Search results

  1. Markus

    professional photo shoot with my 67 fastback

    Hello guys, i must show you the best photos i have ever seen from my 67 fastback. A american guy here in germany shoot my car. He made 260 photos. A few you can see in the following photo slide show. 67 fastback slide show Thank you for looking :nice: Markus
  2. Markus

    67 Autometer project completed

    Hi, the gauge support is from mustangs unlimited. gauge support It is listed for two 3 3/8 inch gauges but it is for two 5 inch. And yes, the mods on the new gauge cluster is a pain :eek: The 5 inch instruments fit perfectly, but the little holes are made for the 2 1/16 instruments. So i...
  3. Markus

    67 Autometer project completed

    Here a few pictures of my autometer conversion with custom wiring...... Autometer gauge cluster
  4. Markus

    WOT voltage issue

    Hello guys, my car run´s at wot too lean since 2 weeks or so. Yesterday i logged the data with my tweecer rt and i saw that my voltage dropped the higher the engine rpm is. At idle with lights on 13.6 v at 1500 rpm 13.5 v at 2000 rpm 13.2 v at 3000 rpm 13.2 v at 4000 rpm 13 v at 4500 rpm 12.8...
  5. Markus

    Electric Fan Spal Controller???

    I use a spal fan pwm also, but with a 11 inch dual spal fan (2 x 30 amp). 60 amps are a way too much for a single fan on this controller. :nono: Two choices: other fan or other controller :shrug: good luck Markus
  6. Markus

    Aluminum Radiator/Fan CFM Question

    You can also put a stainless spring in your lower hose. Than you can bend it a little more without flatten the hose. :nice: Markus
  7. Markus

    Need a new Radiator. Which one?

    Here a some pics of the installed radiator....
  8. Markus

    did a reverse to standard water pump swap, now having cooling issues?

    flip down your alternator like mine and you have enough belt tension. Or use a ribbed wp pulley. :nice:
  9. Markus

    did a reverse to standard water pump swap, now having cooling issues?

    I would say, this is a counterclockwise turning pump. Summit say "standard rotating". And standard rotating for that year of mustangs is "counterclockwise" Is that possible :shrug: Markus
  10. Markus

    Need a new Radiator. Which one?

    Hello, i run the mishimoto also. Very nice piece. It cools perfectly my 331 in conjunction with a dual spal fan assembly.
  11. Markus

    Why do i keep breaking pushrods?!!

    No, i don´t break a push rod but i bend two of it.:notnice: I rasp it down above the "k" from "i s k i" with a simple round file. The guide plate is very hard but it works:nice: You can also use a drill with a grinding stone. Markus
  12. Markus

    Why do i keep breaking pushrods?!!

    Do your push rods rub on the guide plates? The adjustable guide plates from isky are not for ford heads. The slots are not deep enough!:nono: I run in the same issue with my afr185 and isky guide plates. You must grind the slots 2-3mm deeper. Here is my isky guide plate before i machined it...
  13. Markus

    Ford Explorer Upper Intake Stuck

    Bingo:nice: It is a ground.
  14. Markus

    Fuel Pump Mounting

    Hello, i use a facet red top pump. It is very quite too.
  15. Markus

    6 grove water pump pulley. what are my option?

    Hello, here is my setup........... march alternator bracket with tensioner (#30025) and a march wp pulley (#2004) Markus
  16. Markus

    how much bumpsteer is too much?

    Hi guys, thank you :nice: I check the bump steer almost to 3 inch compress and rebound. compressed suspension the bumpsteer is also near zero and @rebound i measured 0.3 inch bumpsteer. Markus
  17. Markus

    how much bumpsteer is too much?

    Hello guys, i installed today the tcp bump steer correction kit on my 67. I have checked the toe in and out with 2 inch compression and 2 inch rebound. Without spacer on the corrector i measured 0.3 inch toe in @ 2 inch compression and 0.55 inch toe out @ 2 inch rebound. With 0.75 spacer i...
  18. Markus

    EFI Surge (header tank) question

    Hello, i feed my 331 with a 60gph high pressure bosch pump. The "catch" tank is filled with a facet blue top 54gph. The fuel return line goes in the catch tank too. So is the the surge tank always full. Markus
  19. Markus

    331 with GT40 tubular

    Hello, anyone with a tubular gt40 intake on a n/a 331/347 ? What numbers are you make with your combo? My torque is fine but my hp´s are a little low. I think the flow through that intake is not big enough for a stroker. I know that other intakes make more hp @ higher rpms but my own red...
  20. Markus

    Electric Fan Options

    Hello guys, i needed better cooling for my 331 (5.0 roller base block) too. First i installed a 3g alternator and opened the radiator support for a 2 row mishimoto (fox style) aluminium radiator. Following a edelbrock victor water pump (clock wise) and a set dual spal fans. They controlled by...
Top Bottom
Back
Forums
Menu