Search results

  1. baldy1

    Replacing a Auto trans with a T5 Manual

    Its not the trans thats a piece its the builder that did it You have to change your pedal assembly when you do change the stock quadrant to aftermarket. Summitt has a kit for it. I beleive cable and quadrant. Get pedal assembly from a junk yard. You can keep the same computer. Need a flywheel...
  2. baldy1

    AOD Torque Converter

    I did notice that today. I looked in my converter books for a converter and it was for an AOD and it said lock up. Dont why I never noticed that before. O well I know now
  3. baldy1

    Knock/Tap sound from transmission

    does the noise go away when you press on the clutch pedal
  4. baldy1

    1993 LX 5.0 Spark plug wire?

    Was it a good light show. Did you see a lot of pretty colors.LOL. Your plug wires are no good get some new ones man.
  5. baldy1

    Stang wont start

    follow jrichkers checklist for your issue
  6. baldy1

    AOD Torque Converter

    I have argued with a few people here about an AOD torque converter having lock up. I have been saying that they don't have lock up. The reason why I have said this is because if you look at a hydrualic chart for an AOD there is nothing there for lock up. Also we all know that an AOD is not...
  7. baldy1

    AOD Rebuild

    Use the 4r70w gear train. The stamped steel direct drum. Get a hardened imput shaft. get a good converter from precision.Get some good clutches. Raybestos are good. Not sure if they have the z pack for the AOD yet. They are great clutches. Good luck. Clean the VB real good because they do give...
  8. baldy1

    car starts but dies right away

    Jrichker said it better than me. I knew the ECT had nothing to to with the temp guage. I should of explain it better.Thats why you are stangnets favorite tool.
  9. baldy1

    car starts but dies right away

    Code 21 is Engine coolant temp sensor out of range Code 23 is TPS out of range or set to high Code 24 is Intake air temp sensor out of range http://www.veryuseful.com/mustang/tech/engine/images/88-91_5.0_EEC_Wiring_Diagram.gif The tps is most likely bad That would cause your car not run...
  10. baldy1

    Flywheel/Flexplate bolts

    Whar are you trying to do
  11. baldy1

    AOD trq converter ?

    Yes your are right to a point. I will post about it later in detail.
  12. baldy1

    shifting with out me

    Yeah for me
  13. baldy1

    AOD trq converter ?

    Sorry to say this fox but you are wrong. 4th gear in an AOD is the OD band and the intermediate clutches come on. Nothing to do with the converter. I am going to post info on the AOD. What comes on for what gear and hydraulic charts so I can prove to everyone that an AOD has no lock up. 3rd gear...
  14. baldy1

    5.0 Mustang with Electrica lShort (Help)

    what is the car doing need a little more info. year and stuff. Welcome to stangnet. This place is awsome:lol: :hail2: :SNSign:
  15. baldy1

    Drama with the repair shop...

    Either they didnt install the TOB on the fork the correct way or the front collar is worn on the trans or the pivot ball and or fork is bad and they missed it. Either one of those problems would cause your problems. Nothing else. Take it back to them and ask them. Luk clutches are very good...
  16. baldy1

    shifting with out me

    In a way it sounds like your shifter cable is not adjusted right. Jack your car up. Put your shifter in 1rst gear ( Not running of coarse). Get under your car and pop the cable off the shifter arm. Manually move the shifter arm all the to park and then back to 1rst gear and see if your cable...
  17. baldy1

    AOD trq converter ?

    No it will not work. I take it you got the shifter arm changed out. AODE is a lock up converter and an AOD HAS NO LOCK UP. I have argued with people up here about an AOD that it has no lock up. If you look at a hydraulic chart for an AOD it has no lock up. A lock up converter has a clutch in it...
  18. baldy1

    adjusting clutch cable. please help!!

    Pull up on the pedal. You said that you tried that and the pedal didnt do anything. It almost sounds like the plastic quadraint is broke or wore out. Summit sells a new quadrant. They also sell a firewall adjuster.
  19. baldy1

    help me repair my smog tube (picture)

    They make hose to repair smog pipes. Its green hose. Dont use heater hose. Go to your local parts store and ask for it tell them what you are doing and they should know. It green hose
  20. baldy1

    adjusting clutch cable. please help!!

    Double check your install. Make sure your cable is routed right and did you match the new cable up with the old one as far as length. Or they could of sold you the wrong one. Check to see if your self adjuster is not broke.
Top Bottom
Back
Forums
Menu