Search results

  1. T

    Couple pics of the stang

    Just got the Stang back on the road. Let me know what you think
  2. T

    No turn signals

    Hazards work. For some reason niether of my turn signals work. Anyone have a wiring diagram or point me in the right direction? I found the one that pins out the switch but where are the actual relays and where is the common point for both left and right? Thanks.
  3. T

    Rough Estimate On Horsepower?

    350whp is prob the most realistic
  4. T

    Should this be hooked up?

    ^you sure that's correct? When I pulled mine out of the fender the other end was hooked up to a mini box pump coming off the brake pedal. When you depress the pedal it would actuate a small plastic arm pumping air to that. Would make sense that it provided signal to disengage the CC.
  5. T

    An example of why selling a car is so difficult...

    2 problems you run into selling a car like this 1 - is since it is a swapped vehicle there is no real way to verify mileage, in all reality it could be a 160,000 mile engine 2 - swapped vehicle bring on all thier own problems, wiring etc, so anyone who is buying has to trust that it was a...
  6. T

    z06 burn out.

    How did no one stop him? All IDIOTS Even the guy with the camera was like, "right tire...no....left tire....no....hmm let me check the right tire again...." MORON!!
  7. T

    Here's exactly what my car needs to be up and running, but need advice.

    Man, really everything that is on your list is an easy DIY job. Just research and don't be intimidated. Be sure and give yourself plenty of time to get through it. The best part is, pretty much everything on your list is bolt on stuff so it either goes on or it doesn't....$1600 is crazy for...
  8. T

    How does the cluster's oil pressure gauge work?

    More than likely he removed the stock sending unit and is taking pressure from the same port directly on the right side of the timing cover you should see the line
  9. T

    my proline built shortblock combo...

    Obviously the injector sizing has nothing to do with the nitrous hit on a wet shot.
  10. T

    my proline built shortblock combo...

    what is the compression? Should get to where you want it. I would look into a custom ground cam though
  11. T

    Identify the Part!

    Let me know if I win :)
  12. T

    Broke T5

    Either have the T5 built or buy a Tremec
  13. T

    What's a normal operating temp for a mild 306?

    Here you go Here is the space between the IC and rad.
  14. T

    What's a normal operating temp for a mild 306?

    I don't have it either. I doubt you really need it with your setup but it can definately help with an undersized system. I took mine off back when I still had a 347 and didn't notice any effect. Maybe the fan ran a little more but....
  15. T

    NEW BBK CARB STYLE THROTTLE BODY

    Just guessing but you will prob need a carb throttle bracket along with the cable.
  16. T

    What's a normal operating temp for a mild 306?

    Scrapeguard is the black plastic thing that goes straight down about 3" or so at the radiator cross member. My cooling system is the same 3 row radiator that you have with a massive 4" intercooler with about a 4" gab between my radiator. I have an 18" slimline fan with a 5" downpipe about...
  17. T

    Identify the Part!

    Is it an input box for the wideband for datalogging? What wideband system?
  18. T

    ARP head stud torque

    Cool. This is for my turbo windsor but It's not going to be "high" boost. Thanks.
  19. T

    What's a normal operating temp for a mild 306?

    Not sure it's been said or not. But OTHER than getting a real gauge you can actually read a number value <-- priority one. Check to make sure you actually have a STANDARD rotation water pump on and not the REVERSE rotation pump since you said you replaced it recently. FYI I have that...
  20. T

    ARP head stud torque

    Looking for head stud torque specs for a 351w with aluminum heads, should they be the same for a stock motor?
Top Bottom
Back
Forums
Menu