Search results

  1. dcurtis

    steering column swap

    I thought there were some wires that needed to be switched around in the plugs also:shrug:
  2. dcurtis

    rear drum removal

    Same problem I had when I first bought my car, the shoes wore a lip in the rotor and refused to come off so I manually loosened the adjuster from the inside, and then beat it off. When you get it be sure to check for the lip because it will do that every time unless you install a new drum, which...
  3. dcurtis

    going to be putting a pretty big amp in my car...

    I would (and am) just replace your alternator to battery wire with at least 4 gauge, also do the engine to chassis and battery to chassis ground with 4 gauge wire, and run the red or yellow optima battery, I am picking up my yellow top tomorrow, or just find a good deep cycle battery, didn't see...
  4. dcurtis

    going to be putting a pretty big amp in my car...

    I would go for a second battery, capacitors are just bandaid fixes, there is still strain on your electrical system, battery and alternator, you just don't see it because the amp is pulling the stored power from the capacitor, I literally just read a write up from jl audio about using capacitors...
  5. dcurtis

    Supercharger hp question

    If your going supercharger I would recommend 3.42 or 3.73 over the 4.11's. You'll be out of gear when the charger gets happy.
  6. dcurtis

    Installing new door handles

    Yeah, I have already thought about just grabbing some nuts and bolts to install them, seems way easier, my headliner literally just got here a few minutes ago, lmr must be closer to me than I thought. so I am going to put that in here in a few minutes, their headliners look to be a pretty good...
  7. dcurtis

    Supercharger hp question

    I would guess around 370-375 if your at 300 now. Type of charger will make a good difference also, what type of charger are you planning to run?
  8. dcurtis

    Installing new door handles

    Yeah, it was my driver side that broke too, broke while I was going to get some lunch today at work, I have been expecting it for quite a while now, the stockers lasted longer than I thought:shrug:, going to get some new panel clips while I'm at it, my panel is kind of loose, also have to...
  9. dcurtis

    Installing new door handles

    Finally got around to getting some new metal door handles (mine broke today) all they come with is 4 rivets to install them, just wondering if there is anything else I will need to install them.
  10. dcurtis

    Peak HP with Track Heat Top End Kit

    peak hp should be between 290-310 to the wheels.
  11. dcurtis

    What is this called? 02 F150

    :lol:
  12. dcurtis

    What is this called? 02 F150

    mud flaps ain't gonna happen:nono:
  13. dcurtis

    head gasket question

    Agreed, the gasket has already been compressed. Once compressed you don't really need to re-use them, you (could) re-use it but you will not get as good of a seal as a new gasket will give.
  14. dcurtis

    '87 GT build

    How hard is it to pull the engine/tranny as one piece, any trouble spots that way, planning to pull mine in the next month or so, I have an aod tranny though. Nice progress.
  15. dcurtis

    What is this called? 02 F150

    Thanks for all the help:nice: :SNSign: For some reason, when I need a part I never think of the dealer:shrug:
  16. dcurtis

    What is this called? 02 F150

    Where can I get these at? Thanks for the help:nice:
  17. dcurtis

    Sweet car collection, almost all GM though

    Totally agree, no use having something if you don't use it, and the once a year ride is nowhere worth it for those cars, yeah there nice but not worth it to me, if they were mine I would truthfully sell almost all of them, and not even near the collector price at that. Would definitely have to...
  18. dcurtis

    What is this called? 02 F150

    Sorry, posted before I uploaded the pics to photobucket, here is the pic, all I can think of it being called is a chip guard but I can't find one anywhere on the internet. Will probably just hit up the jy for one. There is a little rust down there also but that can be taken care of fairly easy...
  19. dcurtis

    who makes the meaniest sounding exhaust? i already have...

    I say spintechs all the way:nice: Never liked mac at all.
  20. dcurtis

    What is this called? 02 F150

    I am looking at buying an 02 4X4 f150 regular cab, it is missing a piece of plastic on the bed and was wondering if any one here could tell me what it is called so I can order a replacement, if not I'm sure the junkyard will have one I could just pull off but would rather order a new one, it is...
Top Bottom
Back
Forums
Menu