Search results

  1. lazerred02

    Car Stereo was stolen last night

    Few pictures:(
  2. lazerred02

    Car Stereo was stolen last night

    It was a Pioneer In Dash DVD Unit with a 7" screen. Looks like they got the door open by pushing a hanger through the passenger side window (a hole in the window seal now) to unlock the door. They broke the mount the radio is held in by, t/c switch, defrost switch, fog light switch, and also the...
  3. lazerred02

    Installed PI intake...now have bad miss

    I have seen stranger things happen, once it is driven it may start to throw some codes.
  4. lazerred02

    Installed PI intake...now have bad miss

    Did you try unpluging each injector one at a time to see if it runs differently or stays the same? Do the same with the spark plugs, just make sure that you use some well insulated spark plug wire pliers so you don't get knocked on your tail.
  5. lazerred02

    ball joint and lower control arm question

    You need to hit the control arm pretty good, I normally use a 3lb hammer when doing this type of thing.
  6. lazerred02

    Diablo Tuner Question

    Exactly, it really does not matter which one that you have. Just get whichever one your tuner uses.
  7. lazerred02

    Diablo Tuner Question

    You got dyno sheets to prove this? Besides tuners are used for a lot of other purposes, O2, EGR, Gears etc.
  8. lazerred02

    Diablo Tuner Question

    You have to plug it into your car just to get it to power on to check if it is married to a vehicle already unless you have the ac power adapter for it then you can check it inside the house.
  9. lazerred02

    stopping cranksaft from turning 4r70w. ideas?

    Air tools are the easiest way but also just using a prybar to hold the TC is a ok option too.
  10. lazerred02

    How do you remove a broken bolt out of manifold?

    If you still can not get it out with the drill/extractor, I would just pull the intake. It is not that hard to do and that way you will be able to get down to the stud and be able to grip it with vise grips or a good stud remover like these... General Service, Stud Removers/Nut Splitters...
  11. lazerred02

    01 bowtie S10

    You can do the balljoints yourself, not too hard for the average guy to pull off.
  12. lazerred02

    RWHP w/ Mac Lt's and Prochamber Midpipe

    You must be new to these 4.6 engines, search for guys running 12's N/A with not much more than tubular K member, full exhaust and gears.
  13. lazerred02

    Wider tires = best bang for the buck

    Yeah 245 is stock width, so I bet 275 make a huge difference over 235's.
  14. lazerred02

    Question regarding catted "X" pipes?

    Some people are lucky and don't need MIL eliminators, unfortunately for me when I had my catted x-pipe I did need to use them to get the CEL off. But I really suggest just getting a tuner to turn off the rear O2's since you will most likely be wanting one in the future anyways plus you can do...
  15. lazerred02

    big upgrades

    Tork Tech's kit does really seem to be impressive and it looks good too.
  16. lazerred02

    CALIFORNIA SMOG WITH DIABLO TUNER

    Man I am so glad that I do not have to deal with all of that smog testing. How much do you guys have to pay to get it tested? If you fail then go back do you have to pay again?
  17. lazerred02

    :)

    Yeah when I first got my drivers permit my dad had a 94 GT and a 90 Corvette, I drove both but really loved the GT so once I got a good paying job I bought one and have not looked back since.
  18. lazerred02

    spoiler question

    They will probally just have to repaint the whole decklid to get it right. Why not just let the paint shop prep the skirts? It will cost a little more money but while your already getting everything else done it won't be a huge difference in price.
  19. lazerred02

    spoiler question

    I second the wingless look going great with really low cars and deep dishes, if you don't have that look already might as well leave the wing on. Also on the 99 and 00 wings I thought the holes were right in line with the trunk edge, so if they were left unfilled water would not be going...
  20. lazerred02

    03 Cobra pwnds new GTR

    Both are really cool cars, but if they were both put in front of me and I could have only one I choose the Cobra.
Top Bottom
Back
Forums
Menu