Search results

  1. zm830101

    Starter Stays engaged

    that will be fifty bucks for the diagnosis:flag: i accept paypal :)
  2. zm830101

    Starter Stays engaged

    i bypassed a neutral safety switch once. starter did the same thing. needless to say, i had bypassed the switch incorrectly. put the switch back in the system and viola...problem solved:)
  3. zm830101

    620 drop coils and alignment

    well, it had newish stock height 620's in it when it was aligned just recently. i also have a set of 1" lower 620's that i am considering throwing in. will it affect the alignment negatively enough to warrant not doing the swap or should i just rock it as is with the new springs? will camber be...
  4. zm830101

    620 drop coils and alignment

    care to elaborate?
  5. zm830101

    620 drop coils and alignment

    will the 1" drop 620 coils change the alignment at all?
  6. zm830101

    c code 289 fueling troubles

    whoops, i meant to post in the tech section. mods, please feel free to lock and/or move this post
  7. zm830101

    c code 289 fueling troubles

    idles perfectly at about 720. full advance is in by about 1300. pulls about 15 psi vacuum. i adjusted the curb idle screws with the vacuum gauge. turned them out to max vacuum and then backed them off just a hair. problem is when i stab the throttle from idle. bogs momentarily and then revs just...
  8. zm830101

    1966 T5 Vibration Issue

    i am on a lot of fox body forums, and many of them complain about a natural harmonic that the t5 has. you can feel it in the shifter handle on most foxes but not the chassis. maybe it is something about the older chassis that transfers that harmonic to the chassis more than hte foxes?
  9. zm830101

    just put in some HID's

    most oem hid set ups have a "cut off" shield that prevents light from scattering upward(into the eyes of on coming drivers). on many vehicles it is actually motorized most however it is fixed.
  10. zm830101

    66 Steering Box Removal

    unbolt driver's side motor mount. jack up just that side of the motor. remove steering box. done. don't waste your time fussing with the column. there is no reason to
  11. zm830101

    Cleveland Aussie vs. Edelbrock

    trick flow is releasing (or has just released) some cleveland heads as well
  12. zm830101

    Cable Clutch Conversion

    mustang steve user here. i like mine and have had no trouble with it since the install. install was a little difficult in my case. for whatever reason i had to mill a small amount off of the adjuster block. and then there was the "clearancing" of the cowl floor. wasn't really an issue just took...
  13. zm830101

    Need help with 66 steering column.

    if i remember correctly, the shaft is 43 inches from the wheel splines to the steering box
  14. zm830101

    Need help with 66 steering column.

    the box and shaft on a '66 are integrated. you want a shaft you have to get a box as far as i know. '67 are a different story
  15. zm830101

    Fast XFI fuel injection

    any of you guys/gals using it? what are your experiences as far as ease of set up, maintenance, tuning? any got ya's to look out for?
  16. zm830101

    anyone know what would be needed to use a GM T56?

    i have been considering using a camaro 6 speed myself. i found this thread over at corral VERY helpful. it discusses a lot of the interchangeability issues between the different boxes even though it focuses mostly on the newer tr-6060. Swapping in TR-6060 for a T-56? - Corral Forums
  17. zm830101

    3 angle valve job question

    while i agree it is less than ideal, saying it is the wrong way to do it is, well, wrong :) that is what bugged me about the statement.
  18. zm830101

    3 angle valve job question

    huh? if it is so wrong why have we been doing it for oh 60 years or so? qualify that statement PLEASE!
  19. zm830101

    Have a good one!

    i don't post here often so i will preface this statement by saying i have no prior knowledge to the situation that must have inspired this steaming pile of thread in the first place. i sually just keep the search function warm at night. but i wish threads like this one would just get deleted...
  20. zm830101

    rear suspension options

    got any pics of the install?
Top Bottom
Back
Forums
Menu