Search results

  1. Green Machine

    Bad vibrations Clutch Problem ??? Long

    I took the car to a local tranny shop that I worked with previously. They said the same as you. It has a tiny amount of play, but it's ok for now. However, they said the the tranny was fine. On the way home it got 100 times worst. I made to my garage. The Ford tech saw how bad it was when he...
  2. Green Machine

    Bad vibrations Clutch Problem ??? Long

    Anyone ???
  3. Green Machine

    Bad vibrations Clutch Problem ??? Long

    Have a Ram HD clutch and Tremec 3550 tranny and Steeda short shifter. Less than 3 years on clutch and 2 years on tranny. No dumping of the clutch or power shifting. I've been good in babying it. Noticed this Sunday pulling out of the parking lot. Shortshifter and tranny had Way more than...
  4. Green Machine

    New AFS 10.5 Rims with Nitto Extreme 285's

    Methodical - Disc. Tires Direct has Nitto,BFG,Yoko's and other brands in the 315/35/17 size. Most are going to have a tireware of 100. Nitto only makes the drag radial in the 315 size. I wish they would make the 555 in the 315 size. That would be an awsome tire.:hail2:
  5. Green Machine

    New AFS 10.5 Rims with Nitto Extreme 285's

    White Devil - FMS Cobra R 17/9 rims on the front with 255/45/17 Nitto 555 extremes Suspect - The Nitto 315's only have a 100 tireware rating. I would have had to rearrange the drivers side exhaust to git it to fit. Plus, it rains alot here in Fla., and with my lead foot, i'd be in...
  6. Green Machine

    New AFS 10.5 Rims with Nitto Extreme 285's

    Got a super deal on a pair of AFS 10.5" rims on eBay then put some Nitto 555 285/40/17's from Discount Tire Direct . Nice firm ride, and no rubbing anywhere or removal of quads. I chose the 555 extremes so I could get the 300 tireware rating. :nice:
  7. Green Machine

    Wheel Center Cap removal

    Thanks guys, appreciate the info. I never paid attention to how the caps were attached. I'll be sure to have some glue ready for them. At $30 a pop don't want them going anywhere. Dewman :nice:
  8. Green Machine

    Wheel Center Cap removal

    How hard is it to remove the center cap from rims ? I know a dumb question, but I don't want to mess the rim up etc. Reason is, I got a sweet deal on eBay for a pair of silver AFS Cobra R 10.5 rims, and I want to take their snake off and put a genuine FMS Cobra R center cap in it's place...
  9. Green Machine

    Mequiars PLASTX plastic cleaner / polish

    94GTLaserRC - I found an old pic of the LH side tail, and you can see some of the oxidation. That shot was like 2 years ago, and they had gotten a lot worse since that photo was take. later, Dewman
  10. Green Machine

    Pro M 80mm - Worth it to replace C&L 76mm?

    I was able to call PMAS today, and spoke with one of there tech.'s I explained what I had in bolt on's etc. He was very confident that with my combo the Pro M 80mm would flow more air and most likely add 5 rwhp across the entire rpm range. So we'll see. I'll probably keep the C&L because...
  11. Green Machine

    Pro M 80mm - Worth it to replace C&L 76mm?

    That sounds like a good plan. :D I have a feeling that the Pro M would respond to a tune better than the C&L, given how the C&L fools the computer. Thanks Grady, I appreciate the input.
  12. Green Machine

    Pro M 80mm - Worth it to replace C&L 76mm?

    Ok, I've got a C&L 76mm MAF and inlet tube for 24lb injectors. Also have a Eldelbrock 70mm TB, see sig for more details. Last dyno run net'd ~270.99 / 305. That was with a A/F @ 13.8. Since then I've gotten a new AFPR and got the fuel pressure back down to 31 lbs. Would it be worth it...
  13. Green Machine

    Mequiars PLASTX plastic cleaner / polish

    WOW :hail2: This stuff works. My 94 GT had badly oxidized tail lights. I was even considering some 96-98 replacments, :notnice: I've tried Turtle wax rubbing compound and other plastic cleaner / wax products, but the Meguiars really works great !! Just a little elbow grease, and bam it's...
  14. Green Machine

    Dyno Time - Care to guestimate ?

    New Update Had the car dyno'd this a.m. Ended up with 270.99 / 305.01 at the rear wheels. Fuel pressure was at 33lbs. A/F was @ ~13.84. The best run last week was 272.99/304.28 with the A/R @ 15.2 with fuel pressure @ 31 lbs Prior to todays 1st run I had the fuel pressure @ 36lbs which...
  15. Green Machine

    Dyno Results - Lean fuel condition. Need Help

    Wow ! what a difference a few lbs of fuel pressure makes. This thing now pulls like crazy ! Heading back to the Dyno shop next Wed to see what the A/F is now at. I'll be able to adjust the fuel pressure after each run till I get the ratio back down to where it belongs. Thanks again...
  16. Green Machine

    Dyno Results - Lean fuel condition. Need Help

    Bumped up with vac hose off = 45lbs. vac hose on = 35lbs
  17. Green Machine

    Dyno Results - Lean fuel condition. Need Help

    Just finished road testing, and I can't get it to backfire anymore. hard downshift then left off gas :D The pressure guage showed 31lb's with vac hose attached, and 39lbs with out. I bumped the pressure up to 35lb and I it sure pulls harder, but the dyno will tell for sure.I'm going to...
  18. Green Machine

    Dyno Results - Lean fuel condition. Need Help

    I have a Kirban ? AFPR and it displays 32lbs when the motor is at idel etc. Timing was originally set @ 10* but we were able to get that bumped to 12* and the car has run much better. If I remember correctly to adj fuel pressure you need car running then un-do the vacumn hose from the fuel...
  19. Green Machine

    Dyno Results - Lean fuel condition. Need Help

    Nope, just remember what the guage was reading when @ motor is ideling. :D
  20. Green Machine

    Dyno Results - Lean fuel condition. Need Help

    Hey Grady, that would be a 1994 GT. A 255 Walbro fuel pump the back fire condition started about 3 weeks ago. Again no check engine light or anything. Thanks
Top Bottom
Back
Forums
Menu