Search results

  1. warriorpluto

    explorer intake vacuum line question

    oh ok so i can just substitute with vacuum trees? but it doesnt matter how its hooked up as long as all are hooked up to vacuum?
  2. warriorpluto

    explorer intake vacuum line question

    ok i have an explorer intake from a 2000. the upper and lower has egr luckily but when i got ready to install the upper i noticed i didnt have the little metal tree like the stock intake does at the underside of the upper intake. how do i go about hooking this up?
  3. warriorpluto

    87 mustang o2 harness

    ok thanks i just printed that out. thats all i wanted to know. i knew one was for the oil level and other was ground but didnt know which. so on the cut ground what kind of wire do i use to extend the ground to the lower intake? gonna try to get it cranked up today.
  4. warriorpluto

    2.3l 1v to 5.8l 4v

    or you could go to a c6(small block version) like my. got one from an 87 bronco. you just need to get aftermarket shifter and shorter driveshaft.
  5. warriorpluto

    87 mustang o2 harness

    was putting my harness back together(o2 sensor part of harness and i see two wires that are clipped. one is black and the other is kind of orange looking. how do i hook these back and where do they go?
  6. warriorpluto

    engine ground locations

    well i broke one ground that goes from the tranny to driverside firewall. putting my engine back together and just trying to make sure i have all grounds hooked up. and are there alternate places to put my grounds? this is my first engine build. need to know where ALL grounds go
  7. warriorpluto

    throttlebody and egr stud size?

    whats the stud size for the throttle body and egr on the stock mustang? im needing some studs for my explorer upper intake. the old studs wont come off the old intake. too rusty.
  8. warriorpluto

    5.0 Explorer EGR?

    it varies really cause i have a complete egr intake with my 2000 explorer motor. i was really surprised. only thing is it had the casting for the act sensor but i needed to get it drilled and tapped.
  9. warriorpluto

    High Torque Starters

    i just went with a 93 mustang mini starter.
  10. warriorpluto

    Does anyone know who makes short spark plugs?

    well is there a way i can just modify my headers for clearance?
  11. warriorpluto

    Does anyone know who makes short spark plugs?

    Ok I still have the insulating cover for the spark plugs. And the metal shield that goes around it. Would that work?
  12. warriorpluto

    Does anyone know who makes short spark plugs?

    ouch!!!! so what is the part number for accel short spark plug to use?
  13. warriorpluto

    Does anyone know who makes short spark plugs?

    yeah but would this work for me? can i get around this?
  14. warriorpluto

    cant get the damn fan off

    i used the pb blaster. the sucka wont come off. i wasted a whole day on that crap.
  15. warriorpluto

    cant get the damn fan off

    yeah i finally got around to tearing down that explorer engine i got but i cant get the fan off. i got the bolts off the pulley and i thought that would release it cause thats how its done on the 87 mustang fan but the whole pulley came off but the fan is still attached. i tried to get to the...
  16. warriorpluto

    QUICK! What's the Trick Flow GT40 valve spring kit part number?

    Trick Flow Specialties TFS-2500100 - Trick Flow® Valve Spring Upgrade Kits
  17. warriorpluto

    would these work for

    for gt40p heads nstalled: 121 lbs @ 1.800” Open: 328 lbs @ 1.200” COMP Cams COMP Cams Valve Springs Part Type: Valve Springs Number of Springs Per Valve: Dual Outside Diameter of Outer Spring (in): 1.430 in. Coil Bind Height (in): 1.150 in. Damper Spring...
  18. warriorpluto

    Do 96 Explorer Parts work?

    thanks for that info jrich but i checked my junkyard but i could find a turbo coupe anywhere. :(
  19. warriorpluto

    lincoln mark VII oil pan

    im finishing up the explorer swap and at the junkyard i see an 85 non h.o. mark 7 and a 90 lincoln mark 7. i guess its an h.o. cause it has the same headers like 87-93 mustang. can i use the oil pan, timing cover, and brackets from the 85 or 1990 mark 7?
  20. warriorpluto

    Do 96 Explorer Parts work?

    damn i guess there is no easy work around to get 3.73 gears. lol
Top Bottom
Back
Forums
Menu