Search results

  1. ShortThrow50

    New heads, new cam, new experiences

    im confused a little. Are you running a solid cam or something?
  2. ShortThrow50

    Suddenly Grinds when going in to reverse.

    normal. I had a 1990 gt back in 91 that had 4k miles on it when i got it and i always grinded in reverse. The most recent 5.0 i purchased had only 65k miles on it and did the same thing. Everywhere i read about 5.0's they all grind in reverse. I also read that the t5 trans does not have a...
  3. ShortThrow50

    Can you push lifters down by hand?

    Its stock huh. Will you cant adjust your vavletrain them dude. Your rockers are torqued to spec then. Basically they just bolt on and thats it. if you have a valve train noise then its possible that you have a bad lifter. The beuty of hydraulic lifters is they compensate. How many miles on it...
  4. ShortThrow50

    WHAT FUEL INJECTOR IS THIS

    it looks weird
  5. ShortThrow50

    Can you push lifters down by hand?

    I think there may be some misleading info here. the op doesnt give much info either. If you CANNOT tilt your rocker or push the pushrod down by hand and have the plunger go down, given that your lifter is NOT filled with oil and both valves are in the CLOSED position, then you have adjusted your...
  6. ShortThrow50

    few quick chassis to engine ground ?'s

    thats what i thought as well while reading this thread
  7. ShortThrow50

    Getting a new 331 stang for 500 bucks! need head gasket help

    331 stang for 500 bucks!!? sounds like it prolly needs more than a headgasket lol. Got any pics?
  8. ShortThrow50

    How much should i cut my coil springs? Pic inside

    Ok so scrap the idea of cutting any more of my springs. This guys drop looks perfect. Is this with all Iso's in?
  9. ShortThrow50

    How much should i cut my coil springs? Pic inside

    ride quality how bro? I dont care if it gets stiffer. I dont mind at all. This car sees 200 miles a year at the most. Its a garage whore. I just want this thing to look low and nasty. Removing iso's is not an option, i dont want my metal to get deteriorated
  10. ShortThrow50

    How much should i cut my coil springs? Pic inside

    Took this pic 2 years ago after i put my frpp "c" springs inw/ all new iso's and one full coil cut off rears. How much d you recommend i cut off both front and rears. I still have a rake even with the rears cut. I would like the rake gone and have almost no gaps in the tops of the fender to top...
  11. ShortThrow50

    BBK equal length headers 87-93

    yeah its no biggie, its just like putting a 1/4 inch restrictor plate in one of your exhaust ports so that particular cylinder isnt up to par with the rest. In fact some people port 7 intake holes and leave one the way it is becuase it doesnt effect performance.
  12. ShortThrow50

    Twisted Wedge from Trick Flow

    LOL. I should take a pic next time when i film my 347 stroker setup. I use painters tape and tape it in between the 2 back seat back rests. You would laugh if you saw what i did, but hey it works
  13. ShortThrow50

    Twisted Wedge from Trick Flow

    no problem
  14. ShortThrow50

    Your thoughts on this cold air intake please

    no i havent That was what i thought. I always usd a k&n in there and i removed the air siencer. I dont know why all these tuners are always so hell bent on cai's.
  15. ShortThrow50

    Your thoughts on this cold air intake please

    i have a 347 stroker goin in my car and my tuner said i would be restricting i with the stock air box
  16. ShortThrow50

    Twisted Wedge from Trick Flow

    its a great kit. heres videoof my car right after i installed it on my car when i had stock 302 short block YouTube - My 93 LX right after my trickflow H/C/I and Tko 600 install
  17. ShortThrow50

    BBK equal length headers 87-93

    Wee you aware of this dent? I would be bitchin. To me, 1/4 inch would be alot for one exhaust port
  18. ShortThrow50

    Your thoughts on this cold air intake please

    eh, i figured. just needed some reassurance. thanks
  19. ShortThrow50

    Your thoughts on this cold air intake please

    This company is 5 min. down the road from me and compared to the leading brands, it is half the price. Was thinking about buying it. I mean cold air intakes arent rocket science, right? The only thing i see possibly wrong is that the filter looks to be a little small. 5.0 Mustang Cold Air...
  20. ShortThrow50

    5.0 cam upgrade ?

    Heres a vid of my cam lope hen i ran a trick flow stage 1 cam YouTube - Trcick flow H/C/I 5.0 mustang
View older results
Top Bottom
Back
Forums
Menu