Search results

  1. NOSNotch

    Wiring experts please help

    Me and my buddy bout to pull our hair out tryin to get his blinkers working in his 87. The flashers work and it has power going into the turn signal switch but no turn signals. Have replaced the dash and headlight harnesses, a couple t/s switches, hazard switch, relays and checked all fuses and...
  2. NOSNotch

    car is missing/sputtering ANY HELP NEEDED

    if the problem started when you changed the plugs i would try closing your gap down to .035 Also it could be possible if the porcelin cracked on one of the plugs during install that would give you a miss or if maybe you dropped a plug it could close the gap up and same problem. Good luck with it
  3. NOSNotch

    car is missing/sputtering ANY HELP NEEDED

    whats your timing set at? How old are the plug wires? What kinda shape is the cap and rotor in? How old are the plugs in it?
  4. NOSNotch

    autometer light

    Just had to order one the other day. This should be what ur lookin for http://store.summitracing.com/default.asp?target=esearch.asp&N=100&Ntk=PartSearch&Ntt=atm-3211
  5. NOSNotch

    Throttle Cable Adjustment

    You could take the cable off of the bracket and put some spacers/washers between the bracket and the cable I guess and use a longer bolt but it might just be easier to order a new cable from 50resto or something. Good luck with it Kevin
  6. NOSNotch

    Flywheel removal

    have a buddy get a socket and breaker bar or ratchet to hold the crank up at the front while you break the bolts loose. If you dont have a friend around to do it for ya you can use the socket and breaker bar and get a pipe or something on the end that will wedge against the ground while your...
  7. NOSNotch

    External coolant leak

    I would definitely run down to the local parts store and rent a coolant system pressure tester if you cant pinpoint where the leaks comin from. You didnt really say where exactly your seeing the coolant run down other than the pass. side head so just a couple options; black heater tube that runs...
  8. NOSNotch

    Please HELP with Spring Re-install..

    if 505's idea dont work; i would run the compressor in the spring (assuming its the one that goes up thru the middle) and compress the spring down, then get a good thick linked chain and run it up thru the middle and then come out of the links closest to each end as you can go and put a good...
  9. NOSNotch

    Whos using Ramcharger dual fans?

    Im gonna sell my mark VII fan b/c i cant trim it enough to make it work with my new Afco rad and I dont wanna put the rad in the condensor mounts so after searchin i think i'm gonna go with the ramchargers dual fan setup for $140. Just wonderin to anyone that installed em on an aftermarket rad...
  10. NOSNotch

    Front springs from what year 4 cilynder fox body

    i got a set outta my 93 coupe. They work good as a cheap drag spring. I just put eibach drags in mine, if your interested in em shoot me a pm Kevin
  11. NOSNotch

    To anyone with an Afco...What fan are you runnin??

    I got my new 306 up and runnin tonite and i had a mark Viii fan with my old setup and stock radiator but there is no way it's gonna fit with my new Afco. I was thinking of looking into the RamChargers dual fan setup but I'm not sure if I'll have clearance with that setup either. So to anyone...
  12. NOSNotch

    Markin the dipstick...

    well i cant go off the full line of the dipstick b/c it's a universal stick for canton pans and it's different between motors i'm assumin. since it's advertised as a 7qt pan thats why i was thinkin i could put 7qts in and mark the stick. Thanks guys Kevin
  13. NOSNotch

    Markin the dipstick...

    i've gotta canton 7qt pan on my new 306, i gotta mark the dipstick for full but just wanna make sure i got the right idea first. Figure I'd put 7qts in it and mark the stick before starting it. Is this the way to do it or am i missin somethin here? Thanks for any help here guys Kevin
  14. NOSNotch

    3G Alt Install ?

    I've already got 4ga. wire for the post on the alt but I've been told that I dont need to use a mega fuse and then told i do so can anyone clear it up for sure? Thanks in advance guys Kevin
  15. NOSNotch

    Where to hook up VOLTS gauge ...

    You can go off of anything really. In my coupe i hooked it right into the switched power wire of my radio and I get an accuracte reading checking it with a meter right off the battery. You should be good with that or any wire with key-on power Kevin
  16. NOSNotch

    Which master cylinder???

    I just put slotted MarkVii rotors and 73mm calipers on front of my coupe and once my rear is built up i plan on probably goin with rear disc as well. My question is what master cylinder should i use? I got an SVO one off the guy i got the rotors & calipers from but i'd rather use the newer style...
  17. NOSNotch

    Whos runnin ProStar skinnys?

    I've got Mark VII rotors and 73mm calipers on the front of my coupe and i was plannin on using ProStars as track wheels and my buddys 15x4s wont clear the caliper. Just wondering if anyone is using ProStars after a 5 lug swap and if you had to use spacers or not. Thanks Kevin
  18. NOSNotch

    Any pics of Saleen wheels on a Fox?

    I'm thinkin about gettin a set of 17x9 Saleen replicas for my silver coupe just tryin to get an idea of how they'd look. Thanks in advance for any help Kevin
  19. NOSNotch

    Rim suggestions

    Swappin my stuff to 5 lug and need to decide on wheels since my ProStars wont clear the Mark Vii calipers to bolt up. Just lookin for some opinions on what looks decent other than cobras and bullitts. Goin on a silver coupe.... Kevin
  20. NOSNotch

    Wheels for Mark VII 5 lug???

    I'm in the process of puttin 5 lug mark Vii stuff up front on my coupe and after tryin the other day to bolt my 15x4 ProStars to my buddys car with the same setup i realize they wont work. I'm not really tryin to run spacers and dont want a huge wheel. What could you guys recommend or whats the...
Top Bottom
Back
Forums
Menu