Search results

  1. P

    pyrometer gauge

    hi, I've receive a autometer Pyrometer gauge and... honestly i don't know how to read it... I know it's used to give what is the exhaust temp but... what's that mean? How I can interpret the reading? what's good and what's bad ? Can someone help me a little bit ? Thanks !
  2. P

    T-5 in a 98GT

    what about the TKO 500/600 ? any feedback? ease of installation, durability , etc...?
  3. P

    T-5 in a 98GT

    Or I should use my old t-45 for a while and then get a tko-500 or t56 ? the tko-500 is a direct replacement? thanks
  4. P

    T-5 in a 98GT

    Alright ! Thanks Do you know if the T-5 is as "good" as the T-45 ?
  5. P

    T-5 in a 98GT

    Right now the T-5 is bolted on my 5.4L 32v. I'm planning to install the engine in my 98GT and I want to know if I also install the T-5. Anyone have already done it, installing a T-5 in a sn95 body? is it alot of trouble or it's a direct replacement ? Thanks
  6. P

    T-5 in a 98GT

    Hi, can I put a T-5 in a 98GT ? If yes, is it alot of trouble to install it? Thanks
  7. P

    Post your badass burnout!

    http://www.youtube.com/v/W6uXSRnQXKw That's me with my GT :) Doing more smoke than my bro KFX450R :)
  8. P

    Nitrous..yay or nay?

    I've purchased a Zex wet kit for my 98GT and It's really easy to install. DON'T buy the Zex bottle heater... it's not the best heater... it's really slow to heat the bottle ! You won't regret the hit at 3000 RPM :) Be sure to have a windows switch and pressure gauge on the bottle too...
  9. P

    5.4-4v Navigator engine swap?!?

    I've already the 97 Cobra intake it's complete from air filter to oil pan ... :)
  10. P

    5.4-4v Navigator engine swap?!?

    Hi, I've had a very nice deal on a 5.4 $V and I want to know if I can keep my wiring from a 98 4.6 2V Thank you very much !
  11. P

    5.4L 4V swap

    Hi, I've had a nice deal on a forged 5.4L 4V . It's complet from the air filter to the oil pan. I want to know if I can keep my computer wiring and ECU(from a 98 GT 5spd) and be able to tune it just like my old 4.6L 2V. I also want to know if the motor mount will be the same ? Thanks
  12. P

    First oil change, what to use?

    Hi, I don't want to steal your thread but I want to know if I swap my heads and I replace head gaskets, I will be good to use syn right? I 'm using Quaker State oil and so far it's ok., but I want to know if I can switch to syn after my PI swap. Thanks
  13. P

    Lean ??

    Hi, I've plugged my wideband on the driver side exhaust and the reading is around 15.5 - 14.5 at idle, 15.0 14.3 acceleration and 14.7 13.5 at wot I've a mac prochamber and no muffler... I've read somewhere that a no muffler setup can cause a lean reading but is it true? Should I buy a set of...
  14. P

    Help me with Cams

    Hi, I'm planning to purchase Patriot stage 2 heads and I'm still not sure what cams to order. The Patriot Performance Modular Ford Billet 233/237 .545"/.550" 113 lsa or The Comp Cam XE274H ? Also, should Ii buy a adjustable cams gear or I can stick with OE cams gear ? Thanks
  15. P

    P.I. Heads

    Hi, I want to get PI heads but I'm not sure where to start looking at ... I'm planning to get Cams and PI heads in same time. What I need ? Stage 2 from Patriot or FRPP High Perf. PI Head (not the production one) with which cams ? Do I need cam gear ? I need spring ? I need new set of valve...
  16. P

    pi cams on NPI heads

    I've done the Cams/intake swap myself , and i'm not that good in mecanic, I really appreciate the result. It's not that hard to do. Get the Cam Removal tool from Anderson Ford Motorsport it's a huge time saver and it's really not expensive. Good luck with your swap, you won't regret it !
  17. P

    Going Forged

    I need some advice to choose the right pistons and beams to get forged... From what I've read, the stock piston is 3.5460 stroke and some forged pistons i've seen on the web is a bit smaller (3.543) Can I use it ? And I've also noticed that some kit speak of cc (5cc, 10cc, 18cc, etc...) What's...
  18. P

    Going Forged

    Nice, thank you very much ! I'll give them a call !
  19. P

    Going Forged

    I'm looking for Plate system... Anyone tried it ? So with forged piston (incl. ring), stud and I or H beams, I should be good ?
  20. P

    Going Forged

    Hi, I'm looking to get forged piston, maybe from DSS Racing or Probe. Any other suggestion? I want to use nitrous, maybe 125hp shot or 150hp ... I need forged piston, H or I beam, can I stick with stock crank ? What else do I need ? Thanks
Top Bottom
Back
Forums
Menu