motor. Just what motor is best. I understand the Windsor crank is an 8 bold. Is this a better engine to upgrade?
Top Bottom
Back
Forums
Menu