Search results

  1. M

    pushrod length.. old tw heads

    i just got a killer deal on a set of twisted wedge heads. the only thing is that they are old school pedestal mount. i have read on here about the valve guide issue they had, but these have been completely redone with diff valves portwork and everything else. the question i have is does anyone...
  2. M

    Suspension Swap 1990 to 1999 & Later

    the front spindle/brake swap is a very common thing as you get better braking and a 5 lug bolt pattern which opens you up to quite a few choices for wheels. for the rear i know they make a set of backing plates which allows you to run the rear rotor disc set-up but i am not sure if those...
  3. M

    edelbrock heads Q..

    i am going to use the "appropriate" valvetrain for the cam i am using. and all i wanted to know is will those heads work on a 5.0 block, not a lecture on what i should do.. i know there is better out there, but i am not looking for the "best" just whatever gets the job done, at the best price...
  4. M

    Wheel fitment help needed.

    i personally love the look of that wheel on the foxbodies. i dont feel that it is a very good wheel for the 94+ stangs but think it is an awesome choice for the foxbodied stangs
  5. M

    edelbrock heads Q..

    i got yah, and i am wanting to make 425 RWHP after supercharging... i may not have made myself clear earlier. as for the cam choice would say a trick flow cam be better, or is there one you think would be a better choice ?? i am not wanting to go too radical with the cam nor the heads, and keep...
  6. M

    Wheel fitment help needed.

    not trying to hijack this thread, but seeing it made me wonder if the 94-95 tri-bar 17" wheels would fit with the mark vii rotors since it has a deeper center cap area, or you would need the spacer for them as well ? i know the 16" ponies fit without using the 94+ spindles but have always...
  7. M

    edelbrock heads Q..

    in reference to the cam, i was only saying that since someone posted earlier they hadnt seen good results with boost and a letter cam, and i was just wanting to ask the question to find out if there are any results on it not being a good blower cam... i figured being that the edelbrock head are...
  8. M

    edelbrock heads Q..

    since when is an f-cam not suitable for boost? everything i have ever seen both on the net and in person has shown good success with an f-cam and boost... and on the note of heads.. trick flow heads are 1200 bucks.. and the others a little more expensive.. the reason i ask about those...
  9. M

    edelbrock heads Q..

    the bore is whatever is stock plus .030 . the bottom end is actually pretty well built, fully balanced and machined with forged components, so i dont think the rpm would be the issue, i was just looking for a decent aluminum head that would let me see about 425 rwhp when i finally get a...
  10. M

    edelbrock heads Q..

    i was looking through one of our catalogs at work since we are an edelbrock dealer, and i can get great deals on edelbrock parts. i was looking for a sb ford cylinder head that had studs for rockers, so that i could get away from the pedestal mount style rockers, and these were some of the ones...
  11. M

    edelbrock heads Q..

    ok i am looking at a set of edelbrock 60229 castings for my project i am working on. they seem to be the same as all the other edelbrock heads i have looked at except these dont have the steam holes drilled.. and i was curious exactly what they are referring to. i was thinking it might be the...
  12. M

    rocker question...

    is there an aftermarket stud mount roller rocker in the 1.6 range i can use with the factory valve covers? or trick flow short valve covers ??
  13. M

    injector question

    the injectors out of a newer cobra like that are a different style plug in i believe, so you would need some adapter plugs made, and although i know of people making adapters to put old style injectors in a new stang like that i dont know of anyone making them to put newer style injectors into...
  14. M

    TFS head part #'s

    ok i was earching through summit cuz i have been reading up on picking some of these up and i saw this part number TFS-51400002 link: Trick Flow Specialties TFS-51400002 - Trick Flow® Twisted Wedge® Street Cylinder Heads for Small Block Ford - summitracing.com and then this part number...
  15. M

    omg help.. car is almost together, missing one thing!

    the 9/16-14 refers to is being a 9/16" i.d with a 14 thread count per inch i believe. just tell them you need a 9/16" corse thread or u.s.s. nylon lock nut.. they should know what you are talking about.
  16. M

    would this combo be decent ?

    thanks.. i was wandering if that intake may be a bottle neck or not... i just didnt know how well those heads did flow, since i never did find any real info from people who were using them. also am i correct in thinking that the windsor sr's would outflow the jr's ? i know it sounds dumb and...
  17. M

    would this combo be decent ?

    ok first off let me start by saying that i know these heads arent the best out there, but i can get them for 650 brand new from work. yes 650, thats after paying freight. anyways here goes. basically it would be a trick flow street heat intake with an f-cam, and a set of world products cast...
  18. M

    granatelli MAF question

    the exact driveability issues are a bad idle when i first start it in the morning, and then some slight bucking of the car up until about 2200 rpms, when just cruising even when warm. when i open up the throttle it runs fine all the way through the powerband it is only when driving around. i...
  19. M

    granatelli MAF question

    i have a brand new TPS set at .99, and a new IAC as well as a new coolant temp sensor, and basically all new sensors. the filter is an open elemtne filter basically where the original box was at, but i am using an electric fan that is hidden inside of the original fan shroud..... the only things...
  20. M

    granatelli MAF question

    the car has a full exhaust, a trick flow intake, and an frpp f-cam for mods. it has the 24 lb injectors, a 70mm throttle body and that MAF. it is also has a built bottom end although that has no affect on it needing 24lb injectors. i dont know why they are on here, it came with them. i was just...
Top Bottom
Back
Forums
Menu