Search results

  1. B

    1987 mustang gt 5 speed

    The title says 1986 but it is not a 4 eye. I just got the motor running great! It hase new intake gaskets, i put all new inj. o-rings,computer, new rad. with electric fan,has all new brakes, rotors,pads,lines,and master cyl. I have $1060.24 in just parts into this car with recipets.Now for the...
  2. B

    Smoking Brakes.

  3. B

    Smoking Brakes.

  4. B

    Smoking Brakes.

    no the pedal does not get rock hard. It gets a little stiffer but it doesnt get rock hard. It is just the front brakes. edit: What i did when i took it for a drive is exactly what it says to on the link. I didnt know how to do it but i did exactly what they are saying to do. So i guess...
  5. B

    Smoking Brakes.

    i drove it around town for a while before i hit them hard.
  6. B

    Smoking Brakes.

    Stock brakes. The brakes feel kinda weird. it goes about 1/4 pedal before there is any brakes. I bleed the brakes with a vac pump and the old way just to make sure.
  7. B

    Smoking Brakes.

    Ok so i was "Testing" the stang and hit the brakes at about 90 and they faded VERY fast and actually couldnt make my turn and had to go down the road to turn around. So i got new rotors,hoses,and brakes. Put it all together and the brakes fade very fast, within about 2 sec when you stand on the...
  8. B

    Another Clutch Cable Problem

    it looked the same.
  9. B

    Another Clutch Cable Problem

    It is a dorman fork,oreilly fly and clutch,also the best TOB they have and a steel bearing retainer from Hanlon Ms. Posted via Mobile Device
  10. B

    Another Clutch Cable Problem

    Its not the car. It has new flywheel,clutch,TOB,fork,steel retainer,new tranny.
  11. B

    Clutch Problem? Or Synchro Problem?

    Its the synchros. It would do it in every gear if it was the clutch. I would pull the tranny and do it now before you have to pay $100 for a 3rd gear.
  12. B

    Another Clutch Cable Problem

    ok well it didnt go very good.. I ended up having to put a 1 1/4" spacer between the cable and the fire wall adj and screw it most of the way out. It is working but im not very happy with having to do that. It is the ezest clutch i have ever pushed tho.
  13. B

    Another Clutch Cable Problem

    ok man thanks im going to start putting it back together. This cable is the **** by the way :) love it.
  14. B

    Another Clutch Cable Problem

    Ok so i got the new MM clutch cable kit (comes with everything) and the firewall adjuster is almost screwed all the way out?????? The pedal pushes SUPER EZ :D its like pushing on a stiff gas pedal lol. The tanny is just hanging on the bell housing b/c i wanted to make sure everything was...
  15. B

    84 5.0 runs when it feels like it??

    What kind of carb? Im guessing you have a electric fuel pump, how much PSI is it pushing? How do the plugs look when it wont start? Wet? smell like gas? Have you tried starter fluid? The carb could be leaking gas into the engine and flooding it out??? Not to be a smart ass but are you...
  16. B

    89' e303...hard intake backfire

    pressure should not drop below 33 (vac installed) regardless if the engine is running or not. Sounds like the fuel pump isn't pumping out anymore than a 90 year old man.
  17. B

    Head Gasket replacement info

    It costs a lot more than you think it will. Im guessing a $200 bill might do it if you dont go to the machine shop. I pulled the intake off my 5.0 and it aint no chevy...... For all the gaskets,cleaner,O-Rings,and a few tools that i didnt have, it was around $150 and a FULL day of work.
  18. B

    Another Clutch Cable Problem

    It has to be the cable. I stuck the tranny in got the fork set up, and still had a stiff ass pedal. So i pulled the tranny and left the fork on the cable with tension on the fork and everything was were it was supposed to be. So im going with the cable. PS: I will have a spare cable up for...
  19. B

    Another Clutch Cable Problem

    I got it coming. I will post how it works out.
  20. B

    Another Clutch Cable Problem

    Thanks green. Im going to order it this week. Were do you guys run your cable? I have mine running infront of the oil filter and under the motor mount.
Top Bottom
Back
Forums
Menu