Search results

  1. stroked 6t5

    1967 tilt steering

    Grant (masergt), Thanx for the PM. I did respond however since we are close geographically why don't you call me at the number I sent in the PM. It might be easier to understand things that way. Many thanx and look forward to hearing from you. Regards, Andy
  2. stroked 6t5

    1967 tilt steering

    To help with your questions; 1) All '67 thru '69 had a tilt/tilt away combination. There was a nine position tilt up and down and there was a tilt away feature that was electric over vacuum. That's why there was an additional door jamb switch on the left side simular to the one for courtesy...
  3. stroked 6t5

    1967 tilt steering

    HELP!!! WTB or TRADE? I have a 1967 tilt steering column that I'm going to install in my car. The problem is that at some time the upper collar was changed to a '68 version. I want to maintain my original wood wheel which causes the problem. The '67 version (which I need) has a rolled over edge...
  4. stroked 6t5

    wiring problem

    Hi all, Thanx for all your assistance and comments. As it turns out though it was a defective solenoid. All is well now. Regards, Andy
  5. stroked 6t5

    wiring problem

    Hi all, I have a problem that I hope someone can assist with. I’m trying to install a new universal wiring harness in my 65 while attempting to retain all switches and plugs for the original look. The problem I have is when I attempt to hook up the battery the car starts cracking over...
  6. stroked 6t5

    1968/69 mustang/cougar tilt steering colum

    Hello, I'm looking for a complete (or close) 1968 1969 (maybe even 67) Mustang cougar tilt/tilt away steering colum to adapt to my project. Does anyone out there have such a thing or any information on where to look? I'm wanting something that looks like original so I can use my original wood...
  7. stroked 6t5

    tilt steering for my 6T5

    Hi all, I've installed a Heidt's independent front suspension and manual rack & pinion on my stang however, I don't like where the steering wheel sits. I've looked at Flamming River and IDIDIT's offerings but they all seem to be geared towards GM's wiring and wheels. I want to keep my original...
  8. stroked 6t5

    powermaster 140a alt

    Hello all, I'm about to install one of the one wire high amp alternators in my '65. I was wondering if anyone out there could help with a step by step process or a list of dos and don'ts. Any assistance would be greatly appriciated. Regards, Andy
  9. stroked 6t5

    Hydraulic clutch in a 66 Fairlane - JMC?

    No need for drilling as you already have the factory hole that the pivot arm used. Since you don't need any of that mechanical stuff any longer you have lots of room to run the lines. Regards, Andy
  10. stroked 6t5

    Hydraulic clutch in a 66 Fairlane - JMC?

    The JMC kit that you have listed is the one you need. It's got a hydraulic throw out bearing so it doesn't matter at that point if you have a pusher or a puller set up as it alll fits inside the bellhousing. I've been through all this on my Mustang project and this is the way I finally ended up...
  11. stroked 6t5

    1965 grill ornament

    Hi all, I have been looking for the flamed pony grill ornament for my 6t5 for some time now. Year One used to sell it under part #FJ1371 but don't anymore (I think California Mustang did as well). Would anyone out there in Mustangland be able to steer me in a direction that would put one on the...
  12. stroked 6t5

    1965 clutch swap problems

    I had the same idea so I have looked at a 1985 f150 bellhousing with a hydraulic cylinder and it has a conflict with the headers
  13. stroked 6t5

    Anybody make their own hyrdraulic clutch?

    Has anyone done a successful hydraulic swap using the original bellhousing?
  14. stroked 6t5

    1965 clutch swap problems

    Thanx for all the info. The reason I'm going with the larger clutch is on the advise of my engine builder. Since I have a stroker making loads of torque he recomends going larger. It all fits in the bellhousing fine it's just the hydraulics I'm Having problems with. I may have to step up and...
  15. stroked 6t5

    1965 clutch swap problems

    Hi all, I have a problem I hope someone out there can help with. I’m in the middle of a T5 swap with hydraulic clutch in my 65 stang sporting a 351w. I’m using the original bellhousing with T5 swap spacer, 14.25” flywheel with 164 teeth and a Centreforce clutch setup and a T5 clutch fork. I’ve...
  16. stroked 6t5

    painless wiring

    Hi all, What are the pros and cons to this wiring system? Is it really painless? Will it handle all the electrical goodies of this decade as well as all the standard stuff of a 1965 deluxe GT (rally-pac, fog lites etc...)? Regards, Andy
  17. stroked 6t5

    cooling down the beast

    Hi all, You've been very helpful so far. I have a question regarding cooling down my 408 stroker. It tends to run a bit hot so I've decided to switch to an electric waterpump, fan and aluminum radiator. Does anyone have any recommendations as to which one works best and is the easiest to...
  18. stroked 6t5

    Help

    :shrug: HELP!!! I'm looking for a couple of items I hope someone, anyone can help me with. 1) A drop base air cleaner. I'm hoping to fit my 351w stroked to 408 under my stock hood. I've heard of these drop base air cleaners but haven't been able to find one. 2) I'm looking for a complete...
Top Bottom
Back
Forums
Menu