Search results

  1. I

    why cant i burnout?!

    How wide are your wheels?
  2. I

    why cant i burnout?!

    That'll make it to where he's unable turn them over. :D
  3. I

    what heads for the $$$$

    Y303 heads flow roughly 20cfm or more than GT40 "P" heads and 25-30cfm more than the original GT40s. They're aluminum which reduces weight. This is even better on a Mustang due to their nose-heavy weight distribution. They flow about the same as a GT40 intake manifold making them a very good...
  4. I

    why cant i burnout?!

    Yes. So would not having enough power to spin the tires due to rotational mass would too.
  5. I

    why cant i burnout?!

    Yes, that's wheel hop, but you should still be able to burn out. What's your technique?
  6. I

    what heads for the $$$$

    I'd get a set of Y303 aluminum heads.
  7. I

    Carbon buildup

    How can I remove carbon from my head ports? The problem I'm having is they're already out of the car and off of the engine. Thanks.
  8. I

    ring gap questions

    Alright thanks.
  9. I

    ring gap questions

    Are the openings supposed to be placed on opposite sides of each other?
  10. I

    new spark plugs, what kind is best????

    Autolite. To be so cheap, their plugs run better than any other plugs I've seen. I'd stick with the 25s at .050"
  11. I

    ring gap questions

    How do you set ring gap? My shop teacher said they were preset. Also, how do you set the openings? The gaps of my 1st and 2nd were lined up like this: ____ ....... ____ and my oil rings looked like that or they were like this: ___ ___, with the expanding one in the middle. Hope...
  12. I

    My engine is officially toast, take a look..lots of pics

    Can't you take the crankshaft and have it ground down?
  13. I

    What to do?

    ttt, the heads will probably flow about the same as GT40/P heads.
  14. I

    Which heads out of these two......

    Definately get the Srs. then.
  15. I

    What to do?

    I've got the motor tore down in my car. Sure enough my bearings were bad in it. So, I'm going to be getting new bearings, rings, gaskets, springs, motor mounts, and a timing chain. After talking with someone tonight I'm curious as to whether I should go ahead and install a cam or not. Before...
  16. I

    Which heads out of these two......

    Windsor Jrs.
  17. I

    MT Drag radials

    Go with their 235/60s.
  18. I

    synthetic atf in a t-5?

    I think I misunderstood the question. I'd go synthetic.
  19. I

    Cam Question

    With stock heads I'd get the Bcam or Ecam, but I'm no expert.
  20. I

    The lowering spring survey!!

    Off of the list, I vote H&R Super Race.
Top Bottom
Back
Forums
Menu