Search results

  1. PoliceInterceptor

    where to find exhaust

    If you are looking for a stock style GT exhaust, any of the usual suspects should have it. Mustangs Unlimited, NPD, Tony Branda, Paddock, California Mustang, Virginia Mustang, Dallas Mustang, CJ's and so forth. Summit probably has Flowmaster systems.........
  2. PoliceInterceptor

    What's a good company to go with for limited slips?

    Yes, one of those third members would fix it as long as you didn't break a shaft, which would be quite obvious. Minimum investemnt is to order a set or bearings and gears, and build it yourself. There are quite a few websites that cover it, but its a serious pain in the rear and you need some...
  3. PoliceInterceptor

    Thank you 4 engine ID: Now carb question

    Sounds like a homemade vac plug. Shoot and post a picture, we can tell you what it is.
  4. PoliceInterceptor

    What's a good company to go with for limited slips?

    If it is whining you can count on gears and bearings. Then you will have to set it up, and that isn't for the faint of heart. What you should probably do is try to find a good used or rebuilt third menber (or "CHUNK") Places like Currie, Strange, Mosler, etc can build you one, then its only...
  5. PoliceInterceptor

    What's a good company to go with for limited slips?

    I'd run a True Trac if it isn't a drag car. Mid 300.00 range for a 9" from places like 4 Wheel Parts: Its a gear type tourque biasing limited slip. For a drag car, Detroit Locker all the way if you can stand the noise. See my link Above.
  6. PoliceInterceptor

    What's a good company to go with for limited slips?

    8" or 9"? :shrug: http://www.tractech.com/Products.htm
  7. PoliceInterceptor

    New to forum (Whats with this engine number?)

    The manifold tag decodes as a 289 "C" code.
  8. PoliceInterceptor

    Uhh...Question...lol...Carb related I think

    Floats are lots cheaper than edelbrock CARBs. :D What kind of Holley is it? Is there still a place in Kennesaw named the Mustang Farm? On Moon Station Road if I recall correctly? (I'm not making it up) Super nice guy, but it has been years since I was there. Had a GT350 stashed in the...
  9. PoliceInterceptor

    Differential question.

    Here is another one. Note that the ends of the axel are not a 100% fool proof way to identify 31 spline axels. http://www.kevinstang.com/Ninecase.htm
  10. PoliceInterceptor

    Which igntion set-up?

    Stay away from the plain ignitor. people have burned them up by leaving the key on like listening to the radio. The ignitor two is reported to be much better. I personaly like the crane:
  11. PoliceInterceptor

    trac lok differential question

    Heres a link to an auburn for an 8" http://nationaldrivetrain.com/pages/posi/auburn/pages/proseries.html
  12. PoliceInterceptor

    trac lok differential question

    No the 7.5 was a predecesor to the 8.8. You will probably have to go outside of ford racing to get one.
  13. PoliceInterceptor

    Detroit Locker VS True Trac.

    Its a 2wd, so no off roading (beyond some dirt roads) Looks like the electrac is a dana only thing. Looks like I can also gat a "softlocker"?
  14. PoliceInterceptor

    Taking bets on what's wrong with my motor...

    That is what I was thinking
  15. PoliceInterceptor

    Detroit Locker VS True Trac.

    Well, looks like I'll just have to pop for a new diff. (9 inch in F100) Question 1? Is there any diffrence other than 40.00 between a Ford Racing and a Summit Detroit Locker? :shrug: Question 2? Which would be better, a True trac (Torque Biasing, Limited Slip) or the Detroit. They are...
  16. PoliceInterceptor

    Paint Emergency

    http://www.ppg.com/cr-refinish/phase1/frmSelectDefectGroup.asp
  17. PoliceInterceptor

    Air Compressor Talk

    I have the craftsman that you linked to (less the tools) It runs impacts and air ratchets fine. Runs an air drill with no major problems, you just have to stop occasionally, not a problem unless you plan to drill lots of big holes in heavy stuff. It also runs a detail gun fine. I think...
  18. PoliceInterceptor

    Opinions on a carb

    Of your two choices I'd go with the Road Demon. The 570 SA that was suggested is also a really nice carb.
  19. PoliceInterceptor

    Por 15 ?

    You can spray it. Read all about it at: http://www.por15.com/ It is good stuff.
  20. PoliceInterceptor

    Cam combo

    Back on subject..... Well, Bullit, to answer your question. If there were piston to valve interference, you would have to either go to a smaller cam, of cut valve relief in the pistons. There are cutters that replace the valve and allow you to do this. Obviously, you have to pull the...
View older results
Top Bottom
Back
Forums
Menu