Search results

  1. Markus

    67 fastback restomod project

    Hello @all, 65 fastback vielen Dank = thank´s for the flowers:) mustbereel My english is not much better than your german:rlaugh: My complete webpage you can find at www.mustang1967.de There are alot of pictures from the car. The car is complete restored. From outside it looks very...
  2. Markus

    67 fastback restomod project

    Hello guys, what do think about my 67 fastback restomod projekt? 331 stroker (roller) with EFI, AFR 185 heads, FTI custom cam, 10.7:1 compression ratio, cold air induction, Hooker comp. long tube headers, off road h-pipe, Tremec TKO and 8.8 rear with 3.55:1 ratio…………………..and so on...
  3. Markus

    AFR 165 heads, but what valve springs?

    Hello, yes, i think also that Ed is a busy man. He is "THE" man in facto custom cam and valve train.:nice: The PS3 spring kit is the right one for your application. Max lift .600, 135 pound closed pressure @ 1.830 - 1.845, OD 1.450. I use this spring kit with a roller custom cam from Ed...
  4. Markus

    AFR 165 heads, but what valve springs?

    Hello, call Ed Curtis (FTI), he sell a "drop in" spring kit for the AFR´s. No machining needed. I use them too in my AFR185. Markus
  5. Markus

    help with dynamic compression ratio

    thank´s for input, i calculate it with a calculator i found in the internet. Please look at the link. Here is a pdf file with my computation. What do you mean? thank you http://212.227.100.192/mustang/dcr.pdf
  6. Markus

    help with dynamic compression ratio

    Hello guys, i need help to calculate my (real) dcr. I hope you specialists can help me. Ok, we start with the engine facts: bore: 4.03 stroke: 3.25 rod: 5.4 head cc: 61 piston: flat top 4cc reliefs gasket: 4.1 bore, 0.039 c. thickness piston: 0.02 above deck cam...
  7. Markus

    ground wire question

    Hello, can i attach the main ground wire (direct from battery) on my aluminium cylinder heads or must i fix it on the block? Thank´s for input.... Markus
  8. Markus

    Which oil pan for DSS Main Support?

    Hi, the pan is from Mustangs Unlimited, here is the link: http://www.mustangsunlimited.com/itemdy01.asp?T1=S1MS6675A+01&Category=Engine&subCategory=Oil+Pans&CatKey=EMUSTANG I polished the oil pan to this shiny finish. The cross member is no problem, there is a lot of room. The paint is a...
  9. Markus

    Which oil pan for DSS Main Support?

    I use this cobra lettered pan, but i have a trickflow girdle with ARP bolts.
  10. Markus

    EFI intake hose interference

    Hi, here another idea to route the intake tube. I use no EGR and a custom cold air intake. Markus
  11. Markus

    Accel vs. FRPP injectors

    Hello guys, i need some opinions. I would like to buy a set of 24 pound injectors for my new stroker. But i´m not sure Accel or Ford racing injectors. Are the FRPP´s better ? On the other side the Accel´s are cheaper. What do you mean? Markus
  12. Markus

    My 8.8 project finished

    Hello, very nice !!!! And another 8.8 with a 3.55:1 gear in my 67 Mustang. Markus
  13. Markus

    Engine question...tech guys come on in.

    Hi, same clearance problem in my 67 Mustang. I use a K&N HP-2004 filter. Markus
  14. Markus

    TKO 500 in a classic

    Hi, i cut a "little" hole in my tranny tunnel to get the right driveline angle. Not a big deal. But a pain in my heart :shock: Markus
  15. Markus

    problem or not

    Hello guys, today i installed my roller rockers on my AFR185. Three roller rockers did not sitting exactly on the valve tip. What do you think? Is this within the tolerance? Please look the picture. thank´s Markus http://www.mustang1967.de/bilder/rr.JPG
  16. Markus

    jmc hydraulic clutch

    @all thank´s for reply. Hello, which diameter does the Bendix OEM booster have? Markus
  17. Markus

    8.8 fitment in 66?

    Hello, i use a 8.8 out from a 89GT fox in my 67. I use a 1 inch spacer with my 8 inch magnum 500 on the rear. I think the 8.8 will fit on your 66 without modification. Markus
  18. Markus

    jmc hydraulic clutch

    hello guys, i need help to convert my clutch linkage from manual to hydraulic. I use a fox body (89) brake booster. Will the JMC hydraulic clutch conversion fit? The actual clutch linkage is a cable. But my hooker competition headers melt this one. So i will change to hydraulic. Markus
  19. Markus

    Upside down Mass Air???????

    Hello, ...or build a cold air induction like i did. Before this my filter was also in the engine compartment and the power output of the engine on hot days was very bad. Markus
  20. Markus

    billet steel timing set or not?

    Hello, do i need a billet steel timing set or can i use a cast one? I don´t rev the engine past 6000 rpm. thank´s Markus
View older results
Top Bottom
Back
Forums
Menu